Picture 1 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 2 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 3 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 4 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 5 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 6 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 7 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 8 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 9 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 10 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 11 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate - Picture 12 of 12

Have one to sell?

Sell now

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate

Audiyeah-1

(17169)

US $51.89/ea

or Best Offer

Condition:

New

Quantity:

More than 10 available / 126 sold

Bulk savings quantity 1

Bulk savings:

Buy 4 or more for 49.81 each one

Breathe easy. Free shipping and returns.

This one's trending. 126 have already sold.

Pickup:

Free local pickup from Orange ST, Bloomington, 92316 CA, United States 18550

Shipping:

Free Standard Shipping. See detailsfor shipping

Located in: Orange ST, Bloomington, 92316 CA, United States

Delivery:

Estimated between Thu, May 16 and Sat, May 18 to 43230

Returns:

30 days returns. Seller pays for return shipping. See details- for more information about returns

Payments:

Special financing available. See terms and apply now- for PayPal Credit, opens in a new window or tab

Earn up to 5x points when you use your eBay Mastercard®. Learn moreabout earning points with eBay Mastercard

Shop with confidence

Top Rated Plus

Trusted seller, fast shipping, and easy returns. Learn more- Top Rated Plus - opens in a new window or tab

eBay Money Back Guarantee

Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab

Report this item - opens in new window or tab

Seller assumes all responsibility for this listing.

eBay item number:165704968989

Last updated on Apr 29, 2024 22:44:05 PDTView all revisionsView all revisions

Item specifics

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...

Brand: VEVOR

MPN: BCBH4T

Country/Region of Manufacture: China

Operation: Manual

Custom Bundle: No

Modified Item: No

Setting Position: Tilting

Tilting: Yes

Tilting Range: 0-45degree (both sides)

Overall Dimension: 7x5x3.5inch (178x125x89mm)

Overall Weigh: 15lbs (7kg)

Feature: ESCP

UPC: 197988787013

Item description from the seller

Seller assumes all responsibility for this listing.

eBay item number:165704968989

Last updated on Apr 29, 2024 22:44:05 PDTView all revisionsView all revisions

Shipping and handling

Item location:

Orange ST, Bloomington, 92316 CA, United States

Ships to:

Canada, United States

Excludes:

PO Box, APO/FPO, Africa, Anguilla, Antigua and Barbuda, Aruba, Asia, Bahamas, Barbados, Belize, Bermuda, British Virgin Islands, Cayman Islands, Costa Rica, Dominica, Dominican Republic, El Salvador, Europe, French Guiana, French Polynesia, Greenland, Grenada, Guadeloupe, Guatemala, Haiti, Honduras, Jamaica, Libya, Martinique, Mexico, Middle East, Montserrat, Netherlands Antilles, New Caledonia, Nicaragua, Oceania, Panama, Reunion, Russian Federation, Saint Kitts-Nevis, Saint Lucia, Saint Pierre and Miquelon, Saint Vincent and the Grenadines, South America, Southeast Asia, Trinidad and Tobago, Turks and Caicos Islands, Ukraine, Venezuela, Virgin Islands (U.S.)

Shipping and handling	Each additional item	To	Service	Delivery*See Delivery notes
Free shipping	Free	United States	Standard Shipping (FedEx Ground or FedEx Home Delivery®)	Estimated between Thu, May 16 and Sat, May 18 to 43230
Free Local Pickup	Free	United States	Local Pickup

Notes - Delivery *Estimated delivery dates include seller's handling time, origin ZIP Code, destination ZIP Code and time of acceptance and will depend on shipping service selected and receipt of cleared payment. Delivery times may vary, especially during peak periods.

Handling time

Will usually ship within 1 business day of receiving cleared payment.

Taxes

Taxes may be applicable at checkout. Learn moreLearn more about paying tax on eBay purchases.

Return policy

After receiving the item, contact seller within	Refund will be given as	Return shipping
30 days	Money Back, Replacement	Seller pays for return shipping

Refer to eBay Return policyopens in a new tab or window for more details. You are covered by the eBay Money Back Guaranteeopens in a new tab or window if you receive an item that is not as described in the listing.

