Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Leaf Blowers & Vacuums
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Leaf Blowers & Vacuums
At first glance, this blower attachment seems too light weight to be of good quality; however, once I started using it, I must admit it stands up well. I have to stretch to reach my gutters (they are on the second floor) so it is a bit unwieldy. Users should also remember that you have to push back on all that air coming out, so your arms and shoulders can get tired with a lot of use. I don't have a Worx blower so had to adapt the attachment to mine. The pipe end fit pretty well over my blower tube so it worked out well. The two Worx adaptors that come with the blower attachment are really heavy duty so use those if you can. All in all, this blower attachment is pretty much a bargain for the price. I would not hesitate to buy another one.
Verified purchase: Yes | Condition: New
The product itself is made of thin plastic that is very light. When using it the tubes keep becoming unthreaded from one another due to the design of the threads. Taping several tubes together helps. I found that hooking it up to my shop vac does a better job with less mess. There needs to be an adaptor for this application. The tubes need to be longer, thus using fewer pieces to reach the higher gutters. The joints are the weak points.
Verified purchase: Yes | Condition: New
It works okay but the connections are very wobbly; probably need to glue the sections together for greater stability. You could also use plastic gutter downspouts to accomplish the same goal!!
Verified purchase: Yes | Condition: New
I have no real negative things to say Except I had to put duct tape around where the sections joined together. They were too loose if you did not tape them.
Verified purchase: Yes | Condition: New
I knew from the description that this was not a direct fit for a Ryobi P2107 blower. Since the connection was very similar though and it was half the cost as another "Universal Fit" unit I decided to give it a try. The addition of a $1.50 hose clamp was all I did in order to clamp it to the blower. It does not make the connection totally tight but snugs it enough to allow it to be used. In the second picture of description the first tube is already attached to the piece that couples to blower. The coupler has a plastic knob that the tube slides over and into a groove that allows the tube to spin allowing you to direct the nozzle where you want. I found it best to hold the blower with one hand and the first tube with the other to direct the air. With all extensions attached there is some flex and the tubes bow but they remain rigid. I did find that I occasionally did have to retighten the connections as they worked loose. Nothing major plus it gave my arms a chance to rest. It is a bit unwieldly at first but gets much easier with practice. In all this saved me about 16 trips up and down a ladder with only a handful of leaves remaining in gutters.Read full review
Verified purchase: Yes | Condition: New