I would not put such a critical part in an engine without taking it apart and checking all clearances, Internal the Pump was on the tight side of spec's , the pressure relief valve was IMO too tight , I was able to hone it a bit with a wheel cylinder hone for a perfectly smooth fit , additional I shimmed the spring a bit for a little more pressure, the machined surfaces of the housing and cover had very sharp edges that had to be de-bured , like I said , I would never install a critical part like this without thoroughly checking it out , I've never bought a pump that was ready to use out of the box, but this one was pretty good.
Verified purchase: Yes | Condition: New
Don't buy this pump!!! ,I had to drop the pan and remove it after installing it to grind clearance on the pump housing because the crank counter balance was rubbing the pump housing this was 8 hr. Wasted !!!!
Verified purchase: Yes | Condition: New
no need to change to high volume. lifters will go stiff and open valves
Verified purchase: Yes | Condition: New
Works great , very good deal
Verified purchase: Yes | Condition: New
HAS NOT BEEN USED YET
Verified purchase: Yes | Condition: New
Verified purchase: Yes | Condition: New
Not a high volume oil pump. Standard volume m-72
Verified purchase: Yes | Condition: New
Good oil pressure.
Verified purchase: Yes | Condition: New
Ok
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Oil Pumps & Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Oil Pumps & Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
