Picture 1 of 5

Have one to sell?

Sell now

Fein 72905361120 120-Volt 14-Inch Durable Metal Cutting Chop Saw - MCCS14

Name: Fein 72905361120 120-Volt 14-Inch Durable Metal Cutting Chop Saw - MCCS14
Brand: FEIN
Price: 449.95 USD
Availability: InStock
Rating: 5.0 (25 reviews)

Authorized Fein Dealer + Full Factory Warranty!!!

Factory Authorized Outlet

(217295)

US $449.95

List price US $499.95 (10% off)

$37.49 for 12 months with *

Condition:

New

Quantity:

5 available / 3 sold

Additional service available

Breathe easy. Free shipping and returns.

People are checking this out. 8 have added this to their watchlist.

Shipping:

Free 2-3 day shipping

Get it between Sat, May 25 and Tue, May 28 to 43230. See detailsfor shipping

Located in: Ontario, California, United States

Returns:

30 days returns. Seller pays for return shipping. See details- for more information about returns

Payments:

*$37.49 for 12 months. Minimum purchase required.

Earn up to 5x points when you use your eBay Mastercard®. Learn moreabout earning points with eBay Mastercard

Shop with confidence

FEIN Authorized seller

Top Rated Plus

Top rated seller, fast shipping, and free returns. Learn more- Top Rated Plus - opens in a new window or tab

eBay Money Back Guarantee

Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab

Report this item - opens in new window or tab

Seller assumes all responsibility for this listing.

eBay item number:204212853484

Last updated on May 21, 2024 11:20:30 PDTView all revisionsView all revisions

Item specifics

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab

Battery Included: T

Voltage: 18V

EAN: 663695102420

Length: 20

Width: 12

Height: 18

Power Source: CORDLESS

Battery Technology: LITHIUM-ION

Item Length: 20

Item Width: 12

Item Height: 18

UPC: 663695102420

Brand: FEIN

Model: 72905361120

MPN: 72905361120

About this product

Product Identifiers

Brand

FEIN

MPN

72905361120

Ean

0663695102420

UPC

0663695102420

Model

72905361120

eBay Product ID (ePID)

4031084257

Dimensions

Weight

54lbs.

Length

24.5in

Additional Product Features

Custom Bundle

Saw Blade Type

Circular Saw Blade

Featured Refinements

Metal Band Saw

Item description from the seller

Seller assumes all responsibility for this listing.

eBay item number:204212853484

Last updated on May 21, 2024 11:20:30 PDTView all revisionsView all revisions

Shipping and handling

Item location:

Ontario, California, United States

Ships to:

United States

Excludes:

PO Box, APO/FPO, Afghanistan, Africa, Alaska/Hawaii, Albania, American Samoa, Andorra, Armenia, Austria, Azerbaijan Republic, Bangladesh, Barbados, Belarus, Belgium, Bhutan, Bosnia and Herzegovina, Bulgaria, Central America and Caribbean, China, Cook Islands, Cyprus, Czech Republic, Denmark, Estonia, Fiji, Finland, France, French Guiana, French Polynesia, Georgia, Germany, Gibraltar, Greece, Guadeloupe, Guam, Guernsey, Hungary, Iceland, India, Ireland, Italy, Japan, Jersey, Kazakhstan, Kiribati, Kyrgyzstan, Latvia, Libya, Liechtenstein, Lithuania, Luxembourg, Macedonia, Maldives, Malta, Marshall Islands, Martinique, Micronesia, Middle East, Moldova, Monaco, Mongolia, Montenegro, Nauru, Nepal, New Caledonia, New Zealand, Niue, Norway, Pakistan, Palau, Papua New Guinea, Poland, Portugal, Republic of Croatia, Reunion, Romania, Russian Federation, San Marino, Serbia, Slovakia, Slovenia, Solomon Islands, South America, South Korea, Southeast Asia, Spain, Sri Lanka, Svalbard and Jan Mayen, Sweden, Switzerland, Tajikistan, Tonga, Turkmenistan, Tuvalu, US Protectorates, Ukraine, United Kingdom, Uzbekistan, Vanuatu, Vatican City State, Venezuela, Wallis and Futuna, Western Samoa

Shipping and handling	Each additional item	To	Service	Delivery*See Delivery notes
Free shipping	Free	United States	Standard Shipping (FedEx Ground or FedEx Home Delivery®)	Free 2-3 day shipping Get it between Sat, May 25 and Tue, May 28 to 43230

Notes - Delivery *Estimated delivery dates include seller's handling time, origin ZIP Code, destination ZIP Code and time of acceptance and will depend on shipping service selected and receipt of cleared payment. Delivery times may vary, especially during peak periods.

