Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Other Pumps
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Other Pumps
I bought this to fill my High Pressure SCBA (self-contained breathing apparatus) tanks for use in my air rifles. The tanks are rated for 4,500 psi, and this compressor does the job. Be sure to check out the several videos on how to use it... it's VERY important that you supply adequate cooling water, and also that you don't exceed 4.500 psi (you'll blow out the safety disk if you do). It comes with a HP hose with Quick Disconnect fitting. However, the hose uses a 10mm thread on the compressor side, not the 1/8" British Straight Pipe (BSPP) thread used on most HPA connectos. Also, the water trap/filter is a little small, and consists only of a fiber type filter cartridge approx. 1 x 3 inches. Moisture is the enemy on airgun and paintball gun reservoirs... you want the air nice and dry. I recommend you get a larger "Diablo" type filter and use desiccant with that filter. Also, using a 5 gallon pail of water can be cumbersome, so you may want to come up with something better. I'm thinking of using one of the cooler packs you get from the hospital when you have joint surgery, and putting frozen 16 oz bottles of water in it along with regular water to keep things chilled. All in all, though, a good piece of equipment at a good price.Read full review
Verified purchase: Yes | Condition: New
Just got it after handpump filling my Pcp air rifle it's amazing how fast it is no mor fill for a half-hour so for happy I hope it holds up
Verified purchase: Yes | Condition: New
This is an amazing little pump it get that job done!!
Verified purchase: Yes | Condition: New
Verified purchase: Yes | Condition: New