Star Trek Models & Kits

This is a Star Trek Discovery USS Buran NCC-1422 Ship Replica made by the good people over at Eaglemoss. This figure is made of a diecast and plastic body and is roughly 8.5 inches long. It comes with a display stand and collectors booklet. A great collectible for any fan of Star Trek. Recommended Age: 14 Condition: Brand New and Sealed Dimensions: 8.5" X Eaglemoss Star Trek Discovery USS Buran NCC-1422 Ship Replica.

This is a resin prop model kit of the phaser used by the Enterprise crew in the film "Star Trek 3, The Search for Spock". Kit is cast in two pieces of solid resin, gray for the main body and black for the detachable Phaser I part. Kit requires finishing and painting to make the completed prop shown on the box, resin kit finishing instructions are included. Kit is cast in solid, high-quality artist-grade resin, not 3-D printed material. Prop is full-sized, 1:1 scale, and measures approximately 8 inches long and 6 inches tall. This is a static prop kit with no moving parts and, of course, cannot be made to fire anything. Buyer pays calculated shipping by Priority Mail (US) or USPS Airmail (foreign). We combine shipping on multiple items.

This is a resin prop model kit of the Klingon disruptor from the original 60s Star Trek series. This prop can be seen used by the Klingons in several episodes and was also used with a different paint scheme as the Romulan disruptor in a few installments. Kit includes four pieces cast in solid gray resin. Kit requires finishing and painting to make the completed prop shown on the box, resin kit finishing instructions are included. Kit is cast in solid, high-quality artist-grade resin, not 3-D printed material. Prop is full-sized, 1:1 scale, and measures approximately 12 inches long and 6 inches tall. This is a static prop kit with no moving parts and, of course, cannot be made to fire anything. Buyer pays calculated shipping by Priority Mail (US) or USPS Airmail (foreign). We combine shipping on multiple items.

This is a resin prop model kit of the scanner device as seen in the series Star Trek: Enterprise. Kit is cast as a single piece in solid gray resin. Kit is cast in the 'open' position and does not move up and down. Includes two different graphics based on scenes from the show, prop can be built with either graphic or a custom one of your design. Kit requires finishing and painting to make the completed prop shown on the box, resin kit finishing instructions are included. Kit is cast in solid, high-quality artist-grade resin, not 3-D printed material. Prop is full-sized, 1:1 scale, and measures approximately 6 inches tall and 3 inches wide. Buyer pays calculated shipping by Priority Mail (US) or USPS Airmail (foreign). We combine shipping on multiple items.

The kit assembles easily and is the perfect size for any bookshelf. • Easy snap assembly. • ALL PARTS pre-decorated, NO paint required. KIT FEATURES.

U.S.S. ENTERPRISE NCC-1701-F (FEDERATION LIVERY).

Snap together assembly. Nearly 12" long.

This is a resin model kit of the phaser prop used by the crew in the series 'Star Trek: Voyager'. Kit is cast in two pieces of solid resin, gray for the main body and black for the emitter front. Kit requires finishing and painting to make the completed prop shown on the box, resin kit finishing instructions are included. Kit is cast in solid, high-quality artist-grade resin, not 3-D printed material. Prop is full-sized, 1:1 scale, and measures approximately 8 inches long and 2 inches wide. This is a static prop kit with no moving parts and, of course, cannot be made to fire anything. Buyer pays calculated shipping by Priority Mail (US) or USPS Airmail (foreign). We combine shipping on multiple items.

This is a resin model kit of the Phaser used by the crew in the new Trek series, "Star Trek: Discovery". Kit is cast in two pieces of solid resin, dark gray for the main body and light gray for the emitter front. Kit requires finishing and painting to make the completed prop shown on the box, resin kit finishing instructions are included. Kit is cast in solid, high-quality artist-grade resin, not 3-D printed material. Prop is full-sized, 1:1 scale, and measures approximately 7 inches long and 5 inches tall. This is a static prop kit with no moving parts and, of course, cannot be made to fire anything. Buyer pays calculated shipping by Priority Mail (US) or USPS Airmail (foreign). We combine shipping on multiple items.

Include Base with ball joint.

This is a resin model kit of the phaser carried by the crew of the Enterprise D in seasons 2-7 of Star Trek: The Next Generation. Kit is cast as a single piece in solid gray resin. Kit requires finishing and painting to make the completed prop shown on the box, resin kit finishing instructions are included. Kit is cast in solid, high-quality artist-grade resin, not 3-D printed material. Prop is full-sized, 1:1 scale, and measures approximately 7.5 inches long and 2 inches wide. This is a static prop kit with no moving parts and, of course, cannot be made to fire anything. Buyer pays calculated shipping by Priority Mail (US) or USPS Airmail (foreign). We combine shipping on multiple items. If you are purchasing more than one item, please wait for your invoice with total before paying to ensure you are getting the best shipping rate.

This Lighting Kit makes it easy for you to light up your fiber optic fiber and install it in your project. It's very easy to customize this kit to fit your needs. You can hook up from 1 to 3 illuminators to one battery connector.

