|Listed in category:

Confirm this item fits

Add your vehicle details to make sure this item fits.

Have one to sell?

Currie Enterprises CE-9114L

100% Satisfaction - Easy Returns - Fast Shipping
US $70.00
Condition:
New
4 available

Additional service available

Breathe easy. Returns accepted.
Shipping:
Free Standard Shipping. See detailsfor shipping
Located in: Flat Rock, North Carolina, United States
Delivery:
Estimated between Thu, Jun 20 and Mon, Jun 24 to 43230
Delivery time is estimated using our proprietary method which is based on the buyer's proximity to the item location, the shipping service selected, the seller's shipping history, and other factors. Delivery times may vary, especially during peak periods.
Returns:
30 days returns. Buyer pays for return shipping. See details- for more information about returns
Payments:
      
Earn up to 5x points when you use your eBay Mastercard®. Learn moreabout earning points with eBay Mastercard

Shop with confidence

eBay Money Back Guarantee
Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab
Seller assumes all responsibility for this listing.
eBay item number:156213943738

Compatibility

This part is compatible with 544 vehicle(s)
YearMakeModelTrimEngineNotes
2006JeepWrangler65th Anniversary Edition Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, 65th Anniversary Edition" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2006JeepWranglerRubicon Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Rubicon" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2006JeepWranglerSE Sport Utility 2-Door2.4L 148Cu. In. l4 GAS DOHC Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, SE" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2006JeepWranglerSE Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, SE" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2006JeepWranglerSport Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Sport" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2006JeepWranglerUnlimited Rubicon Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Unlimited Rubicon" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2006JeepWranglerUnlimited Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Unlimited" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2006JeepWranglerX Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, X" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2005JeepWranglerRubicon Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Rubicon" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2005JeepWranglerSE Sport Utility 2-Door2.4L 148Cu. In. l4 GAS DOHC Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, SE" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2005JeepWranglerSE Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, SE" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2005JeepWranglerSport Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Sport" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2005JeepWranglerUnlimited Rubicon Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Unlimited Rubicon" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2005JeepWranglerUnlimited Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Unlimited" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2005JeepWranglerX Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, X" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2004JeepWranglerRubicon Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Rubicon" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2004JeepWranglerSE Sport Utility 2-Door2.4L 148Cu. In. l4 GAS DOHC Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, SE" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2004JeepWranglerSahara Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Sahara" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2004JeepWranglerSport Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Sport" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
2004JeepWranglerUnlimited Sport Utility 2-Door4.0L 242Cu. In. l6 GAS OHV Naturally AspiratedNote:"Forged Johnny Joint rod ends feature forged steel construction, 1 1/4"-12 left hand threaded shank & come fully assembled w/our Std Johnny Joint Ints & 2.625" wide ball center w/a 9/16" Thru bolt hole. These units are Extly greasable via a zerk fitting. Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well.Details:2.5" Forged Steel Johnny Joint Rod End - 1 1/4" LH Thread3.250"es Of 1.25"-12 Left Hand Threaded Shank2.625" x .562" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2.625" Mounting Width w/9/16" Thru Bolt HoleForged Steel Body Equipped w/Zerk Fitting For Ext GreasingGold Zinc Plated FinishSold As Each"; 4WD, Unlimited" PartType:Steering Tie Rod End Mfrlabel:2 1/2 Inch Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud Quantity Required:1
Portions of the information contained in this table have been provided by cycleanything

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...
MPN
CE-9114L
Model
CE-9114L
UPC
817783005166
Brand
Currie
Type
Steering, Gear and Related Components
Manufacturer Part Number
CE-9114L

About this product

Product Identifiers

Brand
Currie
Manufacturer Part Number
CE-9114L
eBay Product ID (ePID)
251236842

Product Key Features

Type
Steering, Gear and Related Components

Additional Product Features

Notes
Description--2 1/2in Forged Johnny Joint w/1 1/4 Inch LH Threaded Stud
Sub Type
Steering Tie Rod End

Item description from the seller

Adventure Club Parts

Adventure Club Parts

97.6% positive feedback
32K items sold
Joined Nov 2014
Usually responds within 24 hours

Detailed seller ratings

Average for the last 12 months

Accurate description
4.9
Reasonable shipping cost
5.0
Shipping speed
5.0
Communication
5.0

Seller feedback (8,200)

r***b (8)- Feedback left by buyer.
Past month
Verified purchase
Part fit perfectly and was at a reasonable price. When I was told by the people installing the part I was missing clips, the seller got back to me in a very timely fashion. The clips actually were in the box, but seller still was willing to send replacement clips. A+ seller, A+ customer service, and A+ on the part itself.
n***n (30)- Feedback left by buyer.
Past 6 months
Verified purchase
Excellent seller! Product, a pricey one, arrived quickly and was exactly as described - brand new in an original sealed package. Really appreciate it.
m***z (4412)- Feedback left by buyer.
Past 6 months
Verified purchase
Box was open with no packing not securely taped or packaged. Ring gear bolts were missing which normally come with Auburn units (we have plenty to cover that ) the additive made it. My delivery guy said they had to tape it back up for us. So YES, it was a low price good deal ... but seller needs to work on securing packages better. Thank you, JD Race

Product ratings and reviews

No ratings or reviews yet
Be the first to write the review.