Payment details

Payment methods

Special financing available

Select PayPal Credit at checkout to have the option to pay over time.

Qualifying purchases could enjoy No Interest if paid in full in 6 months on purchases of $99 or more. Other offers may also be available.

Interest will be charged to your account from the purchase date if the balance is not paid in full within 6 months. Minimum monthly payments are required. Subject to credit approval. See terms- for PayPal Credit, opens in a new window or tab

The PayPal Credit account is issued by Synchrony Bank.

Audiyeah-1

99.2% positive feedback

90K items sold

Visit store Contact

Joined May 2020

Usually responds within 24 hours

Detailed seller ratings

Average for the last 12 months

Accurate description

4.9

Reasonable shipping cost

5.0

Shipping speed

5.0

Communication

5.0

Popular categories from this store

See allcategories

Electrical EnclosurePower InverterSolar EnergyChargersExtension CordMetal WorkingVoltage TransformerFlood VentCable Protector Ramp

Seller feedback (18,309)

This item (40)

All items (18,309)

t***t (263)- Feedback left by buyer.

Past 6 months

Verified purchase

Fast Shipping--Excellent Packaging--Great Price I checked the plate on my surface plate with a "half thousandth" DTI and found about 0.001 wiggle while sitting on the base and approximately 0.0015 wiggle while sitting on the top. I think that that is pretty darn good. I have a surface grinder, and anticipate flattening it very soon. I am very satisfied.

r***l (574)- Feedback left by buyer.

Past 6 months

Verified purchase

I was very impressed, after reading reviews and watching some reviews on YouTube, I was expecting something very inferior in workmanship. I was surprised, the tilting table has of higher quality and machined well. There was a little play in the cranking handle but over all I was very impressed.

d***p (20)- Feedback left by buyer.

Past year

Verified purchase

Rotation crank handle gets in the way sometimes. I used and 10mm square socket for that case. There were minor inclusions in the casting, but the product works great for my needs. It needed cleaning. All expected. Can't beat the price.

See all feedback

Product ratings and reviews

Learn more

Write a review

3.8

4 product ratings

1 users rated this 5 out of 5 stars
1 users rated this 4 out of 5 stars
2 users rated this 3 out of 5 stars
0 users rated this 2 out of 5 stars
0 users rated this 1 out of 5 stars

