bowl gouge

Our Standard Series tools are made from High Speed Steel to our specifications in one of the world's largest turning tool factories and have been heat treated to give excellent performance under the rigorous demands of woodturning.

Size; 8 3/8” Steel 12” Hardwood Handle. ¼” Bowl Gouge. Solid Hardwood Handle. The handle was done very nicely in the Sorby style with a heavy ferrule. High Speed Steel is tight in the handle. High Speed Steel.

HSS Bowl Gouge 3/8". High Speed Steel.

Condition is New. Triple Tempered M2 with 12mm shank. Tool is unhandled.

Marking on handle is faint but reads "Woodcraft, HSS British Made". Looks to have seen little use having original factory grind. Included is original plastic sleeve. A near new professional tool.

Hurricane M2 Cryo tools are made from Sheffield M2 High Speed Steel which have been cryogenically treated to improve wear resistance by 3X while still maintaining the superior sharpness properties of M2 steel.Features.

Our Standard Series tools are made from High Speed Steel to our specifications in one of the world's largest turning tool factories and have been heat treated to give excellent performance under the rigorous demands of woodturning.

HSS Bowl Gouge 5/8". High Speed Steel.

26" overall length with handle. Popular top of the line gouge among bowl turners. In very good condition as shown. txzj pxzj2835 txzj67.

Robert Sorby 1/2" Fingernail Bowl Gouge. The increased cutting edge of the pronounced fingernail grind allows for "pull" cuts. The greater cutting tip area can be used for heavy profiling cuts and fine, delicate, shearing cuts.

This is a lightly used item. I put it into storage a few weeks after I got it, where it has been for the last 23 years. Here is an excerpt from the Sorby catalog. Bowl Gouge HSS ¼" Long Handled No Yes ¼" 6mm 14" 23".

Many turners prefer to turn their tool handles to their own specifications. These High Speed Steel (HSS) unhandled blades are identical to the ones found on the handled versions. The blade listed here will also fit the Sorby Sovereign System Handles.

This is a Henry Taylor Bowl Gouge. It is a 1/2" Kryo Bowl Gouge. It has never been used.

Condition is New. Wide open U shaped flute. Great for bottom Gouge. 12" long overall.

<p>The "master tool" for bowl turners. Use it to produce either massive profiling cuts or delicate finishing cuts. Standard tip grind. 17" handle with an overall length of approx. 26-1/2". Ash handle. England</p>

HIGH CARBON STEEL of the spoon carving gouge and ergonomic handle allows you woodcarving with the bowl gouge with hand fatigue. Both beginners and professionals know that in spoon carving much depends on the carving gouges.

Our Standard Series tools are made from High Speed Steel to our specifications in one of the world's largest turning tool factories and have been heat treated to give excellent performance under the rigorous demands of woodturning.

HSS Bowl Gouge 1/2". High Speed Steel.

CROWN #242 BOWL GOUGE - 1/2"". Used for primary shaping and finish cuts. Blade of this 1/2"" version is made from M2 High Speed Steel (HSS) and hardened to Rockwell 62-64, thus giving it excellent edge holding ability.

These tools are a must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary. Made from high speed steal and then properly hardened and tempered.

Tool has smooth hardwood handlewith lacquer finish, 22-1/2" long, with a brass ferrule to prevent handle from splitting under pressure. The blade is made of M2 high speed steel (HSS) to retain sharpness.

To further increase strength the blades are certified heat-treated to 68HRC. The blade is made of M42 High Speed Steel and has been honed to a razor edge for clean cuts. The swooped fingernail grind ensures the smoothest of cuts, and a secondary relief edge reduces catching.

Hurricane M2 Cryo tools are made from Sheffield M2 High Speed Steel which have been cryogenically treated to improve wear resistance by 3X while still maintaining the superior sharpness properties of M2 steel.Features.

Longer edge holding and smoother chip ejection from the polished parabolic flute. Robust Turner's Edge - 1/2" Bowl Gouge. Robust Turner's Edge 1/2" Bowl GougeFeatures This zone is up to. 002″ deep. After machining, the tools are heat treated to 64 Rockwell C.