 |
Works great,and I use it everyday at my job,
Verified purchase: Yes | Condition: New
I have used this about 20 times. Still trying to give the "fieldsense" a fair shake. It seem that when fieldsense is used with the probes in the meter and your finger on the back little pad that the voltage readings can be all over the board as far as the accuracy. When you use the fieldsense and have the black probe touching a good ground then the readings are closer but usually about 10-15 volts higher than the actual voltage. It is at least good for checking wires that are going through a gutter that are not color coded to determine which ones are power or neutral. The nice thing about the meter is the wide jaw that allows you to get amperage readings on 3/0 wire. Overall I'm happy with this meter. The back light is also a GREAT feature. Might be a better deal if it were priced a bit lower tho. If something happens to this meter I would probably just go back to my T5-1000 and not purchase another T6 model Read full review
Verified purchase: Yes | Condition: Pre-owned
Works fine with leads but even with proper use voltage can be notably off and even current readings not always accurate. It’s a cool toy but when the values matter rather than is it 120 or 240 volts or some current draw or not, I switch to something else. I’m using residentially so maybe with higher currents/ voltages it would be closer. I was reading a 350 watt heater on a circuit in a panel box. With two other meters it read 3.3 amps. This read 4.5. At 16 amps they all agreed. Voltage on a 120 breaker read 125 volts with leads on this and another meter. Read 135 with volt sense and yes, negative lead was properly stowed per directions, finger on ground and green light good ground indication on meter lit. Many times this voltage error doesn’t matter, but if you need and accurate value. You may not get it. I have even had it read over 300 volts on a 120 wire but was in a tight panel box so guessing it was picking up from the other nearby wires as well. No other wires were even slightly in the jaws though so not ideal as panel boxes are frequently pretty tight. Will I continue to use this, yes but selectively. I carry other meters with anyway so not a huge deal.Read full review
Verified purchase: Yes | Condition: New
Don’t waste your time or money. This meter is highly inaccurate. I was really hoping for the best. Still reserving hope that the bugs will be worked out. Returned mine immediately after testing its accuracy.
Verified purchase: Yes | Condition: New
The field sense is great! Do not even have to remove a wire but to take a voltage reading.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Multimeters
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Multimeters
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
