1000pcs 50 Values 50V Ceramic Capacitor Assorted kit Assortment Set Hot Sale
CURRENTLY SOLD OUT
 | Shop by category |
{"delay":300}
|
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Capacitors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Capacitors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
Very impressed. Well organized in small lock bags with clear neat labels which made it easy to organize in a multi compartment plastic see through case.
Verified purchase: Yes | Condition: New
In a nutshell, these are ok for the hobbyist or non-critical work but in any case, you will definitely want to check the values before soldering them in place. Some of these capacitors were 50% off of the marked values. I finally got around to using these capacitors today. I was selecting capacitors for a filter network in a 250mw QRP transmitter when I noticed erratic results when changing the final capacitor value from 330 pf to 560 pf. The capacitors arrived in marked bags, as advertised. The leads are a little bit dainty, but useable. I checked the bags of 330 pf and 470 pf. The 330 pf were good, most within 5%. The 470 pf were mostly within 10% and a few were +/- 20%. I checked the bag of 100 pf and almost all were 60 to 70 pf, one was 52 pf and none were over 80 pf. I didn't have time to check more. I did double check the ones that were way off with a second tester and that confirmed things. Fortunately, I don't mind checking components before soldering. It's something that I have learned to live with when buying parts from east Asia. I'm glad I bought these but they might not be for someone who needs parts that are properly marked and tested.Read full review
Verified purchase: Yes | Condition: New
This is a lot of caps for a very low price. Sadly that's the best I can say about them. As others have stated many of these caps are wildly off their supposed value, sometimes by as much as an order of magnitude! Without at least a basic capacitance tester this kit is effectively useless wherever the value is remotely important! The only application I can think of would be as bypass capacitors on a breadboard, in which case you wouldn't need a whole 50 values to begin with. And if you weren't on a breadboard you may as well take the SMD plunge and spend the same amount on quality SMD caps. Luckily for me I have a cheap capacitance tester, and I've noticed something interesting. I believe this kit is composed of surplus caps for what values they can get this week, and manufacturer rejects for the rest, and that is how they make a profit on these. Some of the bags are composed almost entirely of caps that are within -10%/+20% tolerance. Other bags however have values that are all over the map. Of course all the caps in a bag are identically marked so there's no way to tell the good ones apart without individually testing them. Fortunately I haven't found any that are short... yet. Don't think of these as having poor quality control, think of them as being REJECTED by quality control!Read full review
Verified purchase: Yes | Condition: New
The package is just what I wanted. Price & delivery were fine. The problem is that the 100uf capacitor is really ONLY 50uf.....so I had to use TWO (in parallel) to get 100uf. I had the 100uf in a circuit and the circuit wouldn't work....after "hours of trouble shooting" I finally checked the capacity of the 100uf with a meter....to find out that it was only 50uf. So now I have to worry about the value of all 1000 pieces...!
Verified purchase: Yes | Condition: New
A very good selection of capacitors to have on hand for doing repairs to small electronics. In my case I used them for repairing guitar amplifiers, mixers and PA systems. Very handy selection and a good price.
Verified purchase: Yes | Condition: New
