|Состояние товара:||Новый||Состояние товара:||Новый|
|Manufacturer Part Number:||49229||Торговая марка:||Por-15|
|UPC:||Does not apply|
Доступно 49 ед. товара. Введите число, меньшее или равное 49.
Выберите действительное название страны.
Введите действительный почтовый индекс.
Введите 5 ─ 9 цифр почтового индекса.
Время на обработку внутреннего заказа
Отправка обычно происходит в течение 1 раб. дн. после получения обработанного платежа.
При оформлении покупки могут взиматься налоги. Подробнее
Good For Old Tanks
I used the silver urethane rather than the black so that future tank crud from jugs or fuel pumps can be seen. The cleaning can take a while on badly rusted and varnished tanks - this tank took a week. Follow the instructions about getting all water out or the urethane will not stick. Don't leave a thick layer on the bottom - it can delaminate later. This is a very good product if you want to stop worrying about tank rust getting into your carb. This kit was my seventh done on old Honda tanks and the first was done in 2009. That tank and all others since then are still rust free and the liner is firmly stuck to the inside of all tanks - not even a hint of delamination. Rick
Проверенная покупка: Да | Состояние товара: новые | Продавец: autobodynow
Rust Remover Not as Fast-Acting as Directions Indicate
I followed all the directions and left the rust remover (step 2) in for the maximum amount of time (2 hours, I think). Unfortunately, when I drained the tank I disposed of the product before looking in the tank.... It had only removed the lightest rust deposits - less than 1/2 of the total rust. I should have kept the product and put it back in the tank. I ended up using toilet bowl cleaner twice over a period of more than a week. The rust came out in thin sheets and flakes. I used another rust remover product for the final cleaning but got out very little more rust. In talking to my independent motorcycle mechanic he said it often takes a day or more for the POR rust remover to work on a badly rusted tank. It was my mistake for discarding it too soon. The application of the step 3 coating was more straight forward. It dries hard as nails and would be nearly impossible to remove if the application went wrong. The finished product looks great!
Проверенная покупка: Да | Состояние товара: новые | Продавец: thepartsplaceinc
This was about my 50th POR-15 Cycle/ATV kit and I hope to see about 50 more in my lifetime. POR-15 ROCKS!
Use this product correctly and the tank will outlive you. Great way to line float bowl and eliminate that cracked overflow tube issue. For those really tough rusted and or gummed up tanks, consider tossing in a couple of dog choker collars for the first phase of the operation. Not meant for use wear exposure to the sun may occur.
Проверенная покупка: Да | Состояние товара: новые | Продавец: autobodytoolmart
Directions Directions Directions
The first thing I do is read the directions. In the box. # 1 - 1 QT Marine clean - I received Cleaner Degreaser # 2 - 1 QT Medal ready - I received Medal prep # 3 - 8 oz Fuel tank sealer - I received 8 oz Fuel tank sealer Send the correct directions with the purchase of the product.
Проверенная покупка: Да | Состояние товара: новые | Продавец: restomotive
ROCK and ROLL !!!
Un Freakin' Believable !!!!! WOWOW!! Turned a bad Tank NEW!!! Seals great!! Follow instructions and I used a leaf Blower to dry the tank after the acid wash. My Tank had holes and Bad RUST now it's perfect THANKS!!!!!!
Проверенная покупка: Да | Состояние товара: новые | Продавец: sellsim_2day_sh...