Handling time

Will usually ship within 1 business day of receiving cleared payment.

Taxes

Taxes may be applicable at checkout. Learn moreLearn more about paying tax on eBay purchases.

Return policy

After receiving the item, contact seller within	Refund will be given as	Return shipping
30 days	Money Back	Seller pays for return shipping

Refer to eBay Return policyopens in a new tab or window for more details. You are covered by the eBay Money Back Guaranteeopens in a new tab or window if you receive an item that is not as described in the listing.

Payment details

Payment methods

Special financing available

Select PayPal Credit at checkout to have the option to pay over time.

Qualifying purchases could enjoy No Interest if paid in full in 6 months on purchases of $99 or more. Other offers may also be available.

Interest will be charged to your account from the purchase date if the balance is not paid in full within 6 months. Minimum monthly payments are required. Subject to credit approval. See terms- for PayPal Credit, opens in a new window or tab

The PayPal Credit account is issued by Synchrony Bank.

Factory Authorized Outlet

99.3% positive feedback

873K items sold

Visit store Contact

Joined Nov 2008

Detailed seller ratings

Average for the last 12 months

Accurate description

5.0

Reasonable shipping cost

4.9

Shipping speed

5.0

Communication

5.0

Popular categories from this store

See allcategories

CollectiblesCraftsEverything ElseClothing, Shoes & AccessoriesToys & HobbiesPet SuppliesJewelry & WatchesConsumer ElectronicsSpecialty Services

Seller feedback (235,833)

r***a (633)- Feedback left by buyer.

Past 6 months

Verified purchase

Excellent SELLER! Genuine Milwaukee PACKOUT™ 48-73-8430C 193PC Class B Type III First Aid Kit, as pictured and described, carefully packed, shipped; arrived FAST in new, unused condition, ahead of estimated date. Super PRO INTEGRITY & CUSTOMER SERVICE! Our shop has happily bought again & again from this SELLER! (Tip: we wait for 15-20% coupon/discount days. This SELLER is RELIABLE and maintains PROMPT & COURTEOUS COMMUNICATION.)

Milwaukee 48-73-8430C 193PC Class B Type III PACKOUT First Aid Kit (#403747990593)

b***b (495)- Feedback left by buyer.

Past month

Verified purchase

As advertised this was 100% new and in the OEM packaging. It arrived 2-days early! The price was awesome. GREAT SELLER!

Milwaukee 0886-20 M18 18V 2,350-Rpm Adjustable Jobsite Fan w/Adapter - Bare Tool (#175433455585)

i***a (2207)- Feedback left by buyer.

Past 6 months

Verified purchase

Fast shipment, great price, received Milwaukee 48-22-8426 Rolling Packout as listed. Will be back for more, awesome seller and highly recommeneded, thank you!! A+++

Milwaukee 48-22-8426 250-Pound Capacity Polymer Packout Rolling Tool Box (#403914925862)

See all feedback

Product ratings and reviews

Learn more

Write a review

5.0

25 product ratings

25 users rated this 5 out of 5 stars
0 users rated this 4 out of 5 stars
0 users rated this 3 out of 5 stars
0 users rated this 2 out of 5 stars
0 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

