Truly multi-functional. Key features: backlight, 1,000V, AC/DC, heavy-duty construction. I have not had the chance to try all functions yet, the basic ones of measuring volts, amperes, and ohms are fine.
Verified purchase: Yes | Condition: New
To me, Fluke has always represented the reference standard by which all other are judged. But Fluke meters have also been more expensive than I could justify, so I’ve always made do with “lesser” brands. Some of those so-called lesser brands have served me for decades, but when I finally needed to replace one of them, I thought I would finally get myself a Fluke. A 179 kit with probes and case was almost $400 new, so I bought a used one. I figured that the highly-vaunted Fluke brand, just a few years old, would have to be better than the decades-old “lesser” brand meter that it was to replace. When I got my long-awaited meter, I was immediately disappointed at just how gross and dirty the once-yellow case had become, but I wanted to verify that it was working, so I did some simple testing and comparison to a recently-calibrated meter. It was close enough for my purposes, but no closer than some of my “lesser” meters that haven’t been calibrated in years. So much for Fluke magic. As I was checking out the meter, the battery went dead, so naturally I went to replace it, whereupon I discovered that the battery door was cracked so badly around the screws that pieces fell out when I removed the screws. It was degraded so badly that it wouldn’t stay on anymore. No problem, I thought, I’ll just get a replacement. Which is when I discovered that Fluke parts are even more outrageous that Fluke meters. That little piece of (apparently weak) yellow plastic cost me $20. To put that into perspective, I’ve purchased entire meters for $20, that still look and work fine decades later. $20 for $0.20 worth of plastic is just a rip-off. Having reluctantly ordered the over-priced battery cover, I then started scrubbing on the gross yellow case, first with products that I was sure wouldn’t harm it, and then when that didn’t work, I started working my way up to ever harsher chemicals. It’s REALLY hard to clean. The material used by this legendary brand is just awful! It almost defies cleaning. After taking the mater all apart and working on it for hours, it was finally almost “like new”, but not quite, because in spite of being essentially impossible to clean, it is not impossible to damage. Having the yellow parts so much cleaner called attention to the fact that the clear piece of plastic that covers the display was pretty scratched up, so with less optimism than for the battery door, I searched for a replacement. It’s a little thing about 1” x 3”. The only one I could find at that time was $40, so I decided to sand and polish the one I already had. That worked fine, but wow. The markings on the rubber buttons are worn too, but I couldn’t even find that part, so decided to live with it. Questionable material quality combined with outrageous cost to replace those same materials when they fail…it’s a lousy combination. I’m sure it’s a decent meter, but “having” it is not so pleasing a thing after all as “wanting” it. Read full review
Verified purchase: Yes | Condition: Pre-owned
Top of the Fluke 170 (wasp-waisted) series with high accuracy and features. Download the manual to learn all the features. Has all the reliability and safety that Fluke is known for. The 440 mA fuse on 400 mA range is easily blown, so buy spares. Use rubbing alcohol to remove black grease stains from the non-removable rubber boot.
Verified purchase: Yes | Condition: Pre-owned
The Fluke 179 is a high quality test meter widely used by professionals. It is also great for DIYers such as myself looking for an excellent product. In the short time I have had mine, I have used it for both automotive and household testing purposes. It is not the cheapest alternative available, but it is an accurate US made alternative that purportedly is also very rugged.
Verified purchase: Yes | Condition: New
Have used Fluke Multimeters throughout my career including this model. Quality product for electronic measuring and debug.
Verified purchase: Yes | Condition: Pre-owned
I worked in new product development for over 20 years. Fluke multimeters were always considered the gold standard. I Fluke 179 is a fully professional portable meter. It appears to be very rugged, and well built like the Fluke multimeters that I remember. I also appreciate the built-in safety features.
Verified purchase: Yes | Condition: Pre-owned
This was purchased as a replacement item. The Fluke brand is known for quality products. This is no different.
Verified purchase: Yes | Condition: New
Much better than my cheap little $15 Chinese plastic DMM in every way. More accurate, easier to use, more capabilities, a significant upgrade and a necessity for building electronic audio equipment in my opinion. No issues with the purchase.
Verified purchase: Yes | Condition: Pre-owned
This meter replaces my beloved Fluke 23, which is no longer supported by Fluke. The tech adviser said "time to put it on your trophy shelf". This meter does add temp measurements and is the impeccable quality one expects from Fluke.
Verified purchase: Yes | Condition: Pre-owned
I have used Fluke meters for years and have never been disappointed. This updated model of the venerable Fluke 79 is even better. You can't go wrong with a Fluke.
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Multimeters
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Multimeters
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
