shimano 600 hub

Rear Hub FH 6401 137 x 126 mm.

A very good looking original Q-R skewer included. About as good as it gets in a Shimano high-performance front hub.

Shimano 600 32 Hole Front/Rear Hub Set FH-6402 HB-6400 8 Speed. Condition is Used. Shipped with USPS Priority Mail.

The bearings are smooth spinning.

Shimano 600 hub set HB-6207 with a Shimano 600 6-speed freewheel 13-21. Even with limited action, a few minor dings and oxidization has occurred that is common with parts of this age. The entire set is in excellent condition & the freewheel spins perfectly.

<p>You are viewing a used and in excellent condition Shimano 600 Ultegra Tricolor 32 Hole Front/Rear Hub Set FH-6402 HB-6400 8 Speed. The bearings are smooth and without play. The hubs have marks from previous spokes but these do not affect function. See pictures. Feel free to ask questions and don’t forget to check out my other listings.</p>

There were laced to a set of rims, but never ridden. Includes original quick releases in as-new condition.

Its has a few nicks from being around.

Up for sale are the pictured hubs from Shimano. These were one small step down from the top of the Shimano line-up in the 1980s. As you might expect, these are quality hubs. Shimano HB-6207 Hubs. Front Hub Spacing: 100 mm.

Offered in this auction is a rare NOS NIB set of Shimano 600 EX Uniglide hubs. NOS 80's Hubs from a time warp - old stock from a bike shop closed 30 years ago. Part of a large lot of NOS parts I will be listing in the near future. Hubs are in excellent condition, new never laced and has been stored in the orig box. Hubs are Small flange drilled with 36 holes with 124.5mm spacing. For use with 5/6 speed Uniglide cassettes.

<p>Vintage Shimano 600 32h front hub and skewer</p><br><p>Nice condition with little wear on few spoke holes</p><br><p>Has been in a box for 10+ years and bearings are still smooth!</p>

Hub has been sitting in my parts bin for almost a decade and appears very dirty and greasy from storage, but would polish easily. Bearings feel nice.

This is a good quality, early 80's freehub that is becoming increasingly difficult to source. As a result, it's been our experience that the best way to acquire a Shimano 5-speed UniGlide cassette is to source an equivalent 6-speed cassette and then drop one of the splined sprockets and spacers before mounting the unit.

Shimano Part No: FH-6402. (see photos). 32 Hole Design.

Greetings, you are viewing a pair of Shimano hubs. Bearings spin freely and smooth, but after all these years could possibly be in need of new lubrication. We appreciate open and honest communication.

Rims are RIGIDA and are straight with no dings. RIGIDA ULTEGRA WHEELSET. Hubs quick release. A SMOKIN DEAL!

32H / 6401 / 126 mm Spacing. SHIMANO 600 ULTEGRA Hub Set. Ultegra 600 Skewers. 7 Speed Cassette 13-24. Cassette is in good condtion. Skewers have light wear. Check pics for condition.

Model: 600 HB-6400. Location: 2E-01139. Weight: 138 grams.

New Never Built, Perfect. Made in Japan. About Mike Fraysse Sports: Since 1994, Fraysse has operated Mike Fraysse Sports, LLC., a cycling- and triathlon-specific training center located in the foothills of New York's Catskill Mountains just 2 hours from New York City and 3 hours from Philadelphia.

Silver/Grey Shimano 600 skewers for 8-speed cassette rear hub with 130mm axle.

Ultegra Skewer. ULTEGRA 600 FRONT HUB. 32H /100 mm Spacing. Check pics for condition.

Nice Vintage Shimano 600 Tri-Color partial 6400 gruppo, 2x7, includes 170 mm crankset  w/39-53 chainrings, 68x113 mm bottom bracket, 28 hole front hub and 32 hole 7 speed cassette rear hub both with skewers, rear derailleur and front and rear brake calipers.

HB-6400 with 100mm Quick Release Spacing. Hub is rim brake type. Quick release axle types but does not include skewer. Bearings are smooth.

This is a mid 80's freehub that is a high-end model from this era (with only Dura-Ace considered better quality) and is finished in a polished silver. Detailed specifications include the following.