DENSO is a leading supplier of radiators to OE car makers around the world. All DENSO radiators pass its strict durability and function tests. This part generally fits Toyota vehicles and includes models such as Tacoma with the trims of Base Crew Cab Pickup 4-Door,Base Ext ended Cab Pickup 2-Door,Base Standard Cab Pickup 2-Door,DLX Extended Cab Pickup 2-Door,DLX Standard Cab Pickup 2-Door,Limited Exte nded Cab Pickup 2-Door,Pre Runner Crew Cab Pickup 4-Door,Pre Runner Extended Cab Pickup 2-Door,Pre Runner Standard Cab Pickup 2-Do or,SR5 Extended Cab Pickup 2-Door.
Just like original. it fit perfectly but i will give you a few tips. set the rad in place then loosen the top two bolts of the rad support. the holes will line up perfectly for the four bolts in the front. snug up the 4 mounting bolts then tighten the top rad support bolts. it fits like a glove. if you have a manual transmission like me this rad will sit down about 1.5 inches so will need to get the lower rad hose for the auto transmission. you cannot use your old hose if you have a manual trans. the skid plate fits fine and there is no issue. anyone who has a problem with the installation of this radiator probably ordered the wrong one. there are 3 rads for the first gen Tacoma. be sure to measure your rad and order the correct one.
Other than the four mounting bolts, they were a little tight and kind of had to bend the screws to make it fit. Everything else lined up well. Taco is running cooler now with a new radiator.