I have repaired appliances for over 50 years and these parts i purchased ? worked fine however kenmore nor sears or anyone else for that matter list them in their catalogs as to just how many exact applications / Models they actually worked on. FYI they Fit MANY more than just the ones listed in their Parts catalogs. for anyone that is looking for this particular parts in the Future. any unit that uses this style of "Dogs" in the upper agitator will be Satisfied wit THESE as a Direct Replacement and FIT.
Verified purchase: Yes | Condition: New
These dog gits (agitator dogs) are of poor quality. The swivel arm coming off the swivel point, is very thin and probably half the thickness it should be. The gits are quite loose when inserted in place making them prone to break easily. However, I don't know of any alternative manufacturer producing higher quality gits. Hopefully they will last. Perhaps I should have ordered several sets for future use. The defect has nothing to do with the seller however, I believe.
Verified purchase: Yes | Condition: New
Part arrived quickly, it was easy to remove and take aprt the agitator to replace the worn agits dog. Part looked smaller than the space in the agitator, but works just fine. So far no problems. Saved alot of money by repairing it myself.
Verified purchase: Yes | Condition: New
Buying in bulk like this is so helpful when I have repairs to make right away. I can have what I need on hand at a great price. When I can buy in larger quantities, I can be more flexible about the shipping time as long as I keep my supplies ordered. Other companies I order from can get my product to me in less than 24 hours, but it can cost me up to 10X's as much for only 1. I try to keep my repair/sales fee as low as I can, so this is the MUCH better option. Thank you!
Verified purchase: Yes | Condition: New
Thank you so much for sending a high quality product at a great price. The quality of material, plastic, used in making these agitator dogs is great. I have ordered some in the past that were not as good and as a service professional, I paid the price. Thank you for an exceptional quality product and for the quick delivery that you provide.
Verified purchase: Yes | Condition: New
My agitator stripped and would turn both directions by hand. It should only turn one direction and has a silent ratcheting action as it does. It will just turn freely and turning the opposite directon rotates the whole plastic column when working as it should. I shopped for the cheapest price since most of these replacements are identical in quality but all over in price. I wasn't paying 30 or 40 bucks for an 8 or 10 dollar part. I actually only needed the 4 dogs that have teeth and the thrust spacer but bought the whole repair kit. Buy the kit, it's cheap enough. Every part was identical but the rubber flat washer/gasket for under the hex head bolt was just a flat shape. I opted to reuse the thicker, wider factory one since it was still resillient. Perfect, easy install with detailed directions. My disassembly was the tricky part since I did that before I ordered the part. It arrived in a couple days. Works like new. Completely satisfied...Read full review
Verified purchase: Yes | Condition: New
Looked different from what I pulled from my washer. Turns out my agits were snapped at the narrow ends. Good product still working well a month later.
Verified purchase: Yes | Condition: New
These parts do the trick. Depending on how note one washes a load of laundry, these dogs or paws will eventually wear down or self destruct. The last set of four I installed did last about ten years. About the only tools you will need ade a screwdriver to pry off the top. Then a 7/16ths inch socket on a 6" or longer socket extension and a ratchet.. I never had to replace any other parts other than these little things and the job can be done in about ten minutes. These parts fit and look like the original so I'll see how long they last. Inexpensive fix for many brands of washing machines.
Verified purchase: Yes | Condition: New
They came in what appeared to be the original packaging thus making them appear legit. They were easy to install. They work perfectly in my Kenmore. Quality is hard to say. Only time can tell. The last time I replaced these was about ten years ago so if these last that long then I will be able to confirm that the quality is good. So far very happy with them. Go ahead and give these a try!
Verified purchase: Yes | Condition: New
Dem little doggies are great. Showing their teeth and biting into the inside of the agitator so the auger turns with the forward motion of the agitator. Been in there about 2 months and there are still working great. If your agitator auger isn't turning, get some of dem doggies and put them in, it's not hard to do. Woof
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Washer & Dryer Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Washer & Dryer Parts