Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Air Grease & Sealant Guns
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Air Grease & Sealant Guns
Works well, and provides lots of pressure to push grease past small passages that my old tube style grease gun would not. I would rate it 5 stars if it came with bleeding instructions. I had no issues setting it up, but if someone has no experience with grease guns, they might struggle to get it blead. To set it up, I filled the canister manually, and found a screwdriver that fit in the slot on the bottom. I pushed up on the disc inside the canister while pumping the plunger until all the air came out. You will waste some grease while it bleeds, so hold it over a garbage can. My old style grease gun threaded on to a plastic tube of grease. I struggled to get the air out, and it finally broke the top of the tube while I tightened it for the mteenth time!
Verified purchase: Yes | Condition: New
Looked ok, but after loading with a quality grease, the plunger plate on the inside continually gets stuck and the plunger does nothing. A screw driver in the hole in the bottom and a huge WACK will free it but only for a couple of squirts, then gotta do it again..
Verified purchase: Yes | Condition: New
This tool is perfect for doing the servicing of your air powered tools requiring grease lubrication of the control gears. There are a lot of more expensive models available, however, this tool is exactly what is needed, at a fair price!! This grease servicing tool was designed especially for the ease of greasing your tools, primarily those air tools that we tend to abuse. This grease applicator also can service other tools you might need to take care of in your shops, like those expensive hand ratchets you use for 3/8",1/2" , 3/4" or 1" drive sockets. Great for the impact wrench too. Beats the heck out of the little flimsy (traveling toothpaste sized) mini pumps sized units
Verified purchase: Yes | Condition: New
I got this because I wanted something to grease the bearings on my lawn mower deck. I take them out and remove one side seal and this grease gun is the ideal gun to force the grease into the bearing. I am able to get more grease into where it's needed. I replace the side seal and re-assemble the spindle and it's good to go for a couple more years. This grease gun in ideal for this. The only drawback is there is no constant pressure at the back end of the tube to keep the grease pressed forward. But, I had no problem with it by following the seller's directions to periodically using something, (I used a short piece of dowel rod), to push the disk forward and compress the grease forward into the channel to the grease gun plunger. I highly recommend this grease gun.
Verified purchase: Yes | Condition: New
Great value for a very useful tool. Stores all your grease and allows for easier and cleaner application. There is some leakage around the pump but it's not a big deal. Feel like a pro with a new tool!
Verified purchase: Yes | Condition: New