Pipe, Hose & Tubing

(10) 1/2" Pex Brass Elbow. -(10) 1/2" Pex Brass Coupling. 100 piece lot 1/2" pex lead free fittings.

Hose is clean. We have lots of surplus hose available in all types and sizes.

They are the only type of accessories that can be installed prior to the installation of PEX Tubing. Simply install them every 2-3ft along the run of the pipe and then snap in the tubing. copper pipes and CPVC pipes.

Only for underground use. Durable polyethylene will last for years and years.

PEX x PEX elbows are used to connect two PEX pipes together. Standards & Certifications Crimp Connection System (PEX Crimp Tool + Copper Crimp Rings);. 3/4" PEX x 3/4" PEXElbow. Manufactured to ASTM standard F1807, certified for potable water applications (NSF 61-G), compatible with any SDR-9 (U.S. standard) PEX tubing.

<p align="left">Aeroquip 303-5 1/4 fuel line.</p><p>Diesel fuel hose</p><p>Non corrosive ends. </p><p>Comes with an adapter.</p><br><p>This is an auxiliary fuel line used on the MEP802A MPE-803A MEP-804A military generators and other sizes as well.</p><br><p>1/4". Roughly 20' long</p><br><p>Not all items will look just like pictured but all will look similar and will be new. These items may be dirty from being in a toolbox while on a mission.</p>

Inlet/Outlet sizes: 3/4" Male NPT (MPT) threaded, U.S. standard threads. Plate & Outlets Material: AISI 316L Stainless Steel. Plumbing Systems. Brazing Material: 99.9% pure copper. Radiant Floor Heating.

Backflow Temperature. Atmospheric Vent. If you have. safe and secure. It is fast. In the rare. Most orders.

1/2" copper crimp rings are used together with a PEX crimp tool and 1/2" crimp style PEX fittings (brass or poly). Top quality PEX copper crimp rings made in the USA by Sioux Chief from annealed copper.

3/4" PEX x 3/4" FPT Adapter (PEX x Female Threaded). Standards & Certifications Crimp Connection System (PEX Crimp Tool + Copper Crimp Rings);. Manufactured to ASTM standard F1807 and compatible with any SDR-9 (U.S. standard) PEX tubing.

With 2 Female JIC Swivels, 3/8" threads are 9/16x 18.

The Female JIC threads on this assembly are 3/4 x 16. We can assemble any hosewith any fitting.

They are the only type of accessories that can be installed prior to the installation of PEX Tubing. Simply install them every 2-3ft along the run of the pipe and then snap in the tubing. copper pipes and CPVC pipes.

<br>1/2" Brass PEX Fittings Crimp Style <br> <br>You Will Get: <br> <br>25 Brass PEX Tees <br> <br>25 Brass PEX Couplings <br> <br>25 Brass PEX 90 Degree Elbows <br> <br>Lead Free Brass

10 units- 1/2" PEX Brass 90° Elbows. 10 units- 1/2" PEX Brass Tees. 10 units- 1/2" PEX Brass Couplings. PEX Brass is suitable for Lead Free Brass.

Fitting – 1/4” male NPT (1/4-18 threads). NPT crimp fittings. Hose –1/4” SAE100R2AT. Hose desc Finished Length - 72". RANGE: minus 40 deg to 250 deg F.

Compatible with PEX A, PEX B, PEX C. 10 pcs - 1/2" PEX Elbow. 10 pcs - 1/2" PEX Coupler/Reducer. 10 pcs - 1/2" PEX TEE. Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube.

Product Type: 2-Wire Hydraulic Hose. 7.09" minimum bend radius. Black, oil-resistant synthetic rubber (nitrile) tube reinforced with two braids of high-tensile steel wire. Covered with black, thin synthetic rubber that is oil-and abrasion-resistant.

PEX x PEX elbows are used to connect two PEX pipes together at a 90-degree angle. (50) Poly Alloy 1/2" PEX x 1/2" PEX Elbows, Lead-Free. (PEX x PEX x PEX). Standards & Certifications (PEX x PEX). Crimp Connection System (PEX Crimp Tool + Copper Crimp Rings);.

