Valves & Manifolds

EZ-FLUID 1/2 in. Nominal Compression Inlet x 3/8 in. The angle valve is most often used where the water pipe enters the room from the wall. Solid Brass Body with Brass Stem. Compatible with copper or PEX (PEX installations require a stainless steel tube insert).

The RapidAir 3/4in. MaxLine compressed air piping system is designed for high-demand air tool users and longer air line runs in large buildings. It features high-density polyethylene HDPE tubing with an aluminum core to maintain any hand-bent shape for easy wall installation. 200 PSI operating pressure at 70F 140 PSI at 140F. Coupler Size in. 3/4, Max. PSI 200 at 70F, Pieces qty. 29. Master kit includes 3 outlet kits 2 tees 3/4in. tubing x 3/4in. male fitting 20 mounting clips Cutter and deburr tools 100 feet of 3/4in. HDPE/aluminum core multilayer tubing Tubing dimensions are 0.8in. I.D. x 1in. O.D.

3/4" FEMALE (NPT) PIPE THREAD TOP X 3/4" MALE (NPT) PIPE THREAD OUTLET TO TANK. The check valve is an important part of any air compressor. The air compressor check valve can be found on almost any compressor out there.

【Wide Application】 -Fit for small tractors, tractors loaders, log splitters, etc. Wide Application Fit for small tractors, tractors loaders, log splitters, etc. Tractors loaders. Max Flow: 25 GPM. Small tractors.

Max Flow: 21 GPM. Outlet port T: 3/4” NPT. Inlet port P: 3/4” NPT.

1/2" COMPRESSION TOP INLET X 1/2" MALE (NPT) PIPE THEAD OUTLET TO TANK. The check valve is an important part of any air compressor. The air compressor check valve can be found on almost any compressor out there.

Watts / Water Pressure Reducing Valve 1"- LFN45BM1-U. Condition is New. Shipped with USPS Priority Mail.

Flow 13 GPM. 2 Spool monoblock valve. Working ports SAE 8. Outlet port SAE 10. Inlet port SAE 10. Adjustable release valve. Handle mounting vertically or horizontally. Handle included.

Our PVC ball valves are made of white Schedule 40 PVC (polyvinyl chloride). They provide great strength and resistance to corrosion and chemicals. Their handles secure a sturdy opening and closing motion.

The coil is the most important part of a solenoid valve. Heavy Duty DC 12V 1/2" Brass Electric Solenoid Valve. It cannot be used for inflammable gas or fluids. If you want to use the solenoid valve for inflammable gas or fluids, you must buy the EXPLOSION PROOF valve.

11 GPM Monoblock Valves. 2 Spool valve with compact design allows for installations in tight areas. Anti-drop load checks on each spool. 21 GPM Monoblock Valves. Anti-drop load check on each spool. Can also be used as motor or single-acting spool (#8 SAE port plug required).

The Jandy AquaLink RS Valve Actuator is fully adjustable for versatile pool and spa automation. On/off toggle switch. We want you to count on us. We want to help you. We carry over 50,000 products. Bigger Selection.

The valve is operated with a handle covered with a vinyl grip. The handle lever makes a 90-degree quarter turns by opening or closing A valve. this lead free product has been rated nsf-61-g by UPC standards.

1 x 2 SPOOL 25 GPM RD522CCAA5A4B1 DOUBLE ACTING HYDRAULIC VALVE. Max Flow: 25 GPM. Spool: Two. 【Wide Application】 -Fit for small tractors, tractors loaders, log splitters, etc. Fit for small tractors, tractors loaders, log splitters, etc.

PART#: CV221502AJ, CV221502SJ. CAMPBELL HAUSFELD. Compressor Motors. Compressor Oil. Compressor Repair Parts. Vacuum Pump Parts. ALL BRASS CHECK VALVE - CLEANABLE - W/ TEFLON DISC VALVE AND QUICK CONNECT FITTING FOR UNLOADER LINE.

Water pressure: PN 1.6. Apply to hydraulic instability, water flow too fast, water purifiers, solar energy, gas heater and faucet. 1 x Water Pressure Reducing Valve. Material: Brass. 1 x Pressure Guage.

Valve stays close when the coil is de-energized, and it opens when energized. 2ACK Series solenoid valve has two holes in the bottom and can be mounted in any position. Armature Tube Material: Brass.

It might NOT work on other types of hose/pipe, especially non-plumbing system. Our goal is to provide you with the best quality product at the lowest price. l Two piece body with blowout proof stem.

For Use With Petrol, Diesel, Bio / Vegetable oil, Paraffin / Kerosene oil, etc. Size: 6mm (1/4"), 8mm (5/16"), 10mm (3/8"), 12mm (1/2"). In this way, this product can perfectly solve the problem that your vehicle is hard or slow to start because the fuel is running back through the lines.

Log Splitter Valve, Adjustable Detent A7. This is the next generation in log splitter valves. The detent is usually what wears out and causes valves to fail. This valve allows user to adjust the kick out pressure to what they need and as detent balls and grooves wear.

