Motorcycle Parts for Cagiva

380 Sets Auto Electrical 2.8mm 2 3 4 6 Pin Wire Connector Terminal for Car Motor.

The tip is welded to the header and there are a few dents. Has also been repaired and welded. Minor hole to header pipe, easy fix. Rare parts.

MOST OF MY PARTS ARE USED UNLESS OTHERWISE NOTED . DINGS, DENTS, AND BLEMISHES ARE PAR FOR THE COURSE!

Good set of 35mm marzoccchi forks from a cagiva alazzurra- I have used these on many many period race bikes and they work very well. These are in good shape and worked fine when removed. I have these with lugs for P05 brembo calipers only.

Nice loud bub 2 into 2 system removed from a cagiva alazzurra- worked fine when removed- fits pantahs, etc.

I BOUGHT THIS IN A LARGE PARTS LOT AND I AM NOT EXACT CERTAIN ON EVERY ITEM. YOU GET EXACTLY WHAT IS PICTURED NO EXCEPTIONS. I am limited on manpower and cannot make exceptions.

I BOUGHT THIS IN A LARGE PARTS LOT AND I AM NOT EXACT CERTAIN ON EVERY ITEM. YOU GET EXACTLY WHAT IS PICTURED NO EXCEPTIONS. ALL IN GOOD USED CONDITION. PIC#2 SHOWS THE ONE PUSH ROD HAS LIGHT RUST.

THIS IS FROM A CAGIVA ELEFANT 650 MANUFACTURED 9/85. I AM NOT CERTAIN IF IT IS EXACTLY DEFINED AS A 1985 OR A 1986. ALL IN VERY GOOD CONDITION. TIGHT NO LEAKS, BOOTS ARE TORN PIC#3, MISSING ONE REFLECTOR PIC#5,ONE RUBBER CAP IS TORN PIC#7.

I AM NOT SURE EXACTLY WHAT MODEL THIS IS FROM. THE LAST 3 PICS OF THE CASES ARE FOR REFERENCE ONLY. THEY ARE NOT PART OF THIS SALE. THE SALE IF FOR EXACTLY WHAT IS IN PIC#1. HEAD IS IN GOOD USED CONDITION.

Speedo drive removed from a 7k mile cagiva alazzurra- worked fine when removed-.

THIS IS A NOS OEM FACTORY CAGIVA DUCATI REAR BRAKE CALIPER BRACKET. - FOR THAT REASON, NOT EVERYBODY WILL RECEIVE THEIR PARTS WITH THE ORIGINAL PART NUMBER LABEL. IT IS IMPOSSIBLE.

I BOUGHT THIS IN A LARGE PARTS LOT AND I AM NOT EXACT CERTAIN ON EVERY ITEM. YOU GET EXACTLY WHAT IS PICTURED NO EXCEPTIONS. ALL IN GOOD USED CONDITION. REAR BRAKE MASTER CYLINDER WORKING CONDITION IS UNKNOWN.

Complete dashboard removed from a 7k mile cagiva alazzurra- worked fine when removed-.

Not original shock off the WMX500. This shock had the lower mounts bent inward to work. Cracking to top bushing but still usable.

I AM NOT SURE EXACTLY WHAT MODEL THIS IS FROM. ALL PARTS ARE IN GOOD USED CONDITION. THE LAST 3 PICS OF THE CASES ARE FOR REFERENCE ONLY. THEY ARE NOT PART OF THIS SALE. THE SALE IF FOR EXACTLY WHAT IS IN PIC#1.

Worked fine when removed-.

I AM NOT SURE EXACTLY WHAT MODEL THIS IS FROM. THE LAST 3 PICS OF THE CASES ARE FOR REFERENCE ONLY. THEY ARE NOT PART OF THIS SALE. THE SALE IF FOR EXACTLY WHAT IS IN PIC#1. ALL PARTS ARE IN GOOD USED CONDITION.

Inventory is updated daily.

This is a complete bike being parted out. the overall condition of this bike is pretty nice and all original. WHAT YOU SEE IN THE PICTURE/S IS EXACTLY WHAT YOU GET.

THIS IS FROM A CAGIVA ELEFANT 650 MANUFACTURED 9/85. I AM NOT CERTAIN IF IT IS EXACTLY DEFINED AS A 1985 OR A 1986. GOOD USED CONDITION. FEW RUB AREAS ON THE BOTTOM EDGE OF THE SEAT PAN BUT OVERALL A VERY NICE SOLID SEAT.

I BOUGHT THIS IN A LARGE PARTS LOT AND I AM NOT EXACT CERTAIN ON EVERY ITEM. YOU GET EXACTLY WHAT IS PICTURED NO EXCEPTIONS. BORE IS VERY NICE SMOOTH. LAST PIC IS THE PISTON SIZE THAT IS CORRECT FOR THE BORE.

I AM NOT CERTAIN EXACT WHAT MODEL THIS IS FROM. ALL PARTS ARE IN GOOD USED CONDITION. THE LAST 3 PICS OF THE CASES ARE FOR REFERENCE ONLY. THEY ARE NOT PART OF THIS SALE. I am limited on manpower and cannot make exceptions.

THIS IS FROM A CAGIVA ELEFANT 650 MANUFACTURED 9/85. I AM NOT CERTAIN IF IT IS EXACTLY DEFINED AS A 1985 OR A 1986. ALL IN GOOD WORKING CONDITION. I am limited on manpower and cannot make exceptions.

Cagiva 800084499 fork seal set for Canyon 600NOS OEM.

THIS IS FROM A CAGIVA ELEFANT 650 MANUFACTURED 9/85. I AM NOT CERTAIN IF IT IS EXACTLY DEFINED AS A 1985 OR A 1986. GAS TANK IS IN VERY GOOD CONDITION. I THINK YOU WOULD BE HARD PRESSED TO FIND A NICER USED TANK.

Piston has the special teflon coating. ASSO casting number is 2889 (also looks like 2839). make Supersized seem small. Get images that. No phones to answer any more!

Super clean set of 35mm forks for cagiva alazzurra with only 13k miles on it - worked fine when removed.

1988-1990 CAGIVA WMX250. To save on freight we do adjust the freight on orders of more than one item.

I AM NOT SURE EXACTLY WHAT MODEL THIS IS FROM. THE LAST 3 PICS OF THE CASES ARE FOR REFERENCE ONLY. THEY ARE NOT PART OF THIS SALE. THE SALE IF FOR EXACTLY WHAT IS IN PIC#1. CYLINDER IS IN VERY GOOD USED CONDITION.

THIS IS FROM A CAGIVA ELEFANT 650 MANUFACTURED 9/85. I AM NOT CERTAIN IF IT IS EXACTLY DEFINED AS A 1985 OR A 1986. GOOD USED CONDITION.

Rear master cyl removed from a 7k mile cagiva alazzurra- worked fine when removed-.

Description coming soon.

They are in good condition.This part was removed from a running 1989 Husqvarna Cagiva 125. · All coils, CDI boxes, stators etc. are tested on the machine that they were removed from. If we can’t test an electrical part.

Mirrors removed from a cagiva alazzurra- worked fine when removed-.

Good dry clutch cover removed from a cagiva alazzurra- worked fine when removed- bearing is in good shape and I just dressed the o ring and bore.

THIS IS FROM A CAGIVA ELEFANT 650 MANUFACTURED 9/85. I AM NOT CERTAIN IF IT IS EXACTLY DEFINED AS A 1985 OR A 1986. GOOD USED CONDITION.