Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in String Lights, Fairy Lights
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on String Lights, Fairy Lights
Not only high quality components but they were very well assembled. Nice long leads, includes 'spares' kit as well. Four sizes of extra nozzles, wire wrap, etc. but no mounting brackets/hardware if you're adapting it to some printers. Adapters or templates on Thingiverse provide plenty of options though. If you're having extrusion problems this could be a great solution as it also features a very powerful, upgraded drive motor.
Verified purchase: Yes | Condition: New
These extruders are great, however for a DIY project you'd better figure out how you're going to mount it. The so called mounting bracket is too thick, and not well thought out. It looks like it was designed to be used between stepper and aluminum, but you'd need a special longer screw. These folks suggest using it on fan side, but again the screw is too short. None of it makes much sense. In the end, I made my own mounting bracket out of thin steel and mounted it on the fan side. Who ever designed this should have put a couple of tapped holes in the aluminum. Otherwise works great.
Verified purchase: Yes | Condition: New
I am still building the printer this head looks good but screws that hold fan on are to short to attach bracket as per instructions. I like the nozzle options it will probably be March before I can actually run the head.
Verified purchase: Yes | Condition: New
The unit is much more rigid than I thought it would be. The bracket for mounting was free, but like another person said, you will need longer screws to mount it how it was meant to be mounted. Which was the least of my worries. All in all, it took 30 minutes to mount it up on an open build machine. If you're doing an open build, then finding longer screws won't be a problem for you I'm sure. I would reccomend this item because The price and the quality can't be matched when paired together.
Verified purchase: Yes | Condition: New
I bought a cheap $160 dollar Prusa I3 DIY 3d printer and it wouldn't print for longer than 2 hours at best and would get clogged. After 5 days I got only 3 goodish prints. Set to print over night and it would stop printing halfway through a 4 hour print very disappointed made no sense. Tried 400 different combinations of heat vs speed and I found some to be better than others but still messed up on long runs. So if u buy one of these kits you need one of these. I had to modify my bracket and drill some new holes and hard wire it to my wires cause this part isn't meant for my printer but with the ability to adjust the tension and he better over all design of this product it worked great so far. Thanks a bunch...
Verified purchase: Yes | Condition: New