This worked very well in my 2005 Silverado. So much so, that I went ahead and replaced all of the stepper motors while I had the dash out of the vehicle. It's not a trivial installation so I suggest you watch the many U-Tube videos on it. Be sure to mark with tape the location of the dials BEFORE you take them off the spindle (I didn't and it took about 3 shots to get the dials correct). It's a MUST DO. Good value and good product.
Verified purchase: Yes | Condition: New
The stepper motors worked great, and were easy enough to install. The little solder solder worked great too. The LEDs require quite a bit of modification to work. The soldering iron started smoking and just about burst into flames when I plugged it in. Luckily I caught it, unplugged it and threw it in the trash.
Verified purchase: Yes | Condition: New
The product is of decent quality. The kit should have 1 more stepper motor and 1 or 2 lights for a GM truck. The toughest part is synchronizing them. If there is a procedure they suggest instructions would be appreciated I'm sure.
Verified purchase: Yes | Condition: New
Product is exactly as described. This is not the first dash I have repaired and not likely to be the last. I will buy this again. IF you are confident at automotive repair and have good soldering skills, this is a great product. Otherwise you might want to pay a professional to do it.
Verified purchase: Yes | Condition: New
Good product, soldering iron is at little more then needed so be careful when soldering on board. 40 watt suggested as highest rec’d 50 watt. I have several irons so I used one that’s adjustable. If you have never soldered have someone else do the soldering. also if you have a problem with messaging part send cluster to a pro and have them rebuild your cluster.
Verified purchase: Yes | Condition: New
Watched u tube on replacing the stepper motors and 3 of mine didn't work, don't know if I over heated them. I had to send my cluster off for repair, so it's not as easy as they make out. If you are not very experienced in soldering small parts don't try this yourself save money and time send your unit off for repair.
Verified purchase: Yes | Condition: New
I bought a new truck and was told right iff that bad I’d need a new speedometer and the price of them are outrageous someone recommended me getting this and it’s amazing how easy it is to fix this! Plus the kit comes with everything you need?
Verified purchase: Yes | Condition: New
Good value, good quality, my only concern is that the wattage on the soldering iron is a bit high at 60watts. Thirtyish may be more appropriate.I had more than enough material to successfully repair my panel. My 28 watt iron provided ample heat with less potential for component or board damage.
Verified purchase: Yes | Condition: New
I repaired a 2004 montana with this kit and it work excellent. If you know how to solder and desolder electronic components this is an easy fix. The dash disassembly is very straight forward. The whole cluster comes out and can repaired on the kitchen table. In my case the dash containedb3 bad ones but i replace all of them (4). You tube has videos if instruction needed
Verified purchase: Yes | Condition: New
I changed out my stepper motors on my trailblazer and it amazes me how much people charge yet how easy it was this kit is well worth the money it even came will all tools and solder needed to complete the job highly recommend
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Instrument Clusters
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Instrument Clusters