This board simulates the sequential landing lights to guide the shuttles into the Landing Bay. Landing Bay Sequential Runway/Landing Lights For Star Trek Enterprise NCC-1701 Refit (Video Below!). Landing Bay Sequential lights.wmv - YouTube.

The USS DISCOVERY NCC-1031 has been painstakingly recreated in die-cast and plastic materials. including the" DISCOVERY NCC-1031 ".

Brand new Playmates Classic Star Trek NCC-1701 USS Enterprise from the original series. I sure would like to keep it. 
 I try very hard to either ship on the same or at least the very next business day. Please look at my seller ratings as I am to provide the best customer service.  As a fellow collector and lifelong trekkie, I aspire to deal in only quality items so invite you check out my other great Star Trek collectibles in my eBay store “The Dilithium Mine” (https://www.ebay.com/str/thedilithiummine) Thanks for Looking –Mark

Collection Model. Die Cast model with plastic parts.

Polar Lights Star Trek Klingon K't'inga Lighting Kit.

Polar Lights Star Trek NX-01 Enterprise (Snap).

I have a few sets of new, unused decals that I've had and no longer intend on using. For the AMT 1/1400 enterprise E.

V'GER Special Edition.

Small Kits, Big Detail! When the sky isn’t the limit, these mini kits allow you to display various in-scale versions of the Enterprise on one shelf! This 1/2500th-scale Cadet Series kit includes the Enterprise-C from Star Trek: The Next Generation.

The fan favorite film, Star Trek II: The Wrath of Khan, re-introduced the tyrannical villain, Khan Noonen Singh back to the Star Trek mythos. KIT FEATURES • Last released in 2010!

Collection Model. Die Cast model with plastic parts.

This is a resin prop model kit of the MACO EM-33 Plasma Pistol as seen in the Star Trek series, "Enterprise". Kit consists of ten resin pieces cast in black or gray resin, see photos. Kit requires finishing and painting to make the completed prop shown on the box, resin kit finishing instructions are included. Kit is cast in solid, high-quality artist-grade resin, not 3-D printed material. Prop is full-sized, 1:1 scale, and measures approximately 8 inches long and 6 inches tall. This is a static prop kit with no moving parts and, of course, cannot be made to fire anything. Buyer pays calculated shipping by Priority Mail (US) or USPS Airmail (foreign). We combine shipping on multiple items.

Molded in Color (9-Total Parts).

All parts are complete, includes stickers and instructions. Thanks for looking!

New and out of production Eaglemoss Star Trek Probert Concept USS Enterprise C Built & Painted W/Magazine. Condition is New.

A STAR TREK MODEL KIT.

They do not allow for us to send combined invoices once the cases have opened. Net proceeds from the sale of these goods and financial donations from the community make it possible for us to operate our free job training programs.

Resin Kit. No longer in production. Otherwise complete and unassembled.

This is a Star Trek Discovery USS Shran NCC-1413 Ship Replica made by the good people over at Eaglemoss. This figure is made of a diecast and plastic body and is roughly 8.5 inches long. It comes with a display stand and collectors booklet. A great collectible for any fan of Star Trek. Recommended Age: 14 Condition: Brand New and Sealed Dimensions: 8.5" X Eaglemoss Star Trek Discovery USS Shran NCC-1413 Ship Replica.

The dorsal engine also features an attached fore and aft torpedo launcher system. The parts are complete and intact, and partially painted, and they will complete a Wilkerson class destroyer with an appropriate saucer section.

Star Trek Classic Enterprise 1701 1/350 Scale 50th Ann Edition Factory Sealed!!. Condition is New. I will combine shipping if requested. Please see my ebay rating. It is important to me

Snap assembly.

YOU GET 4 FIBER OPTIC MICRO ILLUMINATORS, YOUR CHOICE OF COLORS. >Light up your fiber optic fiber the EZ way with these white, colored or color changing micro illuminators. SUPER SAVINGS! I have White, White Flashing/blinking, Blue, Red, Green, Yellow/amber, Orange, UV Purple Black Light and Rainbow Color Changing.

The silhouette featuring its signature saucer-shaped primary hull was still underlapped by a lower secondary hull. Newly swept back pylons held modernized engines that were capable of warp factor 9.

The kit has the stickers and the instructions/ The bag that has the base has been opened and we took a photo of the piece outside the bag. It is a nice Model Kit.

Open Box but complete Star Trek The Enterprise Incident Legendary Space Encounter set with fiber optic lighting.

Star Trek USS Discovery NCC-1031 Model Kit.

Collection Model. Die Cast model with plastic parts.

Looks like 3 or 4 kits, not sure if these are complete, sold as is. Disc hull of kit on upper left is about 7 3/8" across widest point.

Star trek USS Excelsior. KIT is factory sealed! DON’T FORGET 5 FOR 5. Maximum weight is 64 oz. out of production.

AMT Star Trek Klingon K'T'Inga-Class Battle Cruiser Model 1:537 - New - Sealed. Condition is New. I will combine shipping if requested. Please see my ebay rating. It is important to me

Extensive decals sheet includes markings for Bird-of-Prey and all markings needed for the U.S.S. Grissom. Snap assembly.