Vintage Computer Parts & Accessories

For sale are full parts kits for Glitch Works XT-IDE rev 4 controllers, including PC board. Fully assembled and tested controllers are also available. These include the IBM 5150 PC, IBM 5160 PC/XT, and many compatible clones.

I made a run of boards for myself. here are the extras for sale. you can find out more about these boards by searching for Zeta SBC.

As the name implies, this was designed for XT computers (8088, 8086, and 80186). It has a Boot ROM that allows the computer to identify and boot from any supported and properly formatted hard drive.

We have quantity, so the one you receive might not be the exact one pictured.

Working 16K RAM expander. Silver label variety. Box and instructions are included.

This is a Focus FK-5001 keyboard with white Alps switches. It is in clean condition. I've tested it with a converter and it works fine (this board has a 5-pin DIN connector and will need an adapter to connect to modern computers).

Hard to find parts for the classic Commodore SX-64 portable computer. Two of the blue handle caps that cover the screws that attach the carry handle to the computer. One of the blue caps has a chip missing, see photo of them on edge.

16 Bit ISA Card. with IDE Hard Drive Cable. Promise Technology Chip Set. NEW Promise Technology Adapter. INCLUDES CABLE AND MANUAL. at the time NEW LS120 drives.

Tested Before Pulled.

Macintosh SE External Case Plastic Only. Auctiva's FREE Counter.

New

68882 FPU running at 40MHz. 68030 CPU running at 40MHz. 16Mb RAM (16mb simm can be replaced with a 32mb simm).

For sale are new made Glitch Works XT-IDE rev 4 boards (part number GW-XTIDE-4). You can find the source files for the board layout, schematics, jumper setting diagrams, and a complete Bill of Materials on the GitHub page.

This is a set of 4 GAL chips to replace the original PAL chips in Amiga 3000 desktops and towers (all motherboard revision). 4 lATMEL ATF16V8B-15 chips flashed with the correct code for the Amiga 3000.

Small model, spacesaver. Comes with coiled cable. F4 Model M.

Made in Japan. Sealed box/never opened. SEE PHOTOS OF ACTUAL ITEM!

Been too long to remember if it would load or not, no way to test now. Just the cassette, no original box or manual. May not even be the original software still recorded. Factory labeled "Home Helpers: SmartLETTERS and Forms".

Compatible with earlyMacintosh 128K, 512K, 512Ke, Mac Plus, Apple IIc. 9-Pin connector. Equivalent to the M0100 mouse, but with uniform color and slightly rounded corners. We'll get back to you as soon as possible.

Apple II,II PLUS,IIe 3.5 Unidisk Interface Card (LIRON) ASCO 505 WORKS/LOOKS NEW. Will not come in original box but will be shipped in antistatic bag. Because of vintage age no returns or warranties but item works great. Thanks!

Two sockets for Kickstart 1.2 - 3.1 ROMs - uses standard Amiga Kickstart ROM chips. Two 40 pin Kickstart sockets and a 40 pin header - a ribbon cable connects the header with the motherboard Kickstart socket.

Replacement key cap only for the Amiga 1000. Keyboard switches below the keys you select can be include free -on request only! Keyboard is untested so switches are included as-is.

Good addition to your collection or for Gold Recovery.

I have for sale 1 Commodore4Ever Wifi Modem NEW v2.01. Supports speeds from 300 to 9600 baud. For use with Commodore 64 or a Commodore128 in 64 mode. • Press F7 Menu and select modem type as Up9600 Baud and then 9600 Baud.

Here is an excellent condition Fingerprint Plus printer card. It is missing the original parallel port cord. I had an extra parallel cord from an Epson and I am including it (see the last picture).

Keyboard is clean for it's age.

Tested, Working Power Book 1400 CD-ROM drive, bezel has fallen off as is common with this drive. Also included is the Original PowerBook 1400 System 7 Installation CD-ROM. System 7.5.3 is included on this CD with all of the enablers and original software included with the Powerbook 1400.

