Circuit board was packaged on nothing but a padded envelope and not even in an anti-static bag. Board arrived damaged, two mounting hole/corner was broken do to the poor packaging. The damage was only on the ground pads, it still functions but it not being in a anti-static bag and in and only an envelope was unacceptable
w***o (289)- Feedback left by buyer.
Past 6 months
Verified purchase
This probe had to be physically modified to work with my Mestek CM86B clamp meter. After contacting a Fluke technician it was determined that when this probe is used with a Mestek CM86B Clamp meter the readings of the meter have to be multiplied by 10 to get the correct measurement. If a Fluke clamp meter was used this multiplication factor would be adjusted automatically in the Fluke Clamp meter. This probe accurately measures current being drawn by the test loads that were used.