Other Collectible Tools

Founded in 1890. pat no. 1984634 MADE IN USA.

ANTIQUE WOLFF FORDING CO. BOSTON MASS. CAST IRON LEATHER PUNCH TOOL PRESS RIVETER. Cast iron press is clean, intact and in excellent condition. Nicely embossed - WOLFF FORDING CO. BOSTON, MASS.

No maker mark; marked G. Swaddle (owner); includes beam protectors.

MODEL INFO:This tool adapter only fits on the LeathermanSuper Tool 200 (it does not fit the regular SuperTool, nor any other model). Adapter, bits and case only- the pictured SuperTool 200 is there to show how to use the adapter, and it is not included.

It is approx. 12-1/2" long.

17"x54" Nylon net with 10"-39" adjustability on each side. (Max length=132", Min length=74") fully adjustable load restraint. Eliminate cargo shifting. Great for all trucks, vans, and SUVs. Easy on!

We have for sale the complete axe book collection as written by Thomas Lamond. These books will not be reprinted again by his wife so when they re gone thats it.

Vintage small brass hammer, possibly used by a jeweler or gunsmith? Weighs only 7oz & approx 8" long. No makers marks, nice used condition. Comes as pictured.

Official 2017 Snap-On beach towel. Reads 'Gearhead Grillin'.

Wilmar 3 Pc. Lock Grip Plier Set New Old Stock. Includes: 5”, 7, and 10” pliers with wire cutters and drop forged jaws, Box has blemishes from storage. See photos for additional item details Pay Pal only. Shipping to the lower 48 Continental United States only. Sold as is as seen. All sales are final

4.15" overall length with an internal depth of 2.95".

All tool wrap is 24" wide x. 002" thick. The #309 can be heated to max temperature of 2240 (F) and the #321 to 2000 (F).

Of tin smith tools with the table plate. there are nine pieces, including the mount screw and nut ,this is a nice.

All tool wrap is 24" wide x. 002" thick. The #309 can be heated to max temperature of 2240 (F) and the #321 to 2000 (F).

This is a cast iron fence stretcher repair tool for barbed wire fences. It was made by Durbin Durco of St Louis, Missouri. Stretcher is cast iron and is 20-1/4" in length. Tool is in very good used condition.

OD with window gen m2.

They are 3" 1/2 long or 90mm.

Lightly used with little signs of putty. See pics for condition.

Rainier, Oregon. Split to the celluloid on the lower left corner. Washington state residents must add 7.9%.

Black 30 gen m2.

Really nice piece and in great, working condition.

The 5700 Bench opener machine is the professional's watch case openers. This device can be used for opening and closing waterproof watch cases efficiently. A necessary tool for watchmaker. This 5700 BENCH CASE OPEN Machine is a set of bench case opener for screw-in water-proof case.

Big stuff like duck decoys more, little stuff often free. I include rulers in the pictures. If these lures have plastic tubing on the hooks, I strongly adivse ye to remove it. plastic tubing "protectors" that have ruined more lures than they ever saved.

One wheel has been used and cleaned, the 1/16" The others are sealed. See photos. Wheel sizes: 1/64", 1/32", 3/64", 1/16", 5/64", 3/32", 1/4". One wheel is missing. Original box sold by Mohawk. Made in USA.

Very unique vise marked Boys Tech High #861, 2 1/2 in. only one of this design that I have seen. Boys Tech High was the 1st trade school in the USA, Located in Milwaukee Wi.

Do you like collecting unusual things?. Particularly if they are patented?. Well, look no further. This is a tool that most tool collectors never heard of. And many of the ones that did hear of it, had no idea how it works.

A necessary tool for watchmaker. The 5700 Bench opener machine is the professional's watch case openers. This device can be used for opening and closing waterproof watch cases efficiently. This 5700 BENCH CASE OPEN Machine is a set of bench case opener for screw-in water-proof case.

They have a screw and ?. M and say Germany on them. The blades are 4" long.

Seems to be the letters S.D. after Tiger. Much pitting and wear.

Lot of 19 assorted German/Porsche tools. Hazet- DIN 895 -Stubai-Heyco-Dowidat-Matador-Chrom-Vanadium.

This auction is for a vintage EVERHARD Mfg. Company (Canton, O.) leather working tool. This 7 3/4” long tool has a serrated wheel at the end. The ball bearing wheel has a 1 1/2” diameter and spins freely. The solid wood handle is 5 1/2” long with no breaks or cracks. The brass collar is intact. No broken teeth are seen. In “AS FOUND” condition and has not been cleaned. Rust, dirt, and grime are present. Clean up may be necessary. No previous owner’s name, initials, numbers or marks present. A great addition to any serious leather working tool collection!!!

Insert Sheet Says: Forged Steel The Best Revolving Punch made. Excellent Condition With Original Box & Insert Sheet.

Up for sale is One Dozen 7/64" Drill Points for Yankee Drills by North Bros Mfg Co.

One appears to be a hole punch, while the other--who knows. both are quality tools and ready to use.

The pictures are of the actual item.

Wm Johnson marked Newark woodworking pinch dogs.  Various staggered sizes.   Good shape, they dont look used all that much.   Please check pictures.   3/4 to 2" sizes    .

The tool is used, shows wear but is in good working condition.

Rivet-Eze II Reuter Inc. Sickle Bar Rivet Tool. Inspection and testing are done to each item on a limited basis.

Has a standard head and a ball peen head. Magnifying glass is set in a rubber base. Hole in handle for easy hanging storage or to attach a lanyard. Weighs about 5 oz.

You are going to bid on an outstanding vintage collection of file and chisel handles. They are all in working condition, they are mainly clean. Made by the highest quality vintage craftsman, Lutz and others, this is a wonderful set. ☆STEAMPUNK APPROVED☆ Please review pictures as they offer more complete details on the items for bid. Any questions, please ask. While you're at it, please check out my other AFFORDABLY priced auctions. I do combine shipping, just message me. As always, thank you!

Axe is in Great Condition and super nice logo and great solid handle. Sizes are Approx., Head is 5 1/2" long x 3 15/16 " cutting edge ,with handle 14 3/4" in length. See photos for condition and content details.

This is a 1 inch rabbit plane. It has a scoring knife, a cutting blade and a depth stop.  Needs to be sharpened if you want to use it.

Check Pics.

Here is another great old vintage tool Lot of Stone Mason Tools, This Lot includes 2 unmarked stone hammers, 1 Hammer weighing 1 lbs 14 Ounces and measuring 14” Long with a good handle, next is another Stone hammer weighing 1 lbs 15.9 Ounces and measuring 13” Long with a good handle, note, the hammer head is a little loose and may need another hammer head wedge, next is a lot of 13 Cold Steel Chisels, some are marked by, Stortz, ICIW, Kraeuter, Delaware, Others Unmarked , there are 15 pieces to this set. The Chisels range in size from only 3-1/2” Long to 12” Long. Some of the metal areas of this lot are Pitted, Rusty and need a good cleaning. Due to the weight, we will ship Medium Flat Rate Priority Mail Box, to save on shipping fees.