Installed in my 05 Escalade and dropped trans temp 60 degrees!! Trans temp was running 200 degrees with oem cooler now I have to push it to for temp gauge to rise to 140!!! Bought it so I can pull my 6,000 lb boat with no worries!! Great cooler! The only thing I did to modify the hardware sent with the cooler is I drilled out the hose barbed fittings with a 1/4 inch drill bit in a drill press cause they looked like they would have been lots of restriction with fluid traveling through them! Very clean install!! Buy with no doubt in your mind that this cooler will preform as advertised!
Verified purchase: Yes | Condition: New
The cooler came as it was described with all the hardware for a factory connection. However, it would be nice to be able to have the option of ordering the correct AN fittings at time of order. If you plan on changing out your factory transmission lines along with the cooler you will need aftermarket AN fittings to go along with the new transmission lines that have AN fittings installed on them. Those brass fittings that come with the cooler will not fit the AN fittings. I gave the cooler 3 stars for this reason. Would have given 5 stars if the cooler had the option to order the AN fittings.
Verified purchase: Yes | Condition: New
Well constructed and easy to install. Used 3/8 steel tubing with flare nuts (5/8 thread) sourced from local auto parts store. Installed with ports oriented up to ensure complete fluid fill to maximize efficient heat transfer. Excellent quality and lifetime warranty. Mine was made in Canada.
Verified purchase: Yes | Condition: New
I have yet to verify trans temps reduction under heavy loads, I suspect from its design and larger surface area that it will function as others be reported. Do know that it does not have a burp tube in it, (instructions did not call that out looked inside to verify myself), so be sure to mount it inverted, (fittings pointing up), so that it will fill completely otherwise it won’t and is no more effective than the teeny factory unit. Plenty of videos online showing how why this is.
Verified purchase: Yes | Condition: New
If you live in high temperature areas, if you value your expensive transmission, you should get one of these tranny coolers. Great build, value, and product. I have not installed it yet, and I will come back and add my experience. I have used many tranny coolers previously, so this is not a new subject to me, but I will come back and give my review. Jay
Verified purchase: Yes | Condition: New
This trans cooler will fix your problems. My 97 Diesel came from its previous owner with an overheating trans and a plugged cooler. I purchased this cooler with low temp bypass and was more than pleased. More recently and based on that experience, I purchased this cooler for an RV that had trans temp issues. Once again, I swatted a fly with a sledgehammer. This cooler will keep your rig cool whether you are tugging a 18000 GVW motor home or a gnarly diesel with its programmer set to kill. Install is straightforward and I really like the look behind the grill. The stacked plate design does an excellent job of modulating temperature based on oil viscosity. I do recommend the low temp bypass if operating the vehicle before reaching operating temperature. This cooler is more costly than most others but it is definitely worth it.Read full review
Verified purchase: Yes | Condition: New
Installed this on 2011 GMC Sierra, trans was running almost 200 degrees just bare truck. Drove through Colorado mountains last week pulling 10’ enclosed with a 4 wheeler and never went above 157 degreeS! Awesome cooler, decently easy install. Used Dorman 800-605 line connectors in order to use the existing factory hard lines and worked great.
Verified purchase: Yes | Condition: New
I purchased this product to install in a 2500hd silverado. Install went easy, they give you plenty hardware to help with the installation. The transmission is running so much colder it id great cant wait to see how it is when i have my camper hooked to it. I would buy this product again.
Verified purchase: Yes | Condition: New
Put one in my 02 silverado in preparation for the 3000 stall converter. Haven't put the converter in yet, but I'm running 50 degrees cooler on the highway! That's with doing away with the factory aux tranny cooler and using only the in-radiator and the 40k! Install was suuuuuper easy, using only what came in the kit. Took an hour. I'd put one of these on a stock, non-towing vehicle just because. They're great.
Verified purchase: Yes | Condition: New
I have it on my 2007 Silverado z-71 My temps were at 190°F on a 4L60E 232,000 miles so I put this on and immediately dropped to 135°F in city and 155°F on highway my MPG also went up in guessing since I did a tranny flush aswell .. everything is going smooth I love this product and recomend to any one!!!! Is you have a 07-13 Silverado or GMC it's a must that you purchase a trans cooler connector if you use original tranny lines
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Automatic Transmission Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Automatic Transmission Parts