The item you selected is unavailable, but we found something similar.

Picture 1 of 1

Stock photo

Integy Motor Heatsink/Twin Fan, Blue: Slash 4x4

4.4591 product ratings

OmniModels (683651)

Price:

$12.99

+ US $2.99 shipping

Estimated delivery Thu, May 9 - Sat, May 11

Returns:

30 days returns. Seller pays for return shipping.

Condition:

New

Overview Heat is the enemy, especially when it comes to electric motors. Keep your temperatures in check and your motor running efficient and cool with our Motor Heatsink with Twin Cooling Fan. The motor heatsink clips right onto your 540 or 550-sized motor, and features an anodized coating and multiple heatsink fins for added cooling surface area. The cooling fan is powered through a standard 2-pin Rx plug. The Motor Heatsink is available in blue, silver, gunmetal, purple, and red anodizing. NOTE: The power source connected to the included cooling fan should NOT exceed 6VDC. for higher voltage applications, we have optional cooling fans available.

About this product

Product Identifiers

Brand
Integy
GTIN
0917890080275, 0885539226103
UPC
0917890080275, 0885539226103
eBay Product ID (ePID)
691270559

Product Key Features

Compatible Brand
For Integy, For Model Motoring, For Traxxas
Color
Blue
Age Level
17 Years & Up, 12-16 Years
Compatible Fuel Type
Electric
Compatible Vehicle Type
Short Course Truck
Type
Motor
Model
Slash 4x4
Compatible Scale
1:10

Dimensions

Weight
0.32 ounces
Length
1

All listings for this product

item 1 Integy Motor Heatsink/Twin Fan Blue Slash 4X4 INTT8534BL Electric Car/Truck
$12.99
+$2.99 shipping
item 2 Integy Alum Billet Motor Heatsink w/ Twin Cooling Fan for Traxxas 1/10 Slash 4X4
$17.99
Almost goneFree shipping
item 3 Team Integy Slash 4x4 Motor Heatsink w/Twin Fan (Blue) [INTT8534BL]
$16.25
+$2.99 shipping
item 4 NEW Integy Motor Heatsink + Twin Cooling Fan for Traxxas 1/10 Slash T8534bl
$22.86
Free shipping
item 5 Integy INTT8534BL Motor Heatsink/Twin Fan Blue Slash 4X4
$16.99
item 6 Integy Motor Heatsink + Twin Cooling Fan for Traxxas 1/10 Slash 4X4 T8534BLUE
$12.99
item 7 INTT8534BL Integy Motor Heatsink/Twin Fan, Blue: Slash 4X4
$14.99

See all 7

4.5

4.5 out of 5 stars based on 91 product ratings

91 product ratings

69 users rated this 5 out of 5 stars
10 users rated this 4 out of 5 stars
2 users rated this 3 out of 5 stars
4 users rated this 2 out of 5 stars
6 users rated this 1 out of 5 stars

