Other Semiconductor & PCB Manufacturing

<p>8 inch Silicon Wafer. </p><br><p>Shipped with USPS Priority Mail Flat Rate Envelope.</p><br><p>See pictures for details </p><br><br><p>Thanks</p>

A 50 angstrom Ti layer is used as an adhesion layer. Silicon wafers are p-type, 1-20 ohms/cm2, thickness is 475-525um thick, & <100> orientation.

My photos are taken in standard white room lighting and are not color enhanced. Silicon iridescence is caused by diffraction of light on the microscopic patterns of the electronic circuits on the wafer.

4" Wafer Container. Each complete set includes three parts: container, cover and spring.

Part Numbers The following MPF Feed Throughs are available Be sure to check out our selection at 1 A6912-3-SP 5.38".

1 SLM N2 MG-04 Multi Gas. Downport C Seal. 9 pin D. Tested and working in excellent condition.

GaAs (gallium arsenide) wafers. The loose wafer carrier and open wafer are not for sale. (100) N-type, Si-doped, 50.8 mm x 350 µm thick, 1 side epi polished. Dopant Si. Thickness 350 um +/- 25.

Model: 275. On a scale from 1 - 10, with 10 being in new or excellent condition, this item is rated as a 8. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.

MINICIRCUITS FK-2-2 POSITIVE POLARITY FREQUENCY DOUBLER. 10-1000 MHz. FK-2-2, Rev ORX1. FREQUENCY: 10-1000MHz. INPUT POWER 1dBM MIN, 15 dBm MAX. IMPEDENCE (OHM): 50. SHORAGE TEMPERATURE (C): -55 TO 100.

Inficon Balzers LI-9496 CDG100D. 1 Torr. DeviceNet, 15 pin, KF16 Fitting. New out of box.

Dupont Kalrez, AS-568 O-Ring. for your consideration.

This will aide in providing a more accurate quote. This fee will vary depending on the size of the item. Audio / Video. Sparks, NV 89431. 230 Coney Island Dr. Nevada Surplus. Everything Else / Other.

Up for sale is one NI 9239 module with BNC. Two available.

Manufacturer RUCKER & KOLLS. Model Number: 222. These products are subject to export restrictions under U.S. law. Do you need a lift gate truck for your drop off location?. CRT glass, except for glass with lead content less than 5 parts per million, and clean of phosphor, CRT fines, coatings and frit.

This Mass Flow Controller has been pulled from a functional environment. <p> The unit has wear from previous use including scuffs and scratches. </p> <p> Includes only the Mass Flow Controller, No accessories. </p> <p> Quantity listing with reference photo, you may not receive the actual item pictured. </p> <p> Inventory is on hand and ready to ship. Please feel free to message us any question you may have. Thank you for checking out our listing.</p> <p></p>.

This unit was removed from service in good working and physical condition with minor wear from previous use.

WHAT IS PICTURED IS WHAT YOU WILL RECEIVE. (G1VAKRAK).

<p dir="ltr">USED DS TEACHING BOX DS-S-T1 . Condition is Used.  Untested, but most likely works fine.  Just been sitting on the shelf for long enough to know im never gonna use it.  Shipping in the USA only.   Thanks for looking.</p>

Used, Work Condition.

Silicone Wafer Dipper. Made in PTFE white.

Amat 0100-09263 ASSY,LED BOARD TOGGLE SWITCH. Shipped with USPS Priority Mail.

Model Number: P8A013504C6T023. Up for Sale is a genuineMKS P8A013504C6T023 unit. Manufacturer MKS. Morgan Hill, CA 95037. 18305 Sutter Blvd. Will-Call Hours Can't find the answer you're looking for?.

Adwill D-636. UV Curable Dicing Tape.

HP Binary Interface Board. Palmindustrial is a division of The Palm Group LLC. We do our best to describe everything.

We want you to be happy and will make every effort to make you happy. Local Pick up is acceptable. FOB DETROIT.

715-330897-003-REV A. Shipped with USPS First Class Package.

This item is designed for acid etch and bake applications for processing silicon wafers.

Unit includes black carry case. The physical condition is good, but there are signs of previous use and handling. Serial numbers or country of manufacture may vary.

This is a very precision mask maker for photolithography.

Manufacturer APPLIED MATERIALS. Do you need a lift gate truck for your drop off location?. CRT glass, except for glass with lead content less than 5 parts per million, and clean of phosphor, CRT fines, coatings and frit.

Nicole Jackson. (See Hours of Operation, above). Brooks/Equipe/PRI (For AG Associates 4100, KLA UV1250, KLA UV1280, Thermawave 2600, 3290,5240 and others. ).

CROUZET PHASE:2 12.5W STEP = 7.5 deg.

Part Number: BK1200SSB.

Used board. I am not a technician so the board is sold untested. Sorry no instruction manual or other accessories.

Manufacturer APPLIED MATERIALS. CRT glass, except for glass with lead content less than 5 parts per million, and clean of phosphor, CRT fines, coatings and frit. Why Buy from Us. Model Number: 0040-35920.

We have 1 Aluminum sputtering target, 99.999%.

MATHESON ULTRA-LINE. FOR GAS CABINET MANIFOLD. LOCATION: E012- BOX 54B.

The 5305 supports all common sensor inputs (thermistor, RTD, AD590, and LM335), and has a 4-wire RTD mode to eliminate connector resistances. Simply hook up your mount, set the appropriate limits, and start the AutoTune process.

Click here to see description.