|
Have one to sell?
Sell now - Have one to sell?
|
State | Sales Tax Rate |
---|
After receiving the item, contact seller within | Returns shipping |
---|---|
30 days | Seller pays for return shipping |
Would recommend
Good value
Good quality
Great Splitter + How to Paint!
Love it! The feel is amazing! I am on lowering springs and it scrapes a couple of times a week. Fitment and hardware included is top notch! It accepted paint very well, I actually painted with rattle cans and it turns out MAGNIFICENT! (Yes, rattle cans can have good paint jobs, read further for how I painted it) Step 1 - Prep -Prep surface why wet sanding with 400 grit sandpaper until surface is no longer shiny -Follow up with 800 grit to smooth it out and allow some surface for the paint to bite into. -Wipe with tack cloth/rubbing alcohol and microfiber rag Step 2 - Paint -Shoot with appropriate primer for your color coat (Red color, medium to light grey primer) -Do about three coats with 5-10 minute wait times -Wet Sand primer smooth with 800g sandpaper and wipe off with tack cloth/alcohol -Paint with color coat -Do about 3 coats, no more than four or you'll have issues with your first coats drying. Step 3 - Clear -Being on the front of the car, you are going to want to clear it to prevent rock chips. - Let color coat dry thoroughly (patience is a virtue) and wet sand with 800 grit after about 72 hours (to get out the orange peel) - After you have wiped off the finish with alcohol/tack cloth, time to clear! -USE SPRAY MAX 2K CLEAR! It is a 2 part clear coat that will give you a finish comparable to professional work (About $30 a can) - Spray NO MORE THAN 3 COATS or you WILL GET CRACKS. - Let this clear dry for a long time, I mean like 4-5 DAYS. -Then wet sand down lightly with 800 grit, then 1500, 2000, 4000, and finish with a polishing compound. You're Done! Time to mount it! Just through some 3M tape on obvious bits, and I put the screws in the fender wells, and that's it! Check the photos for finished results!
Verified purchase: Yes | Condition: new | Sold by: magicdrift_aero...
Front mustang chin spoiler
Love how shipping was fast got it in 3 days. Also like the cup gift👌.. only issue I didn’t like is that they don’t supply what you need to install🤷🏼♂️. Honestly they need to start doing that make customers happier. Other wise every thing else is perfect will most defy buy again
Verified purchase: Yes | Condition: new | Sold by: magicdrift_aero...
Awesome Product
I break this same chin spoiler all the time and I’ve been paying almost $200 online for it. This one is great quality and saves me a lot of money.
Verified purchase: Yes | Condition: new | Sold by: magicdrift_aero...
Ran on static mustang
Lip held up very well to being scraped often
Verified purchase: Yes | Condition: new | Sold by: magicdrift_aero...
Better than expected
Love the new front spoiler. Highly recommended.
Verified purchase: Yes | Condition: new | Sold by: magicdrift_aero...