It is exactly as pictured and does what it is described for. It has two side rails for mounting lights, laser, etc. and has a sling stud on the bottom so all you need are sling mounts and you are ready to go. I bought this for a 20 ga knowing it may be to big, but hoping it would fit... it did not. However with a bit of shimming ( a half piece of 3/4 pex tubing did the job, although 1" would have worked better) I did get it to fit tight on my 20 ga mag tube. I wish someone made these for 20 ga tubes as it is a great add on for any home defense shotgun.
Verified purchase: Yes | Condition: New
This product should be one solid built piece then it might handle the abuse of bayoneting. The tube cap wobbles when the hex screw is tightened. It will fall off when shooting or having to use as bayonet. Stick it into a stud and it will break! Can try to mig weld it together or use the bayonet lug piece and make a complete ring to go over the tube cap and weld into a solid piece. It would be great if NcStar designed it into a FUNCTIONAL ONE SOLID PIECE BAYONET LUG. You'll have to take the hex screw out when you want to clean the shotgun! One sold piece that slips on the tube with three hex screws near the bayonet lug end would be a better design. Do these people actually test what they sell? I might try and use a 1" piece of aluminum pipe to tig weld it together to the perfect fit for a m7 or m9! I dought the force will bend the barrel! They should really make it a solid one piece bayonet lug that can take a beating! Not this just that will fly off when shooting Read full review
Verified purchase: Yes | Condition: New
This isn't a bad product for the price. It mounts well on the Mossberg Persuader but they didn't think it through for the end cap. It has already been mentioned that the end cap wiggles a little bit and can come off when the gun is fired. My personal fix is to drill the end cap and simply put a bolt with the same thread count/diameter as the sling stud which I believe was also mentioned before. I have another fix in mind should the bolt not work out but it will require my metal lathe. I think with the right bushing spacer this could also be used to fix the bayonet mounting issue on AR's with 16 1/2" barrel, carbine length gas tube with A2 front sight with the bayonet lug. It would be a much cheaper alternative than what I have seen thus far.
Verified purchase: No
does not fit 590 without major alterations. But I made it work. did not fit bayonet perfectly but slight filing fixed that. only thing on the market i can find for this. ordered 3 more used one already
Verified purchase: Yes | Condition: New
Cool looking but dot not take in to battle as it will drop off the gun on your first stab. It will come off if you fire gun with bayonet on, but still cool looking as hell, I give it good review for wall hanger because I knew what I was buying and happy with my purchase.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Shotgun Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Shotgun Parts