Had to remove fan from heatsink, heatsink was thicker than original part. Screws were too large to fit existing mounting screws. remounted new fan on old heatsink. works great
Verified purchase: Yes | Condition: New
I needed a rear blowing CPU cooler for my HP Deskpro 600 G2. I wasn't too happy with the traditional CPU cooler with the fan on top blowing downward. Took a change on this, assuming that it would fit in the SFF desktop case, and it does...especially with the screws that bolts into the case. This CPU cooler does, indeed, fit, and now act's also as a rear exhaust blower that blows hot air to the rear of the case. It is still so quiet that I had to double check that the fan was actually spinning. Shipped with the pre-applied thermal paste, so this is NOS from the factory. NICE.
Verified purchase: Yes | Condition: New
I used only the fan and had to exchange screws with the old ones for it to fit. I did not want to have to remove the heat sink. This worked well especially considering it was a different part number from the one it replaced.
Verified purchase: Yes | Condition: New
I purchased three fans. They were the right type and in great shape. Very easy to install as well.
Verified purchase: Yes | Condition: Pre-owned
The heatsink fan assembly was easy to install. There are registration pins on the fan shroud but gently turning the shroud back and forth allows it to slip into place. The product was exactly as described and it works well.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in CPU Fans & Heat Sinks
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on CPU Fans & Heat Sinks
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
