You will receive exactly what you see at pictures OEM New General International Table Saw Parts All parts is inspected and tested May shows minor scratches and signs happened during disassembly Saw Front Slide Rail Assembly Parts pulled from 10” General International Portable Table Saw TS4003. 15A, 120V 60Hz commercial/contractor, portable benchtop table saw See pictures for details
1) Every nut and bolt was loose. Had to go over entire unit before use.
2) Blade was not square with the table.
3) Rear table adjuster was broken.
4) Right side miter slot is too tight to use.
5) Front measuring for fence and sliding table is off at least 1/4".
6) Blade wrenches are worthless and bend easily.
7) Says dado up to 1/2" but had to modify plate for 3/8".
8) Motor powerful enough to make straight cuts but has bogs down with the dado set at 3/4" deep.
9) No operator manual , instructions. Had to get them online.
Only thing right was the price. If I had to do it over again , I would probably choose another brand.....
Cheaply made. Each side of the extention table only secured by one plastic screw..If you turn it to far the nut falls off. Very difficult to reattach. When the blade is fully extended ,there is play in the blade.
I bought this for my husband for his Birthday. He has been wanting one for years. He LOVED it. It is well built and very affordable. I am glad I found this,