Choose from the rail types displayed below. Include in your order the number associated with the picture for the rails that you want. Mounting Drive Rails for AT computers. Quantity Remaining: 1 Lot (of 2 Rails).

Commodore Amiga 1010 Floppy Drive. Very Clean - As-Is. parts or repair. disks show up as. Unit is sold AS-IS for. Picture is of the actual.

Cleaning out the attic! I don't have a way of testing this so i can only describe the item's physical condition The ribbon looks to be in good shape and the floppy door drive latch slams down well There are some minor scuffs and scratches. Please review all pictures USA buyers only as this will ship in a flat rate priority envelope. BUYER TO ACCEPT THE CONDITION OF THE ITEM "AS-IS"

So, I created this case for the Color Computer 3 series computers. The Tandy 1000 style case may be foundhere. Tandy Color Computer 3 series owners can connect their beloved computers to a VGA monitor using a Gonbes scan doubler (GBS8200, 8220/1VGA, 8220/2 VGA) and a specially made cable that combines H V sync (this is from my reading, I don't have a CoCo3 to test).

KEYCAPS FROM "APPLE. Most of the wide or narrow keycaps are still. These six keycaps are GONE, and are no longer available 500 keycaps from. AEK-II, so most keycaps. keycaps were. keycaps has a broken stem.

First picture is the kit. the second, an assembled reproduction Swyft card, last picture picture is an assembled kit next to a rare, original Swyft card (not included). In the early 1980s, Jef Raskin was at Apple Computer, leading a low cost appliance computer project called “Macintosh”.

Good addition to your collection or for Gold Recovery.

This sale is for one 1581 JiffyDOS DOS ROM chip. We are aAUTHORIZED JIFFYDOS DEALER.

From an 18 plane unit, this plane is similar to others in the 360 family, but this unit was ruggedized for military use. The matrix was attached to the yellow orange Kapton as a stiffener for the fragile wires.

Item is untested. Item being sold as is.

I have no use for it and no way to test it. The box cover has some rips and shelf ware but the condition of the drive looks good. You get what you see in photos.

We've tested it with NeXT ADB Components it works using an NeXT ADB keyboard and NeXT ADB Mouse on our. If you love old Macs, you know ADB keyboards are expensive and hard to find, and ADB mice are sticky and trouble-prone.

Perfect drop-in replacement for older 3.6v NiCd 60mAh batteries. You've probably heard that NiMH batteries cannot be charged in a NiCd charger, and this is indeed true for high-speed chargers. Note that newer fast chargers designed for NiMH batteries also work fine with NiCd.

Compatible with the Gonbes GBS-8200/8220 for a complete C128 80 column to VGA/LCD solution. Requires 5V DC for power. Documentation and support available atgglabs.us. Designed and assembled in USA with all new components.

Manufacterd by Kray cables to our standards. 4 pin mini din male connector to a 4 pin mini din male connector. Quality molded coiled cable. This will replace cables for all Apple and Macs that have the 4 pin keyboard connectors.

SN 8904038. Not much is known other than there are blue alps variants, and other white alps variants. White Alps SKCM Clones. Cleaning is recommended. 5 Pin Din Connector. 9 Pin Serial Connector. Off White Case.

VINTAGE COMMODORE 1541 DISK DRIVE. UNIT HAS NOT BEEN TESTED BUT DOES POWER ON, BUYING AS IS. NO REFUNDS ON VINTAGE ELECTRONICS. ENLARGE PICS FOR BETTER DETAILS.

You are bidding on a Vintage Apple M0110A Platinum Keyboard Made In Japan UNTESTED PARTS RESTORATION. I have multiple of these, some missing rubber feet, all about the same yellowing, have all keys, some screws are rusted, have some writing.

You are bidding on an inbox Atari 400/800 cassette software program "Britishes Heritage Jigsaw Puzzles Vol 2" from Thron EMI Video. This is for NTSC systems only. Check out my other auctions for the Vol 1 listing for this if interested. This comes in plastic box with documentation and cassette. Untested but was in quality storage for 20 years.