Amek

NOT ENTIRE CONSOLE.

I was using this unit with a TAC Bullet B2 mixing console. As a result, I no longer need this power unit. Disassemble and clean the cooling fan and lubricate, where applicable. Replace if required.

Functional channels available from a decommissioned pro-studio. Channels have be removed and prepared by a professional audio technician.

This is an inline console with dual input and monitor paths on each module. If your looking for a great analog console then this is a fine example. Console is 7 feet long and 4 feet wide appx 600-700 lbs.

CONSOLE HS BEEN TESTED AND ALL FUNCTIONS WORKING GREAT. EXCEPT MIC #33 INPUT, LINE IN 33 WORKS FINE. WILL NEED TO BUILD A POWER CABLE FROM. I also have the wiring diagram for the cable build. 36 MIC/LINE INPUTS AND 4 STEREO LINE INPUTS 44 TOTAL INPUTS.

THIS CONSOLE HAS 4 BAD CHANNELS. THE BAD CHANNELS ARE INCLUDED IN THE SALE. THIS CONSOLE HAS BEEN SERVICED AND ALL SWITCHES AND FADERS HAVE BEEN CLEANED. THIS CONSOLE WAS MADE IN APPX 1993. THE CHANNELS ARE SEPARATE AND CAN BE SENT IN FOR REPAIR.

THIS ITEM WILL BE ONLY PICK UP, ONLY PICK UP.

(many different types of output connectors are available to match your existing console's DC cable). Front panel illuminated power switch with 4 circuiy breakers & LED indicators for input and output protection.

For mid-sized to larger Recording Consoles. Front panel illuminated power switch with 4 fuse holders & LED indicators for input and output protection. Recording Engineer, Producer, Musician, Mathematician".

Is one or more power rails acting up or is dead?. Are you hearing audible hum or strange noises in ALL of your console channels?. INCLUDES A FULL REBUILD, SERVICE, RE-CAP & TESTING WITH UPGRADED COMPONENTS INSTALLED.

PULLED WORKING FROM A THEATER. Sorry no way to test them, but pulled from working theater. but sold as is.

(Is one or more power rails acting up or is dead?. Are you hearing audible hum or strange noises in ALL of your console channels?. 350 Series looks similar). Most of the TAC 250 & 350 series Power Supplies that we repair have never been serviced.

(Is one or more power rails acting up or is dead?. Are you hearing audible hum or strange noises in ALL of your console channels?. 350 Series looks similar). Most of the TAC 250 & 350 series Power Supplies that we repair have never been serviced.

DC power outlet connectors are also available. Console Audio Performance. UPGRADE YOUR CONSOLE'S AUDIO PERFORMANCE! 17.5 Volts, 18 Volts, 22 Volts or 24 Volts for the Audio Power Rails. Front panel illuminated power switch with 4 fuse holders & LED indicators for input and output protection.

They are in great condition, Look at the pictures.

Complete 1 binder set. Also includes full details & schematics for the automation & virtual dynamics systems. Extensive sets of 11" X 17" fold-out schematics of all circuit boards, components, interconnections, power systems, automation systems and virtual dynamics systems, are included.

A BASIC CLEANING HAS BEEN DONE BUT MAY REQUIRE. TESTED AND IN WORKING CONDITION. EACH UNIT WAS TESTED AND.

GRS Pro Audio's founders have been installing, maintaining. 17.5 Volts, 18 Volts, 19 Volts, 21 Volts, 22 Volts or 24 Volts for the Audio Power Rails. Audio Power Rails can be factory adjusted to provide 15 Volts, 16 Volts, 17 Volts.

For mid-sized to larger Recording Consoles. Front panel illuminated power switch with 4 fuse holders & LED indicators for input and output protection. out through the ventilated cabinet top & side panels.

For mid-sized to larger Recording Consoles. GRS Pro Audio's founders have been installing, maintaining. Front panel illuminated power switch with 4 fuse holders & LED indicators for input and output protection.

These are NOT reproduced by GRS Pro Audio Systems. Extensive sets of 11" X 17" fold-out schematics of every circuit board, components, interconnections, power systems & automation systems, are included.

You are responsible to make sure this shaft will work. WITH THE 20MM SHAFT. This item is the shaft only.

This is for the schematics only.

Our highly efficient (very low power consumption) BLUE DOG Power Supplies give a super quiet MIX buss, SO quiet you will wonder if the console is actually switched ON ! (Provided your studio installation is up to specification).

Allen heath. Heres a list of the many consoles we have built BLUE DOGS for so far .

Allen heath. Our highly efficient (very low power consumption) BLUE DOG Power Supplies give a super quiet MIX buss, SO quiet you will wonder if the console is actually switched ON ! (Provided your studio installation is up to specification).

With Great Sadness i'm saying good by to my lovely Scorpion Board. the Parts Pulled out from a working console but due their age will be sold as-is.

THIS SALE IS FOR 1 MASTER CHANNEL 501C 1 OSC/COMM 501D MODULES. (1 MAIN OUTS 501C). TESTED TO BE IN WORKING ORDER BUT SOLD AS-IS.

PICTURES SHOWN ARE OF 1 MODULE ONLY. YOU WILL NOT GET THE ACTUAL MODULE SHOWN IN THE PICTURE. THE ITEM IS SOLD AS-IS. BECAUSE OF AGE IT IS NOT SOLD AS A WORKING PART. IT MAY OR MAY NOT WORK. THE MODULE IS FULLY INTACT WITH ALL PARTS AND MAY OR MAY NOT NEED REPAIR AND IS SOLD AS SUCH.

1 501b module needs repair.

UNABLE TO TEST AND VERIFY ALL FUNCTIONS. IT WORKED WHEN I PUT INTO STORAGE. BUT BECAUSE I COULD NOT TEST IT THIS ITEM WILL BE SOLD AS PARTS OR NOT WORKING.

Great sounding board. First 8 channels were recapped. The master module will need to be recapped as it does not work currently.

Is one or more power rails acting up or is dead?. Are you hearing audible hum or strange noises in ALL of your console channels?. Most of the TAC 750/850 series Power Supplies that we repair have never been serviced.

Why would anyone go to the trouble of asking about such a minute detail?. For mid-sized to larger Recording Consoles. 17.5 Volts, 18 Volts, 22 Volts, 24 Volts or 24.5 Volts DC for the Audio Power Rails.

Various DC power outlet connectors are available. Console Audio Performance. UPGRADE YOUR CONSOLE'S AUDIO PERFORMANCE! 17.5 Volts, 18 Volts, 22 Volts or 24 Volts for the Audio Power Rails. Front panel illuminated power switch with 4 fuse holders & LED indicators for input and output protection.