3/8" OD X 1/2" Female Thread. Our goal is to provide you with the best quality product at the lowest price. l Two piece body with blowout proof stem. l Maintenance free double o-ring stem seals. l Lead Free.

3/8" RapidAir Garage Piping. Blow Guns & Tire Inflators. This valve features a durable rubber covered steel handle that opens and closes the steel ball valve as well as 1/4" Male NPT threads on one side and 1/4" female NPT threads on the other.

<p>Leonard R/50 Mixing Valve rebuild Kit TM-50 TM-80. Brand new in the unopened package.</p>

1/4" Solenoid Valve by US Solid; Brass w Viton Seal, Normally Closed, Direct Lift, Electric 12V DC. Gasket / Diaphragm / Seal VITON. OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle).

Nominal flow: 11gpm (40l/min). The adjustable release valve and durable cast iron body is easy to use. Release valve adjustable. Relief valve: Adjustable. Spring center to neutral all spools. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

This is a must have for your pressure washer wand or whirl way. For those of you who have ever worked on a roof and switch wands know what a hassle it is to get all the way down to turn the machine off, or have another guy having to stand by the machine.

Condition is New. This valve is designed for protection against excessive pressure conditions only. To protect against temperature build up above 212 F, due to thermal expansion, refer to WILKINS Combination Temperature and Pressure Relief Valves.

Plumbing Supplies Lot 10 pcs of 1/4 Turn Brass Angle Stop Valve 3/8" OD COMP x 5/8" OD COMP. EZ-FLUID 1/2 in. Nominal Compression Inlet x 3/8 in. The angle valve is most often used where the water pipe enters the room from the wall.

Inline Ball 3/4" BRONZE Valve. Apollo 70-144-64. FULL CASE OF 10 VALVES. MADE IN THE USA! IF YOUR ITEM WEIGHS LESS.

The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever. When the angle of the valve lever changes sufficiently, the valve opens or closes. Thia float valve is a tank-mount style with an adjustable arm, and is made of PVC.

Connector: DN25 32mm. No bypass pipe is required, and the distribution pipe is simple, which can save a lot of space and distribution cost. Inlet / outlet thread depth : 17mm / 0.67in. Material: brass.

3 Way Flow Diverter Valve. Max Flow: 20 GPM. 3 Ports: #8 SAE (3/4”-16) Thread.

3/8" RapidAir Garage Piping. Blow Guns & Tire Inflators. This valve features a durable rubber covered steel handle that opens and closes the steel ball valve as well as 1/4" Male NPT threads on one side and 1/4" male NPT threads on the other.

Nominal flow: 11gpm (40l/min). The adjustable release valve and durable cast iron body is easy to use. Release valve adjustable. Relief valve: Adjustable. Spring center to neutral all spools. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

ASSE 1022 COMPLIANT OEM CARBONATOR. 1/4" BARB VENT. ANDERSON BRASS / McCANN'S. MANUFACTURED BY ANDERSON BRASS CO. FOUNTAIN MACHINES. DUAL CHECK VALVE. SAE J476 DRY-SEAL PIPE THREADS. ATMOSPHERIC PORT FOR VISUAL INDICATION OF PRIMARY CHECK LEAKAGE.

Size: 10mm (3/8"). Opening pressure：0.2bar. Fit for Carburetors and low pressure fuel system. -we have improve the OEM design to make it stronger than OEM! -Easy Installation! Material: Aluminu+NBR Rubber.

Uses On 4", 6", 8", 10", 12" And 14" T550 Original (Old Style) And T550A Improved Flow Frost Free Sillcocks. Legend 108-903 Vacuum Breaker Repair Kit For Original T-550 And Improved Flow T-550A Frost Free Sillcock.

Brass ball valve (Full port). 600WOG (Water,Oil,Gas). Quantity: 1 valve. Valve Construction Steel handle with plastic cover. Thread Type FNPT x FNPT. Connection Type.

It is characterized by very long service life 12" 11" 6.2" and open center system with pump-to-tank flow. It is easy to use. Open center system with pump-to-tank flow 11gpm. Nominal flow: 11gpm (40l/min).

_gsrx_vers_525 (GS 6.6.5 (525)). (bcd - 1-10-a). We appreciate your consideration!

It might NOT work on other types of hose/pipe, especially non-plumbing system. l Two piece body with blowout proof stem. l Maintenance free double o-ring stem seals. Our goal is to provide you with the best quality product at the lowest price.

Union SharkBite push-fit ends compatible with Copper, CPVC, and PEX. New unit - Box has wear from storage - See pictures for details.

Adjustable Flow Rate: 0-30 GPM. Port Size: 3/4” NPT. Flow can vary from closed to fully open depending on the position of the lever. EX (Excess Flow): Flow coming from this port is pressure compensated.

• Part number: 6352012. • Connection: 18” Wire Leads.

This check valve / unloader can be used in a wide variety of applications. This valve features 1/4" male NPT threads to connect to your tank as well as 3/8" male compression threads for the inlet. When installing this part it is important to be careful with how much you tighten it and where.