For PEX, CPVC, Copper Pipe. Screws are not included as you have to get the right length depending on how deep your stud or board is. Cost-effective and labor-saving solution for any plumbing or radiant heating project.

Inlet/Outlet sizes: 3/4" Male NPT (MPT) threaded, U.S. standard threads. Plate & Outlets Material: AISI 316L Stainless Steel. Plumbing Systems. Brazing Material: 99.9% pure copper. Radiant Floor Heating.

Can also be used for Open Loop Radiant Heating Systems as well as distribution lines for open loop heating systems. Plumbing to fixtures to replace copper piping. Any type of line dealing with potable/drinking water.

Connect PEX tubing to a copper pipe. This crimp style PEX fitting can be installed using the following connection systems Crimp Connection System (Copper Crimp Rings + PEX Crimp Tool). Manufactured to ASTM standard F1807 and compatible with any SDR-9 (U.S. standard) PEX tubing.

Style- 100ft. SAE 100R2AT-compliant for pressure. Pattern- Hose. If you are designing at the OEM level our.

Interstate Pneumatics HSR90-SWA 1/2" NPT Female Brass Swivel Assembly For HSR90 Hose Reel. Interstate Pneumatics HSR90-SWA 1/2" NPT Female Brass Swivel Assembly For HSR90 Hose Reel. Eliminates kinks and twists in your hose by swiveling a full 360 degree.

The Female JIC fittings on this assembly is standard fitting for the 3/8" hydraulic hose. The threads size on this assembly is 9/16-18.

Tube Talons are used to attach such pipes as PEX, Copper and CPVC to wooden surfaces (studs, joists, plywood, etc.). Can be used both in plumbing and radiant heating installations. Our Tube Talons are designed to provide a small clearance (~1/8") between the wooden surface and the tubing, which eliminates problems associated with tubing thermal expansion.

Product Type: 2-Wire Hydraulic Hose. minimum bend radius. Black, oil-resistant synthetic rubber (nitrile) tube reinforced with two braids of high-tensile steel wire. Covered with black, thin synthetic rubber that is oil-and abrasion-resistant.

The Male Pipe fittings are standard to 1/2" hose. The thread size 1/2-14. Example it could be 3/8 or a 5/8 threads. We can assemble any hosewith any fitting.

THIS STRONG, BUT FLEXABLE TUBING CAN BE USED IN MANY APPLICATIONS.

Typically used for horizontal and vertical pipe runs. copper pipes and CPVC pipes. Can be used with any type of tubing with 3/4" CTS;. Snap-in design allows for fast and easy installation;. Cost-effective and labor-saving solution for any plumbing or radiant heating project;.

1/2" hydraulic assembly, with 2- Female JIC Swivel fittings. The Female JIC fittings on this 1/2" hose are standard for the 1/2". The threads on the female JIC are 3/4" x 16.

It is easy to use and cuts with standard hand tools. Conveniently coiled for easy transportation. Never worry about rusting underground again. Only for underground use. Durable polyethylene will last for years and years.

Tube Talons are used to attach such pipes as PEX, Copper and CPVC to wooden surfaces (studs, joists, plywood, etc.). Can be used both in plumbing and radiant heating installations. Our Tube Talons are designed to provide a small clearance (~1/8") between the wooden surface and the tubing, which eliminates problems associated with tubing thermal expansion.

Typically used for horizontal and vertical pipe runs. copper pipes and CPVC pipes. Can be used with any type of tubing with 1/2" CTS;. Snap-in design allows for fast and easy installation;. Cost-effective and labor-saving solution for any plumbing or radiant heating project;.

Box of (300) Foamboard Staples for 1-1/2" and 2" Foamboard. Foamboard staples for use with 1-1/2" or 2" thick foamboard insulation. Our friendly and knowledgeable staff is here to serve your needs. Model# PXFBS20.