Received bearing kit in record time. After reviewing a you tube video on how to replace the Frigidaire Dryer Bearing it was a snap to perform the job. My only complaint of the kit was the 2 screws that hold the plate that puts pressure on the single ball bearing. Both screws stripped with normal pressure. Thankfully I kept and reused the screws that were removed from the original plate. Beyond that everything went well. No more squeaks and the drum rotated smoothly. I'm sure a service call would have cost over 100 $$ compared to the less that $9 we spent. Good quality (except the 2 screws), very fast shipping and a great seller. Thank you.
Verified purchase: Yes | Condition: New
The screws were not exactly the same as the ones they replaced, and could not be screwed in. So, I had to reuse the old screws. Also, the ball bearing retaining spring did not fit correctly, again I had to reuse the old part. But, the main components worked fine. Thus, with a little creativity it worked, but I was generally unhappy that this was necessary. Great price, but so so quality.
Verified purchase: Yes | Condition: New
Took about two hours. Hardest part is taking the drier off since it is a stacking unit. Second hardest part is the self tapping screws in the male ball part of the bearing. put them in the plate first to form the threads and take them out then install. You can get more force on the screwdriver and prevent stripping the head. Everything you need in the kit and it is exact fit...
Verified purchase: Yes | Condition: New
Pretty straight-forward and easy to install. Mine was in a Frigidaire stacked unit. The hardest parts were attaching the small ball bearing and bracket to the rear of the machine and getting the bearing into the holder. You'll need a 2nd set of hands to hold the plastic bearing holder in place while you screw the bracket on from the rear. Though you could try taping it in place until it's secured. Getting the bearing lined up and into the holder can be trying. It's behind the drum, so you can't see it while you're holding the drum and trying to line it up. Plus there's not much room to play with. Other than that it's relatively simple. Since installation 3 months ago it's been working great and no more squealing!
Verified purchase: Yes | Condition: New
Factory part. Lots of YouTube videos to show you how to install it. This new upgraded part has machine threads and machine threaded screws. See picture and compare all screws and new machine threaded screws. Excellent part. Comes with everything needed.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Washer & Dryer Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Washer & Dryer Parts