Infrared Home Security Sensors and Motion Detectors

Adopts integrated circuit, good sensitivity detector. Works by receiving human motion infrared rays. 1 x Infrared Sensor Switch. Power consumption: 0.45W (static 0.1W ). Detection motion speed: 0.6-1.5m/s.

Adopts integrated circuit, good sensitivity detector. Works by receiving human motion infrared rays. 1 x Infrared Sensor Switch. Detection motion speed: 0.6-1.5m/s. Detection angle: 180°. Working temperature: -10℃+40℃.

1byone Wireless Driveway Alert Alarm System PIR Sensor. Alert with Red light& Sound when p edes trians are approaching. when PIR triggered, it sends a wireless signal to the receiver unit, up to 328 feet(100m) away!

Driveway Patrol System uses advanced infrared wireless technology. - Driveway Patrol infrared wireless alert system. Driveway Patrol. - Alert your household for any intruders Great security. - When a person or vehicle passes the sensor, the receiver emits an audible tone.

Scope of application :LED downlight, ceiling light, projection light. -- Inner body auto sensor adopts infrared heat releasing device. Principle of induction: infrared induction. The colors deviation might differ due to different monitor settings.

TopGreener TSOS5 Indoor Motion Sensor Light Switch. 1 x TopGreener TSOS5 Motion Sensor. AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch.

Type: Pir Switch. The colors deviation might differ due to different monitor settings. the load lights will automatically turn off. Item type: Sensor Switch. Working temperature: -20 to +60 centigrade.

This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT. Output: Maximum 1000W incandescent lamp, 100W fluorescent lamp, Exhaust fan 100W, Motor 100W, Electric bell 100W.

DRIVEWAY INFRARED WIRELESS ALERT SYSTEM Features --- For home security include House, Front Door, Driveway, Garage, Garden, Mailbox, etc. --- Easy Installation --- No tools or wires needed --- Motion activated --- Detects people or vehicles --- Battery(s) operated --- Durable weather resistant based on plastic construction --- 400-foot transmission distance between transmitter and receiver ---Receiver makes a pleasant chiming sound when the sensor is crossed Specifications ---Weight: 9 oz ---Dimensions: ---Receiver 3.Five (5) 4.75 x 1" , Transmitter 2.5" x 2" x 4" ---Max Output Power: 4.

Human body infrared motion sensor, can be used in corridor, toilets, stair hall, balcony, washroom, garage, etc. 1 x Infrared Sensor Switch 2 pairs x Screw 1 x User Manual. This item is well made of premium material for durable and practical use.

Alarm Indication: Infrared LED Light. Engage RF interference: 10MHZ ~ 1GHZ 20V / M. Alarm current: ≤ 15MA. Static current: ≤ 25uA. 107 59 45 mm / 4.2 x 2.3 x 1.8 in. Installation: Wall or corner installation.

High sensitivity, easy for installing. The sensitivity for left-right direction is better than up-down direction, make sure the installation direction is left-right. Mini DC 5V - 24V Infrared Motion Sensor Switch.

Mini Closet PIR Sensor Detector Smart Switch 110V 220V LED PIR Infrared Motion Sensor Detection Automatic Sensor Light Switch. 1x Sensor switch. Output mode: sensor output. Small, lightweight, easy to install and operate, plug and play.

Sealed design to anti-rain(fog), dust(worms) and other integrated weather, the detector sensitivity will increase automatically(AGC circuit). Detector Area: indoor 20m. Outdoor 10m. Single Beam Infrared Sensor with high levels of anti-RFI / EMI capability.

It's convenient and especially, with an affordable price. What's more, 1 receiver can pair with up to 5 PIR sensors so that a large area could be secured. Here at 1byone, we stand by our products 100%25 with a 12-month warranty.

Infrared Motion Sensor Wall Switch PIR Manual On/Off White Infrared Automatic Switch. Adopts integrated circuit, good sensitivity detector. Works by receiving human motion infrared rays. Power Sourcing: AC 110V.

FEXIBLE OPERATION: 3 working modes: Auto-ON/Auto-OFF (occupancy mode), Manual-ON/Auto-OFF (vacancy mode), Manual-ON/Manual-OFF. Occupancy (OCC)/Vacancy (VCC) Mode. SENSOR SWITCH: Features with advanced passive infrared (PIR) technology to detect motions in a room, automatically turns the lights on when you enter the room and off when you leave the room, hands-free and energy-saving.

