YearMakeModelTrimEngine

Picture 1 of 5

Have one to sell?

Sell now

S/S Catback Exhaust Fits 10-16 Audi S4 B8/8.5 3.0L TFSI AT/MT AWD By OBX

Name: S/S Catback Exhaust Fits 10-16 Audi S4 B8/8.5 3.0L TFSI AT/MT AWD By OBX
Brand: OBX Racing Sports
Price: 241.38 USD
Availability: InStock
Rating: 1.67 (3 reviews)

Bigdawgtuning14

(4242)

US $241.38/ea

Was US $1,206.89

Save US $965.51 (80% off)

No Interest if paid in full in 6 mo on $99+ with PayPal Credit*

Condition:

New

Compatibility:

See compatible vehicles

Quantity:

2 available6 sold

Bulk savings quantity 1

Bulk savings:

Additional service available

Shop with confidence

eBay Money Back Guarantee

Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab

Report this item - opens in new window or tab

Seller assumes all responsibility for this listing.

eBay item number:175602438834

Last updated on May 28, 2024 11:36:02 PDTView all revisionsView all revisions

Compatibility

This part is compatible with 22 vehicle(s)

Year	Make	Model	Trim	Engine
2016	Audi	S4	Base Sedan 4-Door	3.0L 2995CC 183Cu. In. V6 GAS DOHC Supercharged
2016	Audi	S4	Premium Plus Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2016	Audi	S4	Prestige Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2016	Audi	S4	Progressiv Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2016	Audi	S4	Technik Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2015	Audi	S4	Base Sedan 4-Door	3.0L 2995CC 183Cu. In. V6 GAS DOHC Supercharged
2015	Audi	S4	Premium Plus Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2015	Audi	S4	Prestige Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2015	Audi	S4	Progressiv Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2015	Audi	S4	Technik Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2014	Audi	S4	Base Sedan 4-Door	3.0L 2995CC 183Cu. In. V6 GAS DOHC Supercharged
2014	Audi	S4	Base Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2014	Audi	S4	Premium Plus Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2014	Audi	S4	Prestige Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2013	Audi	S4	Base Sedan 4-Door	3.0L 2995CC 183Cu. In. V6 GAS DOHC Supercharged
2013	Audi	S4	Base Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2012	Audi	S4	Base Sedan 4-Door	3.0L 2995CC 183Cu. In. V6 GAS DOHC Supercharged
2012	Audi	S4	Base Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged
2011	Audi	S4	Base Sedan 4-Door	3.0L 2995CC 183Cu. In. V6 GAS DOHC Supercharged
2011	Audi	S4	Base Sedan 4-Door	3.0L 2995CC V6 GAS DOHC Supercharged

Portions of the information contained in this table have been provided by bigdawgtuning14

Item specifics

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...

Brand: OBX Racing Sports

Type: Cat Back Exhaust Kit

Labels & Certifications: EPA

Manufacturer Warranty: Other: See Item Description

Manufacturer Part Number: 14-1107-4

Features: Cat Back

Certification: EPA Certification: LLD CN276017 8613969998821

UPC: 704455133824

Item description from the seller

Bigdawgtuning14

93.1% positive feedback

20K items sold

Visit store Contact

Joined Jan 2014

Usually responds within 24 hours

Big Dawg Tuning is an authorized seller of OBX Racing Sports. Founded in 1988, OBX Products offers an extensive range of high quality aftermarket automotive accessories for import and domestic ...

Detailed seller ratings

Average for the last 12 months

Accurate description

4.7

Reasonable shipping cost

4.2

Shipping speed

4.9

Communication

4.9

Popular categories from this store

See allcategories

BeckerBecker ExhaustMaximizerMaximizer Blow Off ValveMaximizer ExhaustMaximizer High PerformanceMaximizer MufflerMaximizer WastegateMUFFLERS

Seller feedback (4,762)

This item (1)

All items (4,762)

r***o (332)- Feedback left by buyer.

Past 6 months

Verified purchase

The clamps failed causing the exhaust to fall off. I had to order another exhaust and have it welded together because the second exhaust fell off as well.

See all feedback

Product ratings and reviews

Learn more

Write a review

1.7

3 product ratings

0 users rated this 5 out of 5 stars
0 users rated this 4 out of 5 stars
1 users rated this 3 out of 5 stars
0 users rated this 2 out of 5 stars
2 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

