Items came in new condition in a sealed plastic bag. I used two of the items from the kit, the idler pulley and the belt. I discovered that the bell shaped piece was broken at the front of the motor. i replaced that piece as well. The installation was easy with help from my son. The repair made my wife happy and the dryer should run for well for awhile. The fix was inexpensive compared to hiring a repairmen or purchasing a new one. This can a one person job but having a partner speeds up the repair;
Verified purchase: Yes | Condition: New
This dryer maintenance kit is a fantastic deal, but the little silver disc clips did not fit my model so I had to reuse the original one. Also, even though the wheels are self lubricating, they squeak terribly, especially at first. It is lessening over time so I think eventually the squeak will disappear. That said, I would buy the set again.
Verified purchase: Yes | Condition: New
Perfect fit for my coin-op commercial dryer. After many years of use, the old belt shredded and took the idler arm pulley with it. So it was best to install all new wheels and pulleys. When I did, I also found that the spindles for the wheels had turned color to the blue steel look of overheating/friction. So it was also good to have those parts and replace them. I also wanted to be sure about alignment, so that the drum was not off-center, to prevent early mis-alignment with the belt, which would cause an early failure in the future. So I was happy to buy the kit, and not just the belt. It was about an hour to make the repair. The old dryer is up-n-running, and is very quiet. Be sure you get the right kit with the right belt, as they may differ in size, even if the idler arm and wheel 'look' correct.Read full review
Verified purchase: Yes | Condition: New
took maybe 45 minutes to swap everything. highly recommend going ahead & doing all 3 while you're at it. easy to get to and swap the wheels. I spent more time trying to 'cinch up the belt' than anything. watch a few youtube videos and you'll get it..its just one of those things you have to do flying blind a bit and getting your hand into the ONE place where you can pull the pulley back & thread it correctly took a little time. I don't care how many videos you watch, you have to get your hand in there yourself and try it out before you're going to get it right.
Verified purchase: Yes | Condition: New
This kit has the actual OEM parts originally used on the dryer. Everything fit very well and made the dryer as good as new. Don't waste your money on the knock-off brands. By the real deal and do it once and do it right.
Verified purchase: Yes | Condition: New
This is the first time I ever tried to repair my dryer and it could not have been easier. The enclosed instructions helped but the Youtube videos go into much better detail. I changed the gas valve coils, belt, rollers, and installed a new tension pulley. Total time to dismantle, repair, and reassemble was under one hour.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Washer & Dryer Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Washer & Dryer Parts