Picture 1 of 3
Stock photo
Picture 1 of 3
Stock photo
Sightmark SM39024 Laser Sight
Joe Bob Outfitters (48130)
99.8% positive feedback
Price:
$44.95
Free shipping
Returns:
30 days returns. Seller pays for return shipping.
Condition:
Simply place the base of the bore sight onto the end of the barrel, and it will attach magnetically. Includes a carrying case, three (3) AG3 batteries, and instructions. Real Avid Smart-Torq and Driver Master Set.
- Buy It NowSightmark Triple Duty Universal Boresight
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandSightmark
MPNSM39024
UPC0810119011350
ModelSM39024
eBay Product ID (ePID)129443247
Product Key Features
TypeLaser Sight
All listings for this product
Ratings and Reviews
Most relevant reviews
- Aug 08, 2020Top favorable review
Well built and worth the money
Used it to dial in a 22 rifle,a 22 pistol,and even a 16 gauge shotgun to check the accuracy of the sights. If you clamp the gun and rotate the boresight,you will see a slight rotation of the laser beam on the target,about the same amount on all three firearms,so it must be in the boresight.This can be adjusted out if you take the time to do it,but it got me on the paper as it was.In bright sunlight its a little hard to locate if you're very far out,but quite useful for what it's intended.Good magnet to hold it to the barrel,good quality build,and easy to use. Quite the bargain!Verified purchase: YesCondition: New
- Oct 18, 2015Top critical review
not worth the money
the sightmark its not good product..you can put it on the end of barrel take off and back on and it will not be in the same place accuracy is very poor i would not buy another one or rest my money on a new battery if and when it dies..should bought sitelite bore sightVerified purchase: YesCondition: New
- Mar 28, 2017
better than others
I own a few other brands of laser bore sighters and this one seems to be closer to the alignment of the barrel. I have a marlin 17 HMR with a 3x9x40mm scope that I knew was dead on and I used it to make my judgment. It was dead on with the cross hairs of that scope. PerfectVerified purchase: YesCondition: New
- Jan 03, 2018
Excellent device
This is great product to get you on the paper for fine tuning. What I did was take a rifle that I know is dead on and looked at the laser and cross hair locations at 20 yards. Then take a new rifle/scope set up and set it at the same configuration as the one that is on. Works great, easy to use with the end of the barrel install. You can also use it on AR rifles with flash suppressors. you just have to ensure that device is centered in the suppressor being the opening is bigger than the barrel insert.Verified purchase: YesCondition: New
- Jun 01, 2017
Works good. Works on A2 Birdcage too, with adjustments..
Caution: Get the SM39024 (red) or SM39026 (green). These are the ones with the centering cone. SM39014 does not have it, and is the 'version 1' of this tool. I bought the /24 Red version as most of my scopes and 'red' dots are green. Made it much easier to see which dot belonged to what :) As soon as I got his working, I put it on my BP40CC (carry) and Ruger P89 (house) whose sights were already aligned. It sat flush on both and was dead on. I then put it on a 10/22 and Rem 700 .308. Again, sat flush and dead on. Regardless of what you read, it WILL work on a A2 Birdcage, as long as you have the standard steel one. The centering cone will not fit (too small), but, the outside circumference of the magnetic base is the same size, so all you have to do is match it to the A2 and off you go. I used my thumbnail to align it, and it worked pretty good at ~25yds, being only a couple inches off at 50yds for the final zero. As mentioned, take the batteries out when you are done for the day and the switch WILL get pushed back to ON and kill the batts in short order. Speaking of the batts, the + is the 'flat' side and goes into the batt holder first or 'down'. The - is the 'button', and should be 'up' in the batt holder. The open end of the battholder, with the batt 'button' showing, goes into the laser against the spring. Just for those who didnt figure this out already ;) All in all, a pretty good product so far. Better than most, cheap, 'All-in-One' bore sighters.Verified purchase: YesCondition: New
- Mar 02, 2018
Simple and works great
Quick and easy, after it magnetically attaches to the barrel, I recommend you spin it a bit to ensure it’s centered up. This let’s you get that rough alignment and then you can site in at the range. The tapered end is spring loaded to work on many sizes. I’ve used fro, .17 hmr up to my 308Verified purchase: YesCondition: New
- Jul 25, 2017
Easy, accurate and convenient
Laser was as advertised. A built in magnet attaches device to the end of the pistol barrel. This method may be more accurate and convenient than the style that inserts inside the barrel. The device appears very accurate out to at least 25 yards. I use it to test projectile deflection through various substances at ranges 15 feet or less. The laser establishes the trajectory before the shot is fired. Deviations from that trajectory are then measured. LR-44 batteries are common and easy to replace. Good product at a fair price.Verified purchase: YesCondition: Pre-owned
- Oct 01, 2021
Well worth the money
Trying to sight in several different weapons of different calibers with the same consistency is a task that is not easy. With this Sightmark it makes this difficult task achievable in less time than you would think. This is the third Sightmark that I have purchased over the past year as it is a very good product and a great gift!Verified purchase: YesCondition: New
- Feb 27, 2018
Boresight
This boresight works great just like in the video's,very easy to use. With this I don't have to buy a boresight for every caliber I have. Works great on handgun, rifle and even shotgun. I wished I would have bought one of these years ago.Verified purchase: YesCondition: New
- Oct 11, 2016
Great product
Works great. Very handy and works with all my firearms The on off switch has a tendency to turn itself on so remove the batteries when storing between use.Verified purchase: YesCondition: New