◆The detector will automatically increase the sensitivity when encountering dense fog or bad weather (AGC circuit). ◆Alarm linkage: Yes. We will try our best to reduce the risk of the custom duties. Detail Image.

DC 12V-24V 8A Automatic Infrared PIR Motion Sensor. 1 reset button & 1 general use button. Can be directly connected with Raspberry Pi. 600 pcs Quality Transistors in a case. - You can conveniently to let the light auto on/off.

Type:PIR Infrared Motion Sensor Switch. Application :LED lamp, LED downlight, ceiling light, Energy saving lamp, fluorescent lamp. Induction angle: 110 degree. Standby power consumption：Less than 0.1w.

Type: PIR Switch. 1 x PIR motion sensor switch. You can conveniently to let the light auto on/off. Output power: 12V: <96W, 24V: <192 W. Adjust the light soft and stable, no flickering. Working temperature: -20-60 ℃.

This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT, safe and practical. Output: Maximum 1000W incandescent lamp, 100W fluorescent lamp ,Exhaust fan 100W, Motor 100W, Electric bell 100W.

The detector automatically increases sensitivity when exposed to heavy fog or bad weather (AGC circuit). High-power transmitting device, photographic margin is up to 90%25, high-power infrared receiving tube, low-power processing technology, lightning protection circuit design.

TopGreener TDOS5 Motion Sensor Light Switch, Neutral Wire Required, Single Pole. 1 x TopGreener TDOS5. Sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room.

This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT, safe and practical. Output: Maximum 1000W incandescent lamp, 100W fluorescent lamp ,Exhaust fan 100W, Motor 100W, Electric bell 100W.

Type: PIR Switch. 1 x PIR motion sensor switch. Output current: 8A. You can conveniently to let the light auto on/off. Output power: 12V: <96W, 24V: <192 W. Adjust the light soft and stable, no flickering.

LED Floodlight. LED Spotlight. LED Ceiling LightDingCheng LED Katalog. LED Ceiling Light. Do not expose to direct sunlight or lighting, strong winds or near heaters or air conditioners. Note: the motion sensor switch works in the ambient light less than 20LUX (dark condition).

PIR2 is a 433.92MHz RF PIR motion sensor that for human detection. 1 x SONOFF® PIR2 Wireless Infrared Detector. Dual infrared. Alarm indicator light: on for 3 seconds. Alarm current: ≤10mA. Wireless frequency: 433.92MHz.

Scare them away! Infrared Driveway Wireless Motion Outdoor Alarm Sensor Alert Detector Security. Device Type Wireless Motion Sensor Alarm Infrared Alert. Use it to monitor any area inside or outside, It is wireless so you can place it anywhere in the house and even take it from room to room.

◆The detector will automatically increase the sensitivity when encountering dense fog or bad weather (AGC circuit). ◆High-power transmitting device, photographic margin is up to 90%25 High-power infrared receiving tube, low-power processing technology Lightning protection circuit design.

AC110V-240V Socket Infrared Motion Sensor Automatic E26 Light Lamp Holder Switch. Model:Sensor E26 Plug Socket Switch. Base Type:E26. It product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions.

This pair of infrared detector need install them at the opposite positions. There is a infrared area between these two detector parts. Cell phone Accessories. Cell Phones & Smartphones. Relay Output: 1A max 30V, constant open/close, can be set by jumper wire.

Adopts good sensitivity detector, integrated circuit. 1 x Infrared Motion Sensor Holder. ModelInfrared Motion Sensor Holder. Power Source: 110-240V/AC. Power Frequency: 50/60Hz. Ambient Light: 3-2000LUX (adjustable).

Adopts integrated circuit, good sensitivity detector. It has been through testing standards for safe using. Works by receiving human motion infrared rays. Auto Sensor. Working rotation: 180°. Switch Parts & Accessory.

The motion detector power by 4 AA batteries (not included). When the alarm is triggered,it will sound for 40 seconds. 110 degree wide angle. Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.

Transmint Frequency: 433MHz(can be customized). Alarm Output: wireless output. 1x Wireless Motion Sensor. Alarm Current: less than 15mA. Standy Current: less than 8uA. Temperature: 10℃ to 60℃ (approx 50℉ ~ 140℉).

Honeywell’s 5800PIR Series of Wireless Motion Detectors are high-performance, easy-to-install sensors featuring sleek, compact designs that are ideal for applications where aesthetics or discretion are critical.