Got one to sell?

Got one to sell?

Get it in front of 160+ million buyers.

Boat Jet Drives

A jet boat draws water under the boat and expels it through the stern. To ensure the efficient performance of your boat with minimal hull resistance from the struts, rudders, and shafts, an appropriate drive is necessary. Boat jet drives are available in brands such as American, Mercury Jet, OMC, Sierra, and Yamaha.

How do jet drives work?

A jet drive operates through a pumping unit, which is comprised of an impeller, stator, nozzle, deflector, and coupling. This drive uses an engine to power its pump. The engine can be either 2-stroke or 4-stroke model. The pump sucks up the water from beneath the hull then passes it to the impeller, which increases its pressure and then passes the water out through the nozzle. The movement of the water to the rear of the boat causes the boat to thrust forward.

What are the features of jet drives?

Jet drives power vessels such as personal watercrafts and jet boats. Powered jets have sizes ranging from 16-24 inches. The small-sized drives, which are below 20 inches in length, have one engine while the large ones have two engines. These engines have performances of up to 500 hp. The drives are comprised of the following features:

  • They have an axial pump that provides efficiency and reduces operational noise.
  • They have high-quality components made with stainless steel, providing strength while preventing cavitations and corrosion.
  • They have an inboard thrust block that ensures durability.
  • They are made of cast aluminum, hence they are strong and lightweight.
  • They have an integrated mounting system and intake that are easy to install.
  • An air silencer box and surge tank that ensures smooth and quiet operation.
What are the basic features of jet boats?

Jet boats have a model and hull design that provide a smooth ride, high efficiency, and strength. Their engines have tuners that make them powerful. To enhance movement and safety on the lakes and seas, these boats have jet intakes and reverse thrusters. They can also spin around to 180 degrees to prevent potential accidents.

What can you consider when buying jet drives?

The factors you might consider include the material which, depending on the environment you use your vessel in, will include aluminum, stainless steel, or composites. You can also consider the power; the range extends from under 100hp up to 33000hp. This will depend on the cruise speed, the shape of the hull, and propelling requirements. For high-speed boats, consider the inlet design. This design controls the amount of water that can flow through the inlet to the pumping chamber. Finally, consider the pump design, such as the single and multistage axial and mixed flow designs to match the application of your propeller. This choice will depend on whether you wish to operate on shallow or deep waters.

Tell us what you think - opens in new window or tab