Purchased to fit folding knife screws... where the knives can cost in excess of $1000. If you want a Torx bit screwdriver, where the bits are high quality and actually fit Torx heads snuggly, unlike the usual undersize, fastener destroying, crap you usually end up with... get this driver set, or any other Wiha Torx tools. You will be glad you did.
Verified purchase: Yes | Condition: New
The bits are of g...ood quality as they are made in Germany. But the handle --- the part specifically that holds the bits, the bits fit poorly into the tip and the magnetic is very weak. Once you load a bit into the tool, the bits wobble side to side or rotate slightly, turning what should be an experience with a precision tool into something less. The handles claims to be made in the USA, but I have had China-made micro bit drivers that had better fit and finish that were made of plastic. Wiha, what are you thinking with this?
Verified purchase: Yes | Condition: New
I bought this tool to work on a few ...pocket knives that have Torx screws. It works very well for this. If you need a Torx screw driver for frequent/heavy use. I would recommend getting a heavier duty tool. The small bits store in the handle with a screw on cap. Make SURE that cap is on TIGHT when you are done with the tool. Do NOT leave a bit in the tool when you aren't using it: It's only held in place with a magnet. If you drop the tool. or it rolls off your bench, the TINY tip will likely come out of the tool. The bits are very small. Don't let them fall on the floor. They are easily lost. The bits are made in Germany. so they are high quality. The tool body is made in China, so not that great. A decent tool for occasional use. The bits store inside the aluminum body of the tool, which is nice. Don't leave loose bits out on your work space. Keep them in the tool, except the ONE you are using. They a tiny and easily lost.
Verified purchase: Yes | Condition: New
This is an excellent primary Torx tool or a...s a BACK-UP Tool Kit for those that need Torx tools. It also comes in handy when 2 tools are required to remove a Torx screw. Yes there are situations where 2 tools are necessary. One tool set can contain a range of bits while the Torx Micro Bit Handle Storage Pocket Clip with 7 pieces can work in conjunction with the other.
Verified purchase: Yes | Condition: New
Lightweight precision screwdriver made of high quality materia...ls, about what you'd expect fit and finish wise for the actual screwdriver considering the price, the bits are what makes this product shine.
Verified purchase: Yes | Condition: New
