Decent build quality easy to fit. Tilt adjustment requires some force to fix in place, not sure if this would hold a heavier monitor without dipping. I would have liked it to be a few cm taller on the desk as the brackets fit a higher than expected on the monitor, but i believe you can get an extension rod.
Verified purchase: Yes | Condition: Pre-owned
The bolt that locks in the height of the mount was stuck at a certain point and could not be tightened anymore. The weight of the monitors drags the whole thing down. I applied a lot of force to that thing with no success. Had to ghetto rig it to keep the monitors at the desired height. I did that by tightly wrapping a ton of electrical tape around the main post. Since that, it's been great. But that's a pretty important issue considering the purpose of a monitor stand.
Verified purchase: Yes | Condition: Pre-owned
So i knew what i was paying for. Thankfully ots made out of actual metal, good construction of parts, and holds my two 23 inch monitors fine. You might have trouble with really heavy monitors staying up, but its not a hard thing to fix. In my situation though, i didnt use the uncluded parts for cable management. Funny enough i realised this is the same conpany that made my pc case too.
Verified purchase: Yes | Condition: Pre-owned
Wasnt to sure about this mount but i have the same brand single monitor mount and is built real well so i decided to give this a shot and wow its built like a tank i have a 24" and a 27" on this mount and no big issues other than a bit of adjustment ... BEFORE you mount the arm on the pole loosen the alen head bolts just slightly to make it move easier or you will have a issue with the pole TURNING when you move the monitors and the pin that is suppose to hold the pole from turning is small and not long enough to lock it in very well and i ended up bending it so straightened it out and loosened up the arms and its PERFECT ..' This will take two 27" monitors with NO issues i think both my monitors combined add up to about 17lbs.. I DO RECOMMEND THIS TO EVERYONE
Verified purchase: Yes | Condition: New
I have 5 of these and they are well made and functional. This was the only "used" one I purchased (all others were purchased new). I wish I had bought all of mine used as it is in like new condition with all hardware and tools included and almost half price of a new one. Maybe I got an exceptional one, but mine was in purrrfect condition.
Verified purchase: Yes | Condition: Pre-owned
I'm 90% satisfied with the Dual LCD Monitor Desk Mount. I wish there was more up and down adjustment on the individual arms as I was not quite able to make my unmatched 21" monitors parallel. (both Acer 21" monitors) There is only about 1/2" of adjustment with adjustment nut. Otherwise I'm very happy, my monitors are able to be moved closer to my view, and I've reclaimed a significant amount of space on my desk.
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Monitor Mounts & Stands
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Monitor Mounts & Stands