About
All feedback (269)
- patriot_sales.jones_outdoor_services (29773)- Feedback left by buyer.Past 6 monthsVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- *****- Feedback left by buyer.Past yearVerified purchaseA Nice Person ! AAAAA Buyer !
- topmotorforevers (3196)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- lone-star-auto-part (54714)- Feedback left by buyer.Past yearVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- *****- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- rolltidehard (2155)- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
Reviews (6)

Sep 06, 2017
Exactly what I needed!
This B&S OEM replacement air filter/pre-filter was what I needed however I had to trim the long sides of the pre-filter to get to fit properly. Otherwise it dose exactly what it is intended to do- filter the intake air.

Jul 12, 2016
Universal In-Line 5/16" Metal Fuel Petcock Works Great!
This "Universal In-Line 5/16" Metal Fuel Petcock Works Great" on my restored 1991Ducati 900SS project bike when I installed an upgraded FCR 41MM Carb Kit. I use it to shut off the main fuel line (lactic pump keeps it pressurized when ignition is on) and closing the petcock installed in the line will allow recirculation of fuel being pumped to the carbs back into the tank! I set it up this way so I can drain or burn off excess fuel in the carbs for storing the bike and/or depressurizing the main fuel line to the carbs during short-term downtime. This petcock has been in use now for several months without any leaks or stuck lever and rates a A+ in my book (highly recommend it and will likely buy another for another project).
Feb 16, 2011
Great hard drive for vintage Apple ATA/IDE hardware
This IBM Deskstar 120GB HD is a great hard drive for vintage Apple ATA/IDE hardware like the G3 and G4 PowerMacs, iMacs and other Desktops. I put one in a friend's Original G3 "Bondi Blue" 233 MHz iMac with a fully upgraded OS to v10.3.9. Running 120GB (115GB actual after formatting and install) with 8MB Cache/Buffer and spinning at 7200 RPMs it made a significant performance improvement over the Apple OEM 4GB 5400 RPM "old grinder" running OS 9 (iMacs firmware was updated too before install). It is relatively quiet for an older drive and once installed into the iMac it is barley noticed and for a G3 running OS X the Original iMac actually boots up without any significant lag time compared to the OEM drive running OS 9. Since the Original iMac does not have a FireWire port and only USB1 I decided to temporarily install the Deskstar in my G4 PowerMac Dual 1.42GHz and boot from the 10.3 Install DVD to get a faster and cleaner install. This also gave me the access and ability to quickly download and install all of the necessary Apple OS X and Security, etc updates directly onto the hard drive taking it to 10.3.9 (max OS for the Original iMac). Thanks! MacBulldog