See all 3 reviews

by cgeo3414
Jan 17, 2020
Great sound and performance at the cost of blood sweat and tears
I bought this exhaust mid 2018 and am writing this review January 2020. Pro's - Welds are great - Sound is very good - Can't beat the price Con's - Fitment is not perfect! Do not expect this to bolt on with no issues. ~ It touched one of the cross members and vibrated badly; solution was to hammer a dent into the pipes. ~ The hangers do not put the mufflers in the right area. - Supplied clamps and hardware were not sufficient; bolts broke, clamps failed, or the clamps could not tighten down enough to keep the joints from moving. - The expanded slip joints were WAY too big. It was VERY difficult to keep the mufflers from losing position. - The right side muffler section was in two pieces, this made it even more difficult to maintain it's position. - The rear mufflers are ... I bought this exhaust mid 2018 and am writing this review January 2020. Pro's - Welds are great - Sound is very good - Can't beat the price Con's - Fitment is not perfect! Do not expect this to bolt on with no issues. ~ It touched one of the cross members and vibrated badly; solution was to hammer a dent into the pipes. ~ The hangers do not put the mufflers in the right area. - Supplied clamps and hardware were not sufficient; bolts broke, clamps failed, or the clamps could not tighten down enough to keep the joints from moving. - The expanded slip joints were WAY too big. It was VERY difficult to keep the mufflers from losing position. - The right side muffler section was in two pieces, this made it even more difficult to maintain it's position. - The rear mufflers are 2.5" inlet, dual 2.25 outlet. The size is fine, but the internal routing is shaped like an "h". This makes it so the "straight through" tip is the only one that gets soot on it. Ideally, I would have liked to see 2.5" in and single 2.5" out. Then supply "Y" pipes and the four tips. This would allow the installer to adjust the tips any way necessary. - The exhaust tips are welded on. Clamped on tips would've helped in getting everything lined up. It would have also been nice when... - The exhaust tips are RUSTING. Because they are welded on, I will need to remove the exhaust, cut the tips off, and HOPEFULLY there's enough piping left to clamp on another set. If I didn't have to dent the pipe and now have to cut the tips off and deal with the odd flow I would recommend this setup to someone willing to deal with the other issues. It does sound great with my headers though!
Condition: NewSold by: allmotorsports11
by aria_mat
Nov 09, 2018
Perfect fit but missing clamps
It fits awesome, welds are clean and it sounds really good with headers. Just the down pipes alone from IE or CTS is nearly the price of this full exhaust, and it includes the downpipes. My only issue was it had no clamps, or hardware which is deceiving since it says it comes with them and there is a picture of some clamps. It was a major hassle to try and go to multiple stores to find enough clamps for the job.It fits awesome, welds are clean and it sounds really good with headers. Just the down pipes alone from IE or CTS is nearly the price of this full exhaust, and it includes the downpipes. My only issue was it had no clamps, or hardware which is deceiving since it says it comes with them and there is a picture of some clamps. It was a major hassle to try and go to multiple stores to find enough clamps for the job.
Verified purchase: YesCondition: NewSold by: racingpartsdepot
by cgeo3414
Jan 17, 2020
Great sound and performance at the cost of blood sweat and tears
I bought this exhaust mid 2018 and am writing this review January 2020. Pro's - Welds are great - Sound is very good - Can't beat the price Con's - Fitment is not perfect! Do not expect this to bolt on with no issues. ~ It touched one of the cross members and vibrated badly; solution was to hammer a dent into the pipes. ~ The hangers do not put the mufflers in the right area. - Supplied clamps and hardware were not sufficient; bolts broke, clamps failed, or the clamps could not tighten down enough to keep the joints from moving. - The expanded slip joints were WAY too big. It was VERY difficult to keep the mufflers from losing position. - The right side muffler section was in two pieces, this made it even more difficult to maintain it's position. - The rear mufflers are 2.5" inlet, dual ... I bought this exhaust mid 2018 and am writing this review January 2020. Pro's - Welds are great - Sound is very good - Can't beat the price Con's - Fitment is not perfect! Do not expect this to bolt on with no issues. ~ It touched one of the cross members and vibrated badly; solution was to hammer a dent into the pipes. ~ The hangers do not put the mufflers in the right area. - Supplied clamps and hardware were not sufficient; bolts broke, clamps failed, or the clamps could not tighten down enough to keep the joints from moving. - The expanded slip joints were WAY too big. It was VERY difficult to keep the mufflers from losing position. - The right side muffler section was in two pieces, this made it even more difficult to maintain it's position. - The rear mufflers are 2.5" inlet, dual 2.25 outlet. The size is fine, but the internal routing is shaped like an "h". This makes it so the "straight through" tip is the only one that gets soot on it. Ideally, I would have liked to see 2.5" in and single 2.5" out. Then supply "Y" pipes and the four tips. This would allow the installer to adjust the tips any way necessary. - The exhaust tips are welded on. Clamped on tips would've helped in getting everything lined up. It would have also been nice when... - The exhaust tips are RUSTING. Because they are welded on, I will need to remove the exhaust, cut the tips off, and HOPEFULLY there's enough piping left to clamp on another set. If I didn't have to dent the pipe and now have to cut the tips off and deal with the odd flow I would recommend this setup to someone willing to deal with the other issues. It does sound great with my headers though!
Condition: NewSold by: allmotorsports11

Shop by category

Confirm this item fits

Add your vehicle details to make sure this item fits.

Picture 1 of 5

S/S Catback Exhaust Fits 10-16 Audi S4 B8/8.5 3.0L TFSI AT/MT AWD By OBX

Additional service available

Shop with confidence

Compatibility

Item specifics

Item description from the seller

Bigdawgtuning14

Detailed seller ratings

Popular categories from this store

Seller feedback (4,762)

Product ratings and reviews

Most relevant reviews

Great sound and performance at the cost of blood sweat and tears

Perfect fit but missing clamps

Great sound and performance at the cost of blood sweat and tears

More to explore :

Shop Top Sellers and Highly Rated Products in Exhaust System Kits

Best Sellers

Top Rated

Confirm this item fits

Add your vehicle details to make sure this item fits.

Picture 1 of 5

S/S Catback Exhaust Fits 10-16 Audi S4 B8/8.5 3.0L TFSI AT/MT AWD By OBX

Additional service available

Shop with confidence

Compatibility

Item specifics

Item description from the seller

Bigdawgtuning14

Detailed seller ratings

Popular categories from this store

Seller feedback (4,762)

Product ratings and reviews

Most relevant reviews

Great sound and performance at the cost of blood sweat and tears

Perfect fit but missing clamps

Great sound and performance at the cost of blood sweat and tears

More to explore :

Shop Top Sellers and Highly Rated Products in Exhaust System Kits

Best Sellers

Top Rated

Related Searches