Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Other Automotive Hand Tools
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Other Automotive Hand Tools
After servicing the twin carbs for the BMW f650 i had set the mixture screw according to the manual (Haynes) after initially firing the bike and warming it up i plugged in this tool to each spark to verify the combustion colour and it confirmed that all setup was prompt. I think it's expensive for the use but it does give that after mind peace that what u did and how u set it up is indeed correct. It's that little extra. Sometimes settings can be in place but something could be causing a problem. With this tool it confirms that the firing is either set correctly or not. Very useful is u don't have a manual and u want to find that right spot for the mixture. My CBR 600 allows tuning from the sides so u can adjust on idle or at 1/4 throttle opening. And 1/2 on wards and the colour should show orange as u want it slightly rich on the opening side. Read full review
Verified purchase: Yes | Condition: New
Very cheaply made but it does do the job.. The copper compression washer that is supplied is way to big and falls off..this is quite a problem if your doing a 4cyl with the plugs set deep in the head as you'll spend quite some time trying to fish out the washer... The plastic mirror fitted on the extension tube also falls off easily...
Verified purchase: Yes | Condition: New
1st class tool ,a must if you need to set mixture ,easy to use, works a treat ,every toolbox should have one
Verified purchase: Yes | Condition: New
Cant wait to use it on my mukini carbs...Great Utube videos on how to set it up.
Verified purchase: Yes | Condition: New
Takes all the guesswork out of mixture setting because you can see the effect of adjustments directly. Quite why it is described as for "compression ratio and firing" I don't know, it does neither of them, but it was the best priced 12mm Colortune kit I could find.
Verified purchase: Yes | Condition: New