Part worked perfectly for my RX350 08’. Just make sure you buy the right tools. Have a swivel head ratchet with a reverse torx socket set . You’ll need the E-8 size socket with the 1/4” drive and extension. Then you will need the swivel head drive 1/4 for the 12 mm bolt tight space. It’s the only way . Use a regular size 12mm socket on the end of the swivel. No deep socket will fit in the tight space . Use the 12mm deep socket for the other bolts. Then switch to the regular size 12mm socket for the tight space on the left side, with 6” in extension . It make this job a breeze.
Verified purchase: Yes | Condition: New
Fit. For a job that is less than pleasurable, the right fit without the weld build up of the off brands, is well worth the extra $$. I got OE gaskets as well.
Verified purchase: Yes | Condition: New
Part worked just fine! No more oli leak. Yay
Verified purchase: Yes | Condition: New
The dorman part from the local auto store that I tried first had a bad weld and leaked. This one is brazed instead of welded and works great. Shame on toyota for originally shipping with defective rubber hoses, though.
Verified purchase: Yes | Condition: New
Correct specifications. Installation is easy with correst tools.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Engine Oil Coolers & Lines
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Engine Oil Coolers & Lines