Would recommend

Durable

Entertaining

Most relevant reviews

See all 59 reviews

5 out of 5 stars
by drtal0nMay 09, 2016
Top favorable review
Works great!
I just want to get one thing straight, I believe the people who are having issues with the fans not working are running into voltage and amperage supply issues. Most people I read about are piggybacking both of these fans into their RC receiver, not cool. The BEC in most ESC's are not designed to handle extra current of these fans along with the basic necessary equipment needed to drive the RC. I used a multimeter with the negative lead off the fans running through it to measure amperage and these little things suck some juice when they are wide open, around 1 amp! The steering servo I measured while under high load was using around 1 amp, and my ESC cooling fan was using around 0.4 amps. Remember, these things run at 5V, you need more available amperage to get to maintain the rated performance these fans can deliver. So, add all these numbers up and you are pushing the poor little onboard BEC internal to the ESC to its almost limit. This is with a freshly charged 11.1V 3s lipo! With a lower voltage battery like an 8.4V nimh, I just lowered the input voltage to the ESC's internal BEC almost 3 volts. If we look at ohm's law, in order to maintain performance when voltage decreases amperage must increase. Under a wide open throttle snap using the nimh battery, the 2 fans would quit running, and I had to blow on them to start back up. I rarely use the nimh battery, so I created a solution to the problem in order to run these fans. I bought an aftermarket traxxas battery parallel split connector, one that would allow me to run 2 batteries. Instead of running 2 batteries, I cut the end of the connector off that would lead to the other battery and soldered in and heatshrinked an aftermarket dedicated 3 amp BEC just to run these fans. This way, the BEC internal to my ESC can run it's cooling fan as well as my steering servo and receiver with no issues of overcurrent. So now when I connect my 3s to my car, the motor cooling fans start up and run all the time, run fast and strong and have all the current they could ever want from the dedicated BEC. I also removed all the screws from the fans and put red loctite around the threads and reinstalled. I USED to be worried about motor overtemp issues, NOT any more. I coupled this cooling fan/heatsink assembly with the Traxxas specific heatsink-only clip on. The second fan on this unit hangs over the other Traxxas clip on and cools that one as well. Top it all off by putting some really good Arctic Silver thermal paste between these things and the motor, and I decreased my bashing 15-20 minute run temps by almost 80 degrees F, I couldn't believe it. I don't worry about my motor temps anymore at all! So, anyone put off by hearing that these fans quit working, just give these fans what they want in terms of constant BEC amperage and voltage and they will work with no issues. Not only will this method give your cooling fan system a bulletproof power supply, but you will be much nicer to your ESC! Those are expensive! I could buy 6 of these fans, BEC's and parallel connectors before I reached what I would spend on an ESC, if it burnt out due to internal BEC overload. I suppose they are not for the individual who just wants to plug and play. Take some time and figure out a good way to set it up, there is always a better way.Read full review
Verified purchase: Yes | Condition: New
3 out of 5 stars
by protourfordJun 20, 2017
Top critical review
Product switched
Ordered this Integy branded dual fan heat sink. I was shipped the Power Hobby version, disappointed in the switch but the product works very well. Keeps the motor very cool. After a 20 min hard run with modded slash the motor was cool enough to hold on to with bare hands. Stays on during crashes too.
Verified purchase: Yes | Condition: New
5 out of 5 stars
by katanafreekMay 03, 2017
Easy Easy Easy
I am brand new to RC, Put one on my JBL & one on my Vkar . Not specifically meant for these cars I know, but they are a dimensionally perfect fit . It must be the easiest possible way to keep my two motors cooler for almost no money. Cooler = Longevity . Simply PLUG & PLAY into the open pins on the multi channel receiver. If a newb like me can do it, anyone can !!! Only con : slightly on the loud side, can not hear them over the motor in motion, but if you like a silent car at stand still ??? I personally like the noise, I think it gives both of my cars more presence.
Verified purchase: Yes | Condition: New
5 out of 5 stars
by rudyvillatoroDec 17, 2016
Nice product
Nice product and easy to install. It is just a bolt on top of your motor and a little customization in order to have it working. If you are not capable or do not want to do a little customization buy a Y expander in order to install it directly to the esc unit. I run esc fan and motor fan that is why I need to customize in order to work like a charm. The 3 fans (2 in the motor and 1 in the esc) have a high current of air to the inside the car that you can feel it really strong. Totally piece of mind about heat issues here.
Verified purchase: Yes | Condition: New
4 out of 5 stars
by chucknullApr 09, 2018
Use thread lock but good unit
Good product but thread lock all the screws before running. My buddy who got one also lost half his screws in a few runs. I only lost one. Some thread lock has solved the problem. I am running a Losi truck
Product Reviews Images
Verified purchase: Yes | Condition: New

Best Selling in Cars, Trucks & Motorcycles

See all

Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Cars, Trucks & Motorcycles

Traxxas Driveshaft Assembly Heavy Duty (TRX6852A)
4.7 out of 5 stars based on 25 product ratings
$3.99 New
---- Used
Tamiya 56502 Trop2 Semi Trailer Light Set
4.9 out of 5 stars based on 64 product ratings
$47.20 New
---- Used
Traxxas 5378X Pivot Ball Caps and Dust Boots
4.8 out of 5 stars based on 60 product ratings
$8.25 New
$5.99 Used
Traxxas 1844 Large Servo Saver
4.7 out of 5 stars based on 75 product ratings
$4.00 New
---- Used
ARRMA AR390178 1/8 Scale Clip Retainers
4.9 out of 5 stars based on 45 product ratings
$6.98 New
---- Used
Traxxas 5632 Rear Chassis Brace - Blue
5.0 out of 5 stars based on 129 product ratings
$10.00 New
---- Used

Save on Cars, Trucks & Motorcycles

Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Cars, Trucks & Motorcycles

Team Losi Racing Wing Spacer 10mm 8X 8XE TLR240015 Gas Car/Truck Replacement
$5.99
Trending at $11.29
Aluminum Bearing Steering Bellcrank 1/7 Arrma 6S Fireteam Red
$20.69
Trending at $29.69
Traxxas Pivot Ball Caps & Dust Boots 5378X
$6.75
Trending at $8.55
ARRMA Kraton V5 BLX - TIRES & Wheels ( DBoots Copperhead 2 ARA8608v5) FX3225
$47.99
Trending at $49.95
Tamiya Extra Thin Cement 40ml Quick Set TAM87182
$5.50
Trending at $8.40
Traxxas Super-Duty Long Glow Plug (2.5 & 3.3) TRA3232X
$9.95
Trending at $14.00

Picture 1 of 1

Integy Motor Heatsink/Twin Fan, Blue: Slash 4x4

About this product

Product Identifiers

Product Key Features

Dimensions

All listings for this product

Ratings and Reviews

Most relevant reviews

Works great!

Product switched

Easy Easy Easy

Nice product

Use thread lock but good unit

Best Selling in Cars, Trucks & Motorcycles

Save on Cars, Trucks & Motorcycles

You may also like