Good value

Would recommend

Good quality

Most relevant reviews

See all 4 reviews

by suitc43
Aug 05, 2022
OK for the price
This is about what I expected for a component in this price range. Pros: It has about ± 50° of travel. Three full length t-slots that roughly fit 7/16" T-Nuts It has a scale for setting angles to within a few degrees The worm drive is mounted in ball bearings It comes with a 14/17 open end wrench and a paint brush for chips. It is a heavy piece of equipment. Cons: Travel is restricted by the pillow block type bearings on the worm drive. They will hit on the table unless the unit is elevated when mounted. The worm drive shaft between the bearings is just a little too long and binds up the bearings Castings and machining are rough and file work is required. Two of the T slots were not wide enough to accept the T nuts. One was fine but the others needed to be widened by .015 inches and .03 ... This is about what I expected for a component in this price range. Pros: It has about ± 50° of travel. Three full length t-slots that roughly fit 7/16" T-Nuts It has a scale for setting angles to within a few degrees The worm drive is mounted in ball bearings It comes with a 14/17 open end wrench and a paint brush for chips. It is a heavy piece of equipment. Cons: Travel is restricted by the pillow block type bearings on the worm drive. They will hit on the table unless the unit is elevated when mounted. The worm drive shaft between the bearings is just a little too long and binds up the bearings Castings and machining are rough and file work is required. Two of the T slots were not wide enough to accept the T nuts. One was fine but the others needed to be widened by .015 inches and .03 inches to accept the nuts. Clamping surfaces are rough cast surfaces with paint and will require and will require facing to be true.
Verified purchase: YesCondition: NewSold by: love-happyshopping
by diehl-tees
Nov 10, 2022
It’s a project kit !
For $63.00 delivered, I won’t complain too much, I expected razor sharp edges and grinding grit and was not disappointed. What I didn’t expect was bearings that were crunchy at best and pillow blocks that are nowhere near to lining up with each other making the crank handle useless, otherwise, upon a cursory inspection with a DTI, the ground surfaces appear relatively flat and parallel to each other, also when the bolts are loosened to tilt the table there is nothing keeping it from moving left and right about a 1/16 of an inch. All in all, it’s 63 bucks worth of machined cast iron that needs some serious re-machining and retrofitting in order to be usable, Not a total loss on my part but if you can find a similar used unit made in America 40 or 50 years ago for even double the price, you ... For $63.00 delivered, I won’t complain too much, I expected razor sharp edges and grinding grit and was not disappointed. What I didn’t expect was bearings that were crunchy at best and pillow blocks that are nowhere near to lining up with each other making the crank handle useless, otherwise, upon a cursory inspection with a DTI, the ground surfaces appear relatively flat and parallel to each other, also when the bolts are loosened to tilt the table there is nothing keeping it from moving left and right about a 1/16 of an inch. All in all, it’s 63 bucks worth of machined cast iron that needs some serious re-machining and retrofitting in order to be usable, Not a total loss on my part but if you can find a similar used unit made in America 40 or 50 years ago for even double the price, you would probably be better off. or if you can machine the bugs out of this one and make it work, all the better.
Verified purchase: YesCondition: NewSold by: audiyeah-1
by to_151345
Feb 09, 2023
For the price it's OK
It's about what I expected for the price. It's not the same quality as the ones from MSC costing $440 or a similar table costing $150. Quality costs. The one I received was .008" out of parallel which can be compensated for with shims. The tilting drive was crunchy but it did move OK. It has a ton of backlash which is easy to deal with. One the table is clamped it stays clamped. I have a milling machine and surface grinder Truing the table was not a problem. A mill, even an accurate mini mill will do an adequate job. It's very easy to disassemble which I did. I polished all the sliding surfaces, removed the bearings, pried out the rubber seals and lubed them. They look to be a pretty common 27mm bearing so replacing them shouldn't be a problem if you desire. The tiling drive works ... It's about what I expected for the price. It's not the same quality as the ones from MSC costing $440 or a similar table costing $150. Quality costs. The one I received was .008" out of parallel which can be compensated for with shims. The tilting drive was crunchy but it did move OK. It has a ton of backlash which is easy to deal with. One the table is clamped it stays clamped. I have a milling machine and surface grinder Truing the table was not a problem. A mill, even an accurate mini mill will do an adequate job. It's very easy to disassemble which I did. I polished all the sliding surfaces, removed the bearings, pried out the rubber seals and lubed them. They look to be a pretty common 27mm bearing so replacing them shouldn't be a problem if you desire. The tiling drive works smoothly now. THe scale on the side is surprisingly accurate. I used a digital level to check it. All work necessary except getting the table true can be done with basic hand tools. THe backlash is the backlash. Think of it as a feature rather than a defect. Remember it was well under a hundred dollars.
Verified purchase: YesCondition: NewSold by: audiyeah-1
by lawm0855_o9ebmh9xmd
Jan 17, 2024
Good all around tool
Works great for the job
Verified purchase: YesCondition: NewSold by: audiyeah-1

Shop by category

Picture 1 of 12

Tilting Table 5 x 7inch for Milling Machines Swivel Angle Plate Adjustable Plate

Shop with confidence

Item specifics

Item description from the seller

Shipping and handling

Return policy

Payment details

Audiyeah-1

Detailed seller ratings

Average for the last 12 months

Popular categories from this store

Seller feedback (18,309)

Product ratings and reviews

Most relevant reviews

OK for the price

It’s a project kit !

For the price it's OK

Good all around tool

More to explore :