Est. delivery Mon, Nov 24 - Tue, Dec 16Estimated delivery Mon, Nov 24 - Tue, Dec 16
Returns:
30 days returns. Buyer pays for return shipping. If you use an eBay shipping label, it will be deducted from your refund amount.
Condition:
NewNew
Core Size (in) approx: 74MM- 3Rows. The core of the radiator is welded in vacuum brazing furnace, no epoxy. The tanks are 100% welded by TIG. Ford Model A 1928-1929. Core and Tank: All Aluminum. All Genuine.
Close But No Radiator for my stock 1928 Ford Model A
The Bad:
1. Filler neck was too far back.
2. Filler neck was too short.
3. Overflow tube was only attached at the top when it enters the radiator, not on the side or bottom.
4. Fins were more bent right out of the box than in my radiator that came off the far.
The Good
It seems to be a well built radiator other than what I mentioned above.
They almost made a good product, they just need a little more quality control.
price is good and the product appears to be well built.
everything was good but the filler neck was on the short side. I brought it to their attention and I have no reason to believe they aren't going to insure future radiators have a taller neck. If it's too tall you can always cut if off but if it's short, you scramble.