Arduino Stepper Controls & Drives

1 x UNO R3 CH340G board. It is a total of four slots, can drive four A4988 stepper motor. In other words, six IO ports can be well managed three stepper motors. Very convenient to use. 4 x A4988 driver.

1 x Motor Drive Shield L293D. Can drive 4 DC motors or 2 stepper motors or 2 Servo. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping. Reset button.

For 42,57,86 Stepper within 3A 2/4 -phase / 4 wire / 6 wire stepper motor. excitation mode: synchronizing, half step, 1/8 step, 1/16 step. overheating and over-current protection circuit to ensure optimal performance.

1x GRBL CNC Shield. 3x A4988 Stepper Motor Drivers. A4988 Stepper Motor Driver . Compatible with GRBL (OpenSource firmware for Arduino UNO that converts G-code into commands for stepper motors).

ULN2003 Darlington using high-power stepper motor driver chip. ULN2003 Driver Board x1. A, B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable.

Compatible with GRBL 0.8. Open-source firmware operated on Arduino UNO, converting G code commands into stepping signals. 4pcs A4988 Driver 4 x A4988 motor driver module. CNC Expansion Shield 1 x CNC Expansion shield v3.

Rated current: 50A. Rated current: 50A. 1pcs 50A motor drive module. This drive module performs much better than MC33886 or L298 motor drive module. It can withstand high current overload. The drive module weigh 15 grams.

1pc Arduino L293D Expansion Board. This is a common DC motor driver module, and 293D chip current DC motor driver chip. Pin is made of Arduino compatible,Convenient enthusiasts quickly developed based on the Arduino.

Can drive 4 DC motors or 2 stepper motors or 2 Servo. Up to 4 bi-directional DC motors with individual 8-bit speed selection. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.

The L293D chip is also what’s known as a type of H-Bridge. Can drive 4 DC motors or 2 stepper motors or 2 Servo. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.

Clock Speed: 16MHz. Digital I/O Pins: 14 (of which 6 provide PWM output).

ULN2003 Darlington using high-power stepper motor driver chip. Arduino Compatible. A, B, C, D four-phase LED indicates the status of the stepper motor work.

Chip: L298N (ST NEW). 5 x L298N Module. Double H bridge drive. Drive current: 2A (MAX single bridge). Storage temperature: -20 to 135. Max power: 25W. Weight: 30g. We do not accept P.O. Boxes.

Drukarka 3d. 3d printer.,drv8825. stepper removibili compatibili A4988 o DRV8825 I motori passo-passo possono essere collegati con connettori molex a 4 pin o saldati in posizione. 4 x driver motore passo-passo A4988.

For two-phase within 42,57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor. Automatic half current function. Subdivision: whole step, half-step, step 1 /8, 1/16 step, a maximum of 16 Subdivisions.