Other Valves & Manifolds

The adjustable release valve and durable cast iron body is easy to use. Release valve adjustable. Relief valve: Adjustable. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

The RapidAir 3/4in. MaxLine compressed air piping system allows you to design and install your own personalized air system any way you want. MaxLine uses a double O-ring compression system that is virtually leakproof.

Log Splitter Valve, Adjustable Detent A7. This is the next generation in log splitter valves. The detent is usually what wears out and causes valves to fail. This valve allows user to adjust the kick out pressure to what they need and as detent balls and grooves wear.

This valve is new, open box surplus. ALASKA, HAWAII, APO/FPO & U.S. TERRITORIES.

Nominal flow: 11gpm (40l/min). The adjustable release valve and durable cast iron body is easy to use. Compact design use in small tractors, tractors loaders, log splitters, etc. Tractors loaders. Small tractors.

Hydraulic solenoid valve D03 footprint. 15 GPM maximum flow rate. 4 way, 3 position with tandem center (P open to tank with ports A & B blocked) in the center position. Includes bolt kit.

Hydraulic solenoid operated selector/diverter valve. #8 SAE o-ring boss ports. -4 degrees to +158 degrees F working temperature. Up to 3 valves can be manifolded together with all thread rod (not included).

The adjustable release valve and durable cast iron body is easy to use. It has 4 way 3 positions, and the spring center to neutral all spools. Log splitters. Compact design use in small tractors, tractors loaders, log splitters, etc.

AUTOMATIC VALVE L2003AAWR WITH 7134-9DB COIL 24VDC. New, old stock. Shipped with USPS First Class Package.

Nominal flow: 11gpm (40l/min). Double Acting. Equipped with 6 spools, and #8 SAE O-ring in/out ports. Cast Iron Body. Relief valve: Adjustable. Compact Handle Design. 【 WIDELY USED 】 - Fit for small tractors, tractors loaders, log splitters, and etc.

Hydraulic Diverter Valve which can be used to switch pump flow from one circuit to another. 16 GPM Flow. Ports: #12 SAE (1-1/16″-16 O-Ring Boss) Thread. Maintained Rocker Switch. Temperature: -40 to 100 °C (-40 to 212 °F) with Buna N seals.

EZ-FLUID 1/2 in. Nominal Compression Inlet x 3/8 in. The angle valve is most often used where the water pipe enters the room from the wall. Solid Brass Body with Brass Stem. Compatible with copper or PEX (PEX installations require a stainless steel tube insert).

Ingersoll Rand Condensate Valve Kit #42590083 w/ Solenoid #22410286. Condition is New. Shipped with USPS Priority Mail.

Nominal flow: 11gpm (40l/min). The adjustable release valve and durable cast iron body is easy to use. Spool count: 3 Spool. Release valve adjustable. Relief valve: Adjustable. Spring center to neutral all spools.

Nominal flow: 11gpm (40l/min). The adjustable release valve and durable cast iron body is easy to use. Release valve adjustable. Relief valve: Adjustable. Spring center to neutral all spools. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

Husco valve N5002-A1. In most situations you can buy a Square Trade warranty on the item for a small fee.

Product Features This pneumatic foot pedal valve is 3 way 2 position, high performance. This pneumatic foot pedal valve is 3 way 2 position, high performance. 1 x Pneumatic Foot Pedal Valve. Action: direct motion.

This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications. The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.

Equipped with 3 spools, and #8 SAE O-ring in/out ports. Spool count: 3 Spool. Double Acting. Relief valve: Adjustable. Compact Handle Design. 【 WIDELY USED 】 - Fit for small tractors, tractors loaders, log splitters, and etc.

Motorized Ball Valve- 1" Stainless Steel Electrical Ball Valve with Full Port. The body and the valves itself are made of lead-free SS304. This valve expends no energy once in position, so it can be run continuously without ever overheating.

New surplus.

Event an item is missing, we will precess your claim and send out the missing item(s) promptly. Push End Connections Is Comparable to Sharkbite that allows for quick, permanent connections Non-Removable!

Warning: Do not use this productwith water systems that convey or dispense water for human consumption. Proplus 252106 Conventional Port Ball Valve, 3/4 In. • NPT Threaded ends to ANSI B1.20.1. • Each valve individually tested.

The handle lever makes a 90 degree quarter turns by opening or closing A valve. this lead free product has been rated nsf-61-g by UPC standards.

This 12V DC brass electric solenoid valve easily replaces broken valves for use with water, air, and other low viscosity fluids. The unit operates on 12V DC power and can withstand temperatures of 23F to 176F.

Watts 3/4 in. Bronze 007M3 QT Double Check Valve Assembly Backflow Preventer. Shipped with USPS Parcel Select Ground.

The valve is operated with a handle covered with a vinyl grip. The handle lever makes a 90-degree quarter turns by opening or closing A valve. this lead free product has been rated nsf-61-g by UPC standards.

NPT taper ANSI B1.20.1 Threaded. Double seal system allows flow can go both directions.

The adjustable release valve and durable cast iron body is easy to use. Spool count: 3 Spool. Release valve adjustable. Relief valve: Adjustable. Spring center to neutral all spools. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

This NorTrac 3-Position, 4-Way Directional Control Manual Log Splitter Valve features heavy-duty cast iron main housing, an integrated pressure relief valve, and adjustable detent pressure that's ideal for log splitter applications and any mobile hydraulic application where the directional valve is remotely located from the pump supply. Adjustable Release Pressure PSI 1,015, Directional Control Manual operator, Inlet Port in. 3/4 NPT, Max. Flow GPM 25, Max. PSI 3,100, Outlet Port in. 3/4 NPT, Spool qty. 1, Working Port in. 1/2 NPT. Heavy-duty cast iron main housing for lasting performance Detent device has a spring-centered function in one direction and pressure-released detent in the other direction Adjustable handle allows you to operate the handle from several positions 25 GPM fl.

Construction: Brass body & Internals, Stainless Steel Poppet with Fluorocarbon O Ring. The CR Series Valve is an adjustable relief valve. Inlet is 1/4 NPT with Vibraseal thread sealant. Weight: 2.4 oz.

The adjustable release valve and durable cast iron body is easy to use. It has 4 way 3 positions, and the spring center to neutral all spools. Compact design use in small tractors, tractors loaders, log splitters, etc.

3/8" OD X 1/2" Female Thread. Our goal is to provide you with the best quality product at the lowest price. l Two piece body with blowout proof stem. l Maintenance free double o-ring stem seals. l Lead Free.

1/4" Solenoid Valve by US Solid; Brass w Viton Seal, Normally Closed, Direct Lift, Electric 12V DC. Gasket / Diaphragm / Seal VITON. OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle).

Automatically vents unwanted air from any hydronic installation. If you want to send it to another location change. Once opened it is now used. If new and sealed. Maximum Temperature 230 Degrees Fahrenheit.

This is the U.S. Solid1/8" 5 way 2 Position Pneumatic Electric Solenoid Valve. Pneumatic types of valves can be found in a wide array of industries. They are also found in air lift devices like forklifts.

3/4", Boiler Water Pressure Relief Valve, On Hydronic Boilers Up To 550,000 BTU, Standard Pressure Relief Setting Is 30 PSI, Iron Body With Bronze Inlets, ASME Rated.

The coil is the most important part of a solenoid valve. Heavy Duty DC 12V 1/2" Brass Electric Solenoid Valve. It cannot be used for inflammable gas or fluids. If you want to use the solenoid valve for inflammable gas or fluids, you must buy the EXPLOSION PROOF valve.

This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications. The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.