See all 23 reviews

by nevetsrednut1956
May 20, 2020Top favorable review
You get what you pay for.
I have been using the Harbor Freight 64.5 band saw for several years and while it works great, it is very slow. I have been reading about and watching videos of the Fein 14 inch Slugger for a while now and so I decided to get one to see what all the hoopla was all about. The package came in two business days. It is well boxed from the factory and arrived undamaged. I had quite a bit of metal that needed to be cut so I brought the saw down stairs....it weighs in at about 65 lbs....not light but not all that heavy to me. I set it up on my workbench and plugged it in. The chain that holds the cutter wheel down while moving it is a bit tight and sticks into the hook by the plastic shield with the warning on it. It was easy to bend and I think I will keep the plastic shield on as it keeps the ... I have been using the Harbor Freight 64.5 band saw for several years and while it works great, it is very slow. I have been reading about and watching videos of the Fein 14 inch Slugger for a while now and so I decided to get one to see what all the hoopla was all about. The package came in two business days. It is well boxed from the factory and arrived undamaged. I had quite a bit of metal that needed to be cut so I brought the saw down stairs....it weighs in at about 65 lbs....not light but not all that heavy to me. I set it up on my workbench and plugged it in. The chain that holds the cutter wheel down while moving it is a bit tight and sticks into the hook by the plastic shield with the warning on it. It was easy to bend and I think I will keep the plastic shield on as it keeps the little chips from hitting my face. I always wear eye protection and I also wear hearing protection although this saw is a lot quieter than some of the other cold cut saws I have used and seen. Using it is easy...a two safety switch system. You have to pull both in towards the handle for the saw to run. Cutting 1.5" x .5 inch square bar was very easy. Did 50 cuts in less than 20 minutes...way way faster than the HF band saw. Cuts were accurate and square. Cut some cold rolled 3/4 round and did that very easily. I took my time cutting, not forcing the cut as the blade really does the work easily. I took a tip from an old timey machinist who uses one of these by spraying the blade with WD40 every 5 cuts or so....just a quick spray while the blade is moving on both sides. He says that the blades will last a lot longer by doing this. It does keep the sparks down although this saw has very few of those...a whole lot less than my Milwaukee abrasive chop saw. And NO DUST!!!!! The chips will land mostly in the tray in the back of the saw although some will bounce around outside the saw and onto the work bench. Wear a heavy duty shirt that will not allow the chips to stick to you. I made the mistake of wearing a wool sweater and I was picking chips out of it...not fun. Make sure you have a shop vac and a wide broom handy. Cleaning up is a lot easier with those. The base is flat and cast...not like some of the other saws that have pressed sheet steel and are not all that flat. Not sure of the longevity of the blade but so far it is holding up very well cutting 1/2 inch thick steel. I hear people getting up to a 1000 cuts....we will see. The blades are around 120 dollars or so which breaks down to about 8 cents a cut depending on if you get 1000 cuts. Even at a slightly higher cost per cut, it is well worth the time saved over other cutting methods. I highly recommend this saw. Built better than many of the others and the blade seems to be very well made. Yeah it is a bit more expensive but as the old timey machinist told me....you get what you pay for.
Verified purchase: YesCondition: NewSold by: cpo-outlets
by lr_tig_magic
Feb 21, 2021
Best Quality Saw!
I bought the 14” Fein Slugger Dry Cut Metal Saw over 6 months ago. I bought this saw for my own shop at home, but I use an Evolution 14” saw at work. The Evolution is still 1000X better than any abrasive saw, but the Slugger blows it way out of the water! There is really no comparison between them. The Evolution’s base is about as flat as a pretzel, it’s stamped, thin sheet steel with waves, peaks, low-points, and a super rough surface. You can’t even put a square up the front edge to true the fence angle up to the blade. The angle gauge is completely useless and inaccurate, so if you need any amount of precision, you’ll have to dial it in every time through trial and error. Basically it’s a guessing game with the Evo. Beyond that, the work holding mechanism is not very rigid for several ... I bought the 14” Fein Slugger Dry Cut Metal Saw over 6 months ago. I bought this saw for my own shop at home, but I use an Evolution 14” saw at work. The Evolution is still 1000X better than any abrasive saw, but the Slugger blows it way out of the water! There is really no comparison between them. The Evolution’s base is about as flat as a pretzel, it’s stamped, thin sheet steel with waves, peaks, low-points, and a super rough surface. You can’t even put a square up the front edge to true the fence angle up to the blade. The angle gauge is completely useless and inaccurate, so if you need any amount of precision, you’ll have to dial it in every time through trial and error. Basically it’s a guessing game with the Evo. Beyond that, the work holding mechanism is not very rigid for several reasons. The first, most obvious one is just that the entire base is a flimsy, pretzeled up piece of sheet steel. Second, the vibration of the saw and workpiece aren’t too bad, but there’s way more vibration and blade deflection & walking than the Slugger. The third only applies when trying to make a miter cut, as the movable jaw can’t provide sufficient surface area or the proper balance of clamping forces to support the workpiece at any angle other than 90°, so the workpiece moves, causing the angle to come out wrong every time. The Evolution blades cut much slower than the Slugger blades, they vibrate, walk, deflect, and don’t maintain smooth cutting action like the Slugger blades do. The Slugger is a beast, weighing over 60lbs. The base is very flat and has a super smooth surface finish, as do the vise jaws. The base is somewhere around 1 inch thick and is a solid casting, most likely machined from MIC-6 or some similar cast tool & jig plate alloy. The cutting action is very quiet, extremely fast and smooth. You can’t feel the teeth of the blade contacting the work, it’s just a swift glide through the material every time. It’s very consistent, precise, and leaves a much better finish without burrs relative to the Evo or any other metal cutting method/machine except for maybe a good milling machine! The Slugger is just a beautiful machine in every way. It’s solid, it was very obviously made with great precision and attention to quality and detail. If you’re someone who appreciates, and values precision, quality, accuracy, repeatability, efficiency, and craftsmanship, then this is THE machine for you. It is absolutely worth every penny to have such a well built saw that you can rely on to produce high quality results every time and will hold up to industrial use for years to come. For me, it’s also really nice that I can make cuts without generating a lot of noise, and without any dust or sparks, or surface contaminants. If you need a great saw, you will never regret investing in the Slugger.
Condition: NewSold by: cpo-outlets
by rusty_bolts
Nov 13, 2019
Nice clean quiet cuts. Heavy duty, well made, except for the little clear plastic shield.
Works great. Cuts smooth and straight. Much quieter than a usual abrasive type chop saw. The shavings that come off are hot and sharp, so watch where you put your hands when you're done. The only thing I don't like is the little clear plastic shield which seems like an afterthought, and isn't really necessary if you're wearing eye or face protection, so I might just take it off. The saw is pretty heavy, so it's not something I would want to carry around very far.Works great. Cuts smooth and straight. Much quieter than a usual abrasive type chop saw. The shavings that come off are hot and sharp, so watch where you put your hands when you're done. The only thing I don't like is the little clear plastic shield which seems like an afterthought, and isn't really necessary if you're wearing eye or face protection, so I might just take it off. The saw is pretty heavy, so it's not something I would want to carry around very far.
Verified purchase: YesCondition: NewSold by: spreetail
by dan_merrick
Apr 10, 2019
EXCELLENT metal cutting tool.
This cutter cuts so well it startled me. My first cut was a 2" 10 gauge square steel tube. It took less than 10 seconds to cut it. The cut was beautiful and I could touch it immediately. My older but, brand new high RPM cutter (with a metal cutting carbide blade) would have taken 100 seconds, caused the metal to glow red hot and distorted the cut. Considering you get a new blade on the device the price is competetive.This cutter cuts so well it startled me. My first cut was a 2" 10 gauge square steel tube. It took less than 10 seconds to cut it. The cut was beautiful and I could touch it immediately. My older but, brand new high RPM cutter (with a metal cutting carbide blade) would have taken 100 seconds, caused the metal to glow red hot and distorted the cut. Considering you get a new blade on the device the price is competetive.
Verified purchase: YesCondition: NewSold by: cpo-outlets
by adtrailers
Oct 01, 2019
Better than I expected!
I build metal fab projects and burned up a 20yr old Dewalt abrasive chop saw a couple weeks ago. I didn't want another abrasive saw, so I started doing research. This Fein Slugger is very impressive and the cuts are smooth and exact. The saw also saves so much time because the metal has smooth edges that are ready to weld. I'm very happy so far.
Verified purchase: YesCondition: NewSold by: factory_authorized_outlet

