A well made mainfold!!!!!!!!!!!! Nice wide gasket surfaces!!!!!!!!!!! Well machined !!!!!!!!!!!! The only thing I found was that you have to use studs in the carburator instead of the stock bolts......
Verified purchase: Yes | Condition: New
This was exactly what the tractor needed. I don't know why the original manifold decided to turn into rusty Swiss cheese when the rest of the tractor was sound, but this fixed both vacuum and exhaust leaks. It's a rare thing when the new part easily weighs half again more than the old part.
Verified purchase: Yes | Condition: New
I bought the manifold for my 9N Ford. Its an import from Taiwan, which is to be expected for the price. It seems to good quality and the machined surfaces were good. The casting wall thickness was greater than the original, requiring minor modifications. A bit had to be machined off to clear valve covers. Its thickness was enough greater that carb bolts could not be inserted. Also the extra material hit the throttle linkage requiring a minor bend. Otherwise it bolted up OK and the exhaust flange fit well. Was a good value considering the low cost.
Verified purchase: Yes | Condition: New
Looks to be well made, with machined parts smooth. Went on easily with plenty of room for a socket to tighten the manifold nuts. Only issue I had was that the flange where the tailpipe hooked on to it seemed a bit thick, and the clamp would not close much. That being said I don't see any leaks. Overall seems to be a good value.
Verified purchase: Yes | Condition: New
This part bolted right in place, no alterations required. Machining was good and it sealed up fine. I am well pleased.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Complete Engines & Engine Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Complete Engines & Engine Parts