I give this product good marks. This product is a reproduction of the OEM part. The poor design of this product is all on Dodge engineers. If you lose yours, like happened to me, take time to do a little proactive engineering on your new one. Take a couple of 1/4" body washer and drill it out to go over the end of the rod ends. After installing the new rod, slide the modified 1/4" body washers ( one on each end) over the ends of the rod and secure with an "E" clip that will retain the washer on the rod shaft. This will prevent the rod shaft from being able to get torque loaded and jump out.
Verified purchase: Yes | Condition: New
Easy to install seems to be good quality for the price wish there was some type of clip to hold it on the backside of the rubber grommet would purchase again if necessary
Verified purchase: Yes | Condition: New
It works but it could be designed better the OEM fell off because the rubber bushings dry out and crack so when you put this on use a couple of zip ties so you dont loose it when it falls out too. It should be made with longer shanks on each end with a small hole to allow for a washer and a cotter pin so that it cant fall out because if it falls off before you get stuck in that mud hole miles from anywhere with no phone service it would just be nice to just put it in 4 wheel drive so you dont have to crawl under the truck in that mud hole to try to put it in 4 wheel drive
Verified purchase: Yes | Condition: New
A unit that probably gets very overlooked until needed. Ram should’ve designed a better retainer instead of only a rubber grommet. But works.
Verified purchase: Yes | Condition: New
The Transfer Case Shifter Control linkage and Grommet was a perfect fit and of very good quality. (easy to install)
Verified purchase: Yes | Condition: New
I have a vehicle that's listed and this thing ended up being about 4-5 inches too short. I filed for a return BUT, turns out I had an extra one at home that just needed the grommets and the ones in this set fit fine, so I am giving it 2 stars JUST because the grommets fit and those alone are more than this.
Verified purchase: Yes | Condition: New
Fit great just as good as OEM if not better. Well definitely buy again.
Verified purchase: Yes | Condition: New
Arrived quick and correct. Looking jst like oem and fit perfect. Quality made not cheap and flimsey. Shifts as it should. Hint: keep a extra set of rubber bushings in your glove box!!!
Verified purchase: Yes | Condition: New
This looks like a good replacement For the Dodge Transfer case to shifter Linkage, the one that always falls off,, Worked like a charm!👍😎,,,
Verified purchase: Yes | Condition: New
It is what I ordered and it fixed the problem, it came with new bushings and that was part of the problem with losing the old one.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Shifters, Cables & Linkages
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Shifters, Cables & Linkages