Shop by category

Picture 1 of 5

Fein 72905361120 120-Volt 14-Inch Durable Metal Cutting Chop Saw - MCCS14

Additional service available

Shop with confidence

Item specifics

About this product

Product Identifiers

Dimensions

Additional Product Features

Item description from the seller

Shipping and handling

Return policy

Payment details

Factory Authorized Outlet

Detailed seller ratings

Average for the last 12 months

Popular categories from this store

Seller feedback (235,833)

Product ratings and reviews

Most relevant reviews

You get what you pay for.

Best Quality Saw!

Nice clean quiet cuts. Heavy duty, well made, except for the little clear plastic shield.

EXCELLENT metal cutting tool.

Better than I expected!

More to explore :

Picture 1 of 5

Fein 72905361120 120-Volt 14-Inch Durable Metal Cutting Chop Saw - MCCS14

Additional service available

Shop with confidence

Item specifics

About this product

Product Identifiers

Dimensions

Additional Product Features

Item description from the seller

Shipping and handling

Return policy

Payment details

Factory Authorized Outlet

Detailed seller ratings

Average for the last 12 months

Popular categories from this store

Seller feedback (235,833)

Product ratings and reviews

Most relevant reviews

You get what you pay for.

Best Quality Saw!

Nice clean quiet cuts. Heavy duty, well made, except for the little clear plastic shield.

EXCELLENT metal cutting tool.

Better than I expected!

More to explore :

Related Searches