Overall, quite pleased with the tool. The multiple attachment points and multiple tips work very nicely. The deburring tip works fantastic. The VLD chamfering tip works, but I feel that it takes off a little to much material, too quickly with very light pressure. The primer pocket cleaner works ok. Does not clean up the side walls, only parts of the bottom of the primer pocket. Since the bottom of the primer pocket is not completely flat, the pocket cleaner does not get all of it. I did not use the reamer tips since all of my brass was not previously crimped. It is big enough to hold all the tips. You can use it as 1 tool and just flips sides or 2 separate tools. Good value for the money since you get 6 tools in 1 for the price of most chamfering/deburing tools alone. My only recommendation would be to also include a standard chamfering tip or only offer it with a standard chamfering tip.Read full review
Verified purchase: Yes | Condition: New
When your automatic or quick tool fails you this will do the job without fail. I wouldn't use it 100% of the time because it will wear you out. But it will do the job when all else fails - it is my "go to" tool for trimming and cleaning primer pockets in small production numbers or when my quick tool fails me. It is well made of machined aluminum with a knurled body that splits in half so other tool heads can be easily stored inside. It also fits the hand well.
Verified purchase: Yes | Condition: New
Layman case prep tool is well built, will last many years, Well design unit, it on the heavy side, Has all three tools to prep you cases, the primer prep tool work great on primer holes Clean the pocket real fasts, the case deburring tools work quick, inside & out, overall it a great tool to have in reloading Box, this tool replace the tool l had 25 years ago, another items l like it stores all the attachments inside the units, A Big Plus / everything there you need you won't lose the attachment tools, ☆ Layman product is a 5 star product ☆
Verified purchase: Yes | Condition: New
I was working on a car valve guides. I had to trim off in and out of top end of valve guide where I air hammered. So, I had to make the top end of hole smooth. Trimming in and out was easy and quick. The middle portion of this is thick enough so I can grab easily. I satisfied 100% for this item. I would recommend this to my friends.
Verified purchase: Yes | Condition: New
Nicely made tool. Anodized aluminum which splits in half and has storage for the extra bits in the middle. Cutters all very sharp for good burr free cuts. The smaller bits have enough shoulder on them that you can chuck them in a drill motor without damaging the threads, if so desired. Sizing and chamfering crimped primer pockets are a breeze with this tool. I highly recommend this tool.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Presses & Accessories
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Presses & Accessories