 |
Small and lightweight the All In One Card Reader easily fits into your pocket, laptop case or camera bag. It takes the following memory cards; Micro SD, MMC micro, Mini SD, SD, XD picture card, MMC mobile, MMC plus, M2 and MS Duo. The card reader comes with a USB A 2.0 to Mini USB connecting cord. I plugged it into my computer and it was ready to go. There is an "access" light in the upper right corner that glows red to let you know that it is connected. Data transfer was fast and accurate, completing most file transfers in milliseconds. The slots for the cards and the connecting cord are tight, once you put the card in, it stays put while you do your work.
Verified purchase: Yes | Condition: New
The item so far seems to work great. The first use (at least on my Windows 8.1) goes through a set up (driver) install for approx. 20-30 seconds but after that it is quick upon future use. The normal SD slot on my computer would randomly not recognize the SD card especially if it was not ejected properly. This adapter works much better and if the card is removed (without software eject) it is not a problem. You can reinsert the card and it pops right back up on the screen. The minor "con" I have about it is the ports are not labelled so it took some guesswork to get the right slot (SD card top left). I labeled with red marker but not easy to see....
Verified purchase: Yes | Condition: New
I purchased this to use with the CF cards for my Canon 5D classic. CF cards need to be aligned correctly at the beginning of being inserted into slots because they will not be connected to the pins at the correct location if they are not, leading to bent pins and ruining your cards. So nicer readers will have guides on the sides of the slots. This product lacks them, and there is no other way than to just feel and wiggle to get your card inserted into the slot correctly. One night after painstakingly aligning my card like usual, when I thought I had the alignment right, I pushed my card in all the way, and it felt weird immediately - alas, I had misaligned it! The misalignment caused a few pins to bend, but the real problem was that now my card wouldn't work. I ended up ordering a pair of used CF cards from Adorama, and a new reader. The new reader has the guides, and it now takes no effort to insert the CF card into the slot. If you are considering this reader for your CF cards, you may want to take account what happened to me.Read full review
Verified purchase: Yes | Condition: New
Works great for the XD and SD cards. The only bad thing that's probably my problem is that I try to put the cards in backwards but that's fine because it is keyed and won't let you insert it anyway.
Verified purchase: Yes | Condition: New
I would not recommend this reader to anyone. To date, I have only been able to read a Micro SD, and it is not marked for the side to insert the cards, and what cards go into what slots. Once I was told which slot and how to insert the Micro SD, it was very difficult to insert. I asked for a chart to show which way to insert what card in each slot, and got no reply. I guess I was lucky to get instructions for the Micro SD. You can't even read the symbols on the top of the reader, although, I don't think that would have been any help anyway.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Memory Card Readers & Adapters
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Memory Card